Bolster Brackets and Swivel Assemblies for SeaDoo Trailer

Updated 01/18/2016 | Published 01/17/2016

Products Featured in This Question

CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4

(610)

$64.56

CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 13" - Qty 1

(610)

$16.14

CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1

(318)

$4.73

CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1

(367)

$16.11

Question:

I have a seadoo trailer that needs 13 inch bolsters but I have 2X4 carpeted bunks, so I need swivels that will fit the bunks with 1 1/2 inch bolt spacing. Do you have swivels that will fit a 2X4 bunk??? Thank you very much.

asked by: Joe A

Expert Reply:

I can help you find the correct bolster and swivel brackets for your Seadoo trailer.

The CE Smith part # CE10002G is a galvanized 13 inch bolster with a swivel bracket assembly. The swivel bracket will fit your 2 x 4 bunk great, but the brackets included have a 2-1/2 inch center spacing. We do offer a swivel bracket with a 2 inch center spacing # CE10206AA, but with either I would recommend drilling a hole in the bracket where you need it.

It's important to keep in mind that its a good idea to not reuse the old holes when replacing the bunk to the bracket, instead it is recommended to use a new location to get a better hold.

If you needed u-bolts to complete your setup part # CE15283GA measures 3-13/16 inches long x 3-1/16 inches wide and has a 1/2 inch diameter.

expert reply by: Jackie C