Video Transcript for Wheel Masters Hand-Hole-Mount Dual Tire Inflation Mounting Brackets Review

Speaker 1: Today we're going to be taking a look at Wheel Master's replacement mounting brackets for dual tire inflation extensions. Part Number: WM9037 dash 10.By holding the valve stem extension stead, it's gonna extend the life of it, because it's not gonna be flopping all around, scuffing up your wheel and damaging the end of the extension. It's also gonna make it easier to inflate, because it's got a solid point you can put your chuck onto and then your muff.While there are other options out there to keep your valve stem extension stable, this is the most universal option that'll work with just about any wheel.The other nice thing is that there's no drilling required. You just bend the bracket to your appropriate shape, clip it right in and you're good to go.The polished metal finish, is gonna blend in nicely with most hubcaps and wheels, so you won't even detract from the looks of your RV.These brackets come in a pack of 10 and will work just about every wheel application that has a hole for your stem to poke through. We'll install those now, you begin by taking your extension, unscrew the cap, and unscrew the nut, verify that it fits on there properly, and you see that it does. So now we'll need to bend it to the appropriate shape for our wheel.For this wheel we're gonna go ahead and bend it real close to where the mounting hole is there.

And slip one end behind the wheel, slide your valve extension through, and then you'll clip the other end onto the other side. This will now hold that in place, and then you can thread your nut back on. If it came with a star washer, make sure you put that on as well. And you can use an adjustable wrench to tighten that down. Now you can just thread your cap back on, and you'll repeat the same process on your other valve extension.And that completes our look at Wheel Master's replacement mounting brackets for dual wheel tire inflation extensions..