Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there neighbors. Today we're going to be taking a look at Optronic's three wire pigtail to straight plug for Optronics trailer lights. Here you can see one end of our adapter, which allows us to go from our standard three wire pigtail over to our straight three wire pigtail for our Optronics lights. It's a nice easy installation because you just plug it into your factory trailer wiring. And then it adapts it for our other end here on our light.Our straight end has an upgraded connector over your traditional three wire pigtail. The big upgrade here is the weather pack that you see around it.
Your standard three wire pigtails don't have any type of weather packing. You can just use some dielectric grease to help protect it from the elements, but eventually corrosion is going to likely build up on this style of connector.With the weather packing, it keeps out any moisture from entering inside the connector. Optronic's lights typically come with grease packed in them already, so with the weather packing that's on our connector here, the likelihood of corrosion ever occurring on this light is reduced. It's going to adapt and provide all of your standard functions, so you'll have your ground wire, your taillight circuit, as well as your stop and turn circuit. Our harness adapter is going to measure 8-1/17 inches long, so it's going to extend it a little bit to make it easier to get your lights installed.You can see here our factory taillights barely come out of our connector, which can make it a little harder to get our light out if we need to get in here and clean it up or perform any service on the other wiring that's located behind it.
Now that we've used our harness to make a quick easy connection to our Optronics light, we can simply poke our wiring in, push our light into the grommet, and then any of our excess wiring here, we can use some zip ties to tie it up, keep it nice and neat.If you need some zip ties, you can pick some up here at etrailer.com. You can see here that it provides all of your necessary lighting for your taillight circuit. You've got your taillights, your brake lights, and your right and left turn signals. The harness comes as a quantity of one, so if you need one for the other side, you'll need to pick up two. And that completes our look at Optronics three wire trailer plug to straight plug for Optronics trailer lights..
The light and adapter works great. I made a custom brake light for my motorcycle.
Remember to get these with the tail lights if you are replacing old system lights. The plug make wiring much simpler and the connection water proof. The lights that these fit work very well and look great!
Coverted from the three round pins I had, to a rear tail light with three flat pins. Both ends were female. Nice easy fix. Thanks.
Steve C.
8/21/2017
The products I purchased from you a year ago work very well and expect they will for a long time. My lights on my trailer work perfect. Soon Im going to add more for visibility and I will get them from you. Thanks!
I was very happy to see they made this plug, versus having to do some homemade connections with my heat shrink tape and connectors, hoping for the best. This wiring harness pigtail not only is completely waterproof on the weather end, but is the high quality rubber & plastic you would expect to find on a brand new vehicle. Wouldn't hesitate to recommend this to anyone.
Install the new glow lights right when I received your package in the mail. It was easy to install all four lights in less than thirty minutes. They look great when on. Now I need to do my marker lights so they all match. Thanks.
Great product. These pigtails are great for the LED lights And brackets I put on my utility trailer.
Great lights and pigtails made installation super simple. Would definitely buy here again.
Product worked great on my new 2020 Peterbilt 567 tail lights.
Resists water, corrosion and uv damage like a charm on my Baja bug, made the process of swapping out lighting options during my projects build a breeze! Great product, survives the harshest wet and dry environments!
Made it easy to wire my LED lights. Very good and helpful product.
Was a perfect replacement for the old burned out lights on my Featherlite stock trailer!!!
Thanks for asking, I really appreciate the follow-up. The item I ordered is exactly what I needed and delivered in a very timely fashion and might I add very reasonable shipping.
I'm very happy with my purchase. It meets my expectations. Thanks. I'll be doing some more purchasing in the near future.
Juan I.
5/10/2018
Theyre working just fine. Im very happy with the products.
No ploblems at all with any of the products I’ve purchased here.
Works great, quick shipping and at a good price
Larry G.
7/31/2018
Works great
Richard
2/7/2024
STILL 100 NO PROBLEMS STILL WATER PROOF.
Great Product that worked well!
Great product great service
Must have when upgrading. Easy to conve rt
Plugs worked great. Good product good seller fast shipping
Great product if you need to change style of plug in without cutting and splicing the wires
Install was easy
Product was excellent as advertised and quick shipping.
As advertised
Worked as expected. High quality product.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
5/22/2022
Still pluggin away