Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rubber hoses take the hassle out of inflating and checking the air pressure of inner tires on dual wheels. Kit is designed for steel rear wheels without wheel liners or covers. Hardware included.
Features:
Specs:
Checking and maintaining proper tire pressure is important for ensuring a safe, smooth ride and maximizing fuel economy, but it can be a real pain with dually tires. The Wheel Masters inflation kit takes the hassle out of checking air pressure and inflating the inner tires on your dual wheels.
Two hoses extend the valve stem location of the inner tires to the outer wheels. This means no more crawling around on the ground or blindly reaching for the valve stem on the inner tire.
Hand-Hole-Mount Installation
The dually inflation kit is designed for steel rear wheels without wheel covers or wheel liners.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Works out alright a little tight but it’s fine ,,thank again
Works good. No concerns or issues. Easy to install.
GREAT PARTS GREAT SERVICE FAST SHIPPING
nice valve extenders, quality built. the reason for the low rating is because it didn't include the Retaining nuts.
I’ve had the hardest time finding an extension like this to fit my 17.5 trailer wheels. Thankfully I came across these because they worked perfectly. Such a relief that checking air and airing up won’t take 20-30 minutes anymore
These extenders are only mountable into oval cutouts of a certain size. They will kink if used otherwise.
I have had problems using these on both sides for my dual rear wheels. adding air takes over 5 minutes to increase pressure a couple pounds. not very good flow. Next time i have the rear wheels off, I will have to look at them and see about a replacement.
Wheel Masters 2- Hose Inflation Kit was easy to install and has been working great. It provides easy access to check pressure and air up my tires.
Mostly unusable due to rim depth. Needs to be a custom type length
I bought these to use on my 2024 Ram 3500 Dually real wheels.Great quality of the steel braided hose, but the hand hold mounts won't fit on the outside aluminum tire rim. The diameter of the size of the rim it too thick for the hand hold mount to stay on. Also, the hand hold hole for the inner steel tire rimn is larger than the hand hold holds on the aluminum rims. They might fit on the inner dual wheels. I didn't want to mount the tire stem holder on the plastic tire cap.
Friendly Fast Service
I used these on my 2017 Ram 3500 for the inside rear wheels. They work great.
I have always found the etrailer web site helpful and my most recent order is exactly what I wanted and as represented by the company.
Order was delayed since not in stock but I eventually got what I needed as described. Would have been good to know they were on back order or not available for immediate shipping. That way if I needed them ASAP I could have looked elsewhere.
I ordered the parts and they were delivered
Thank you.
These valve extensions were very easy to screw on. No tools necessary.
The service from etrailer is always fast. They shipped out the same day the order was placed.
Work very well on rear inside dually tires. Mount to outside rim to allow easy access to inside tire for pressure test or tire monitor.
Installed on valve stem with minimal air loss. Afterwards was easily able to inflate the inner dual tire and check the pressure.
Product seemed of good quality. Although I was unable to use them as the hoses where to long for my application. The mounting tabs fit well.
This valve stem extension setup was on my motor home duals when I bought the coach and worked well, but only on one tire per side. I wanted the same setup on all four rear tires but had trouble finding them. Someone on a RV forum said to try etrailer and their they were! They are simple and light enough not to affect tire balance and work like a charm. This is one year later and no regrets.
David
6/12/2019
Still working fine, they did expose a weakness in my valve stems. One tire was low and it turned out to be the valve stem didnt like to be pulled at an angle. The fix was upgrading my valve stems.
It didn't fit my application so I retunrned it.
These don't fit our 2010 F-350. The bends at the ends of the straps assume your rims are stamped or pressed, and have an edge on their insides. Ours don't: our rims are pretty solid and the holes have 90-ish degree angles inside and out. I had to use pliers to flatten the strap ends so they'd go in the holes in the rim. Nothing secures them once there. So I reached around the back of the outside tires to try to bend the straps' ends to fit, but that's not a sure thing. Any vehicle that has similar rims will have the same fitment problem.
We take our truck camper off road on occasion. The locknut *should* keep the straps in place. However, "should" isn't the best feeling when RVing.
Victoria B.
8/9/2019
I reached out to Wheel Masters about your installation. They noted that this kit is designed for steel wheels without any wheel covers, liners, or hubcaps. For a wheel like yours, the # WM8002 kit is a better solution.
Helpful Links
Do you have a question about this Tire Inflator?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rtp
4/28/2018
Makes inflating Before leaving for AZ in Jan. Again had, no problems inflating the tires and checking prior to heading home.