This 2" diameter x 1-3/4" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.
Features:
Specs:
Endcaps easily install on the same brackets that your side guide rollers are mounted to. Just attach each endcap to the shaft on the outside of the roller bracket, and then secure the endcap in place with a cap nut (or pal nut). Not only do the endcaps provide more surface area for better boat-to-trailer contact, but they also help to keep your boat from being scratched by sharp bracket edges.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part no YR220-4. This is a Yates endcap for side guide boat rollers on your boat trailer. This end cap will mount to a side guide roller on your boat trailer and it provides additional surface area for improved boat-to-roller contact. This part is constructed of a heavy-duty rubber material. It is made in the USA and this same cap will install on the same bracked that your side guide rollers are mounted to. You will just attach this endcap to the shaft on the outside of the roller bracket and then secure the end cap in place with a cap nut or a pal nut.
These endcaps provide more surface area for better boat-to-trailer contact and they also help to keep your boat from being scratched by sharp bracket edges. We're going to do a few measurements on this end cap. The overall diameter is 2 inches and the width or the height will be 1 3/4 inches. This endcap will install onto a side guide roller that has a half inch diameter shaft and that should do it for part no. YR220-4..
Average Customer Rating: 4.8 out of 5 stars (51 Customer Reviews)
This 2" diameter x 1-3/4" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.
I appreciate your interest in my feedback on the roller had to do a little modifications on but it is overall a very good product.
I had to order the replacement rollers due to the press nuts on the shafts of both side rollers came off due to vibration. I use a lot of gravel roads in Canada fishing and the press nuts do not stay on so I lost parts of both side rollers. I am fixing this problem by drilling the shafts and installing a cotter pin that should not come out unless I take it out. I ordered the boat guide system from you about two years ago and that is the only thing that has gone wrong.
Mike T - 07/08/2017One of the few companies that treat you as a customer, not just a consumer. Great customer service, delivery time and fair prices. Have and will continue to order form etrailer. Thanks again.
After searching other sites for boat trailer parts I decided to order from etrailer because of the wide selection and prices of their products. I quickly received the roller guides and shaft pins I ordered. The parts fit perfectly and were very easy to install. I will definitely use etrailer for all my trailer needs in the future.
I have a CE Smith trailer boat guide-on for about 15 years, and the top cap nut finally came off from road bouncing. The top roller guide was lost. These items allowed me to repair the guide. etrailer.com was quick to ship the parts with a fast carrier.
Ordered these parts before as I spend over 3 weeks on some of the worse roads in Ontario fishing every summer. Something always seems to rattle loose. But these parts are an exact fit to repair the trailer and much cheaper than replacing the entire unit.
Alan - 08/03/2017Great job just what i needed
The orginal guide rollers caps on my pontoon boat trailer were getting hard (and brittle) but the larger rollers remained soft. One shaft was bent causing that roller not to turn properly so I replaced the shaft at the same time as the caps. A 5 min repair while the boat was off the trailer. Thanks for making the repair quick and easy.
Yates Endcap for Side Guide Roller, 12-3/4" X 1/2" Roller Shaft and 9" X 1/2" Roller Guide are a perfect fit on my 1989 Stratos Trailer. I didn't have to do anything, but take the old one off and install the new pieces. You guys have a customer for life. I will never buy trailer parts from anyone else. No one can touch you prices or customer service. Thank you etrailer.
The Yates end caps fit properly and the trailer jack is excellent quality. The trailer lighting kit comes complete and was a breeze to install. I will buy again because of the fast friendly service. The items were well packed. Robert B.
We placed our order on the 20th and received the endcap rollers on the 24th. Excellent service. Rollers fit perfectly. Installed them on the trailer the day they arrived. Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 1/2" Shaft - Great product. Description was very accurate.
Good product, Great Service !!!
Yates End Cap replaces lost end cap and protects boat hull. A very small order for etrailer but handled quickly, efficiently and pleasantly by Zachary.
Received our purchase within 4 days. Excellent prices and reasonable shipping charges. This was the 2nd time we ordered from etrailer, but will not be our last. We will recommend to all our boating friends.
just what I wanted, got here sooner than I expected
Good prices, fast shipping, overall great experience. Parts fit perfectly for easy installation. Will definitely use etrailer.com for my future trailer needs
these rollers are exactly what I needed to replace worn parts on a 30 year old pontoon trailer.........if you need it, etrailer probably has it, and customer service and shipping cannot be beat..........ronnei t.
This is what the Dr ordered. Pretty bas ic.
not much to say. they've been on the trailer, exposed to the sun and seem to be holding up well. will say the service from etrailer is excellent.
Exactly as described. Perfect replacement. The next best price I could find was 3x the price of etrailer.com. Needless to say, they've got a customer for life.
A perfect fit for the bumper guides on the trailer for my Stratos Bassboat
I used this as a replacement roller. It fit perfect and was of much better quality than the original. I would definitely recommend these to anyone looking for a top of the line roller.
Product is perfect and the service from etrailer was phenomenal. If only all online transactions could be like this.
Nice that the replacement roller is available rather than having to replace the entire boat guide arm unit.
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.