# 1
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Have not mounted it yet but it’s what need to flatbtow a jeep behind my truck with a Lance camper
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
# 2
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
I purchased the hitch extension to accomendate our bike rack to go on the back of our truckcamper. I also purchased the bike rack and steps at all work perfectly together. The extension is very heavy duty and can be used for towing a boat. The only con was not the extension it was the packageing it beat itself up. I also added turnbuckles and safety chain and electrical extension.
# 3
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
High quality part! It was exactly what I needed. This is pretty easy to use with the only challenge being lining up the holes with the receiver and the hitch. Still pretty easy.
I really like the magnets. The design allows it to stay in the hitch even when nothing else in there. The lip keeps the sleeve from slipping into the receiver like most other hitch reducers. The product works as advertised and fits into the hitch nicely.
# 4
Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
Good service and quick shipping!
everything fit perfectly and it works great
# 5
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We used this to be able to take our golf cart in the bed of our truck while pulling our travel trailer. This extender allowed us to have the tailgate down for the golf cart. It worked perfect and even had a couple people come up to us wondering how we were able to bring our golf cart. Before this we had to take 2 vehicles or just not take the golf cart.
Works great!
# 6
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This is a good quality reducer.
# 7
Reducer Sleeve for Super Titan Hitch Receivers - 3" to 2"
This is a nice fit in the 3" receiver and the right amount of extension. I am finally able to fully open the tailgate while attached to my camper. I am a little concerned it might be too much extension for the safety chains and 7 pin electrical wiring harness. A through test drive is needed
I ordered this 3 inch to 2 inch hitch reducer because I had purchased a new RV and the receiver on the new RV is a 3 inch hitch. My previous RV hitch size was 2 inch. I needed a 2 inch receiver because I am re-using my Blue Ox tow bar which has a 2 inch hitch. Fit perfectly. See pictures.
# 8
Replacement 2-1/2" to 2" Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches
Looks good. Thank you!
I needed to replace my reciever reducer FAST and I ordered it for next day delivery and got it right on time.
# 9
Trailer Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
Hitch works great as I hoped it would work for this application. Shipping was timely
The extension works well with my Thule T2 pro XTR bike rack. I can now open my tailgate with the bikes on the rack without tilting the bike rack down. It is a bit lose in the receiver and will require a hitch receiver anti rattle clamp to make it tight.
# 10
Draw-Tite Reducer Sleeve with Collar - 3" to 2-1/2"
Easy to navigate the website, seemless ordering process, fast delivery and the Draw-Tite Reducer Sleeve with Collar is heavy duty, it is exactly what I needed to be able to fully open the tailgate on my truck. I have made multiple purchases through E-Trailers for my needs and it's always easy to find the parts and the fast deliveries, I will keep me going back to them on future purchases.
Daniel was very knowlegeable on the product i needed and expeditex my order because i was leaving in several days!!!!
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"