# 1
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
# 2
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
Delivery was really fast but the box that it was delivered in was in two pieces and the seven pin bracket was bent and paint was chipped but everything else was up to what I expected
# 3
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
The 4 foot hitch performed great. I bought the extra lenght to get it further behind my truck camper, I have a 3 foot hang over. The only problem was this made my 20 foot welded flat boat catch a lot of wind knocking my fuel milage way down. It also does not let my steps fold down. I should have gone with the 3 foot extension. live and learn.
Wow. Who would have believed I could have my heavy 11.5' Camper (which was well stocked, I should add) and pull a cargo trailer loaded with shop tools, workbench, and hardware. Handled well on highways through mountain passes, etc. Assembly and installation should have been much easier but the poor quality of the photos with the instructions was a bit of an impediment.
# 4
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
At first I was skeptical but now that I’ve put it together I’m very impressed. This thing is heavy duty and pulls my trailer no problem. Korren did a great job helping me out. Excellent customer service.
# 5
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long
Structurally strong! Chain and turnbuckles created an extension for my RV extension bumper with storage box. Thought with chains it might need constant re-tightening but has remained tight, after initial trip of 5500mi. Of towing car dolly!
I’ve had the superhitch with 24” extension mounted on my 2013 Ram 2500 for 1 year now and use it frequently to pull my 16 x 7 enclosed trailer with my motorcycle and other gear inside. The hitch and extension give me the towing capacity I need for pulling trailers behind my Lance Truck Camper. I highly recommend the SuperHitch!
# 6
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
It does what its supposed to do. I have a 2024 F350 and the sleeve sticks out an inch or so past the end of the receiver because of how the holes line up. I don't think that affects the functionality but would be great if it was flush.
This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.
# 7
Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
I had to remove burrs from the inside of the tube, both at the holes drilled (for hitch pin) and the end where the ball hitch goes in. The welded boss on the end of the tube had burs left over from the cutoff operation. The ball hitch would only slide in a couple of inches prior to deburring it. Also the packaging was not very good, see pictures. No damage to the product but I am surprised it even stayed in the box during the trip here, it was completely loose in the box and tore it apart during transport.
everything fit perfectly and it works great
# 8
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
Works as it should and I didn't have to turn my power jack on my camper 90 degrees to miss the tailgate when it is lowered!!
# 9
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42" Long
We have been using Torklift superhitch and supertruss extension since 2010 hauling horses around the US. This extension and superhitch went on our new truck. We hauled trouble and worry free for 10,000 miles this year. Best product on the market.
I can now tow a trailer with up to 600lbs. tongue weight behind my Ford truck with an 11' camper attached. It does everything they say it will do.
# 10
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long
Worked perfectly for what I needed it to do!
Perfect fit
# 11
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.
# 12
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long
E-tailer folks are very knowledgeable and professional. The Torklift TLE 1648 is a beast. I can't wait to be able to tow my pontoon boat with the AF slide in camper. Thanks for giving me an option to tow my boats.
Very well built hitch. Easy to install as well. Highly recommend this hitch and etrailer.
# 13
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
Not surprising to me, the cardboard package containing the Cannon Extension was damaged. However, the extension is so solid there was no apparent damage to the product. I was disappointed that the package failed to include four of the (6) required 3/8 inch shackles. Your packaging department could use some work. Overall, I’m looking forward to completing the required parts list and using the product.
The hitch worked great. I pulled a 12ft Wells Cargo enclosed trailer with a motorcycle on board. The reason I purchased this hitch, I have a 101/2 ft Lance camper that extends pass the bumper. I used it on a F350. I did use a Equla-I-Zer sway control hitch because of the tongue weight of my trailer and I believe it made this extension hitch work better.
# 14
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 42" Long
Heavy duty! Excellent product but did not have the bracket for the tailight extension. Of course the box was destroyed in shipping.
Works as advertised use it with my F350, Arctic Fox 811 Camper and 14' Enclosed UTV Trailer. Peace of mind going down the Road!
# 15
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 60" Long
It works perfectly to pull my toy hauler behind my slide in camper
Super fast FREE shipping! Easy installation! Much cheaper purchasing through etrailer than any trailer supply shops near my home! I’m a local business supporter but the speed of shipping and price was to good to pass up!
# 16
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
The product works fantastic! Used it to tow our cargo trailer across the country a few times now having zero issues. e-Trailer did a great job installing and explaining the product and installation process in as much detail as we needed. Thank you!
The item is exactly what we needed. It arrived safely and on time. Your service is outstanding and you are my first "go to" when I need parts and accessories for our trailer. Thank you for all your hard work keeping this business going.
# 17
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 28" Long
Very intuitive to assemble and heavy duty. Don’t forget the trailer light extension like I did.
The last piece of the puzzle. Pretty stout construction. Easy to assemble. Just pulled a 7000 gvw trailer behind my af992 camper. Flawless. Dont forget to order the pigtail extension.
# 18
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
Very disappointed in the packaging. It was thrown in a box with nothing else. The box was ripped on both ends on the side where the hitch busted through. Scratched up around the main hitch part. Mostly from rubbing I guess and the side that were sticking out we’re scared. I did install it anyways but if this is how they ship there products I will not buy again.
Quality seems good, haven’t had the opportunity to tow yet but it fits the receiver perfectly
# 19
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long
I needed a way to pull my 24 ft car trailer with my truck camper on,after researching extensively I kept coming back to the Supertruss extension, I couldn't be happier first trip out was 1200 miles and everything performed exactly as advertised.
Very Heavy duty and works as promised. I use it to extend my hitch on my 2012 Ram 3500 when I have my Lance 855s camper on the truck. It allows me to tow my Jeep on the trailer behind me. I also have the TorkLift super hitch on the truck which allows me to tow the loaded trailer with peace of mind. The system of superhitch and supertruss work perfectly together and I highly recommend.
# 20
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.
Appropriately heavy for the job!
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"