See what our Experts say about this Lippert Accessories and Parts

• Replacing Ultra-Fab Landing Gear With Lippert Landing Gear With High-Powered Motor
  Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The issue is that the Ultra-Fab has an uncommon 20-1/4 inch space between the mounting brackets, while Lippert and most others have landing gear with the standard 17-1/2 inches. So if you were okay with having new brackets welded on to meet the spacing...
  view full answer...
  
• How to Run Wiring for Replacement Landing Gear Switch
  If you are using either the Lippert Components Landing Gear Switch # LC145236 or the Stromberg Carlson Landing Gear Switch # LG-145236 you will connect the red wire without the fuse along with the longer black wire to the red and black wires on your motor. The short black wire will be run to the battery's negative post and grounded and the pink or red wire with the fuse will be connected to the battery's positive post.
  view full answer...
  
• Replacement Landing Gear for a Keystone Laredo 5th Wheel Trailer
  Bulldog Tandem Landing Gear Set # BD500162 is a great option for a manual set to replace the landing gear on your Keystone Laredo. I have linked a video review for you. The handle is not included so use # BD500203 to add the crank handle. For an electric set you could use # RVLG-8HDL and add motor # LC142178 and, if you don't already have one, a switch # LC145236.
  view full answer...
• Landing Gear Moving In Opposite Directions When Switch Is Activated
  One of your motors is connected backwards and you'll need to simply swap the wires at the switch assembly # LC145236. Make sure to level your landing gear before you completely finish the assembly because the motors will work in sync with each other when you switch the wires around and you want your landing gear to move at the same rate. To level your trailer, simply unplug one motor and use the other to move up or down to match, then connect the wiring in the correct order to make both...
  view full answer...
  
• Replacement Landing Gear Switch and Power Cord for a 2015 Forest River XLR Nitro Camper
  Hey Tina, thanks for reaching out! It sounds like you're needing the Lippert Landing Gear Replacement Switch Kit # LC145236 along with a 50A Power Cord # A10-5025EDBK as that's what it looks like your camper is equipped with. We don't have any furniture covers, but you would be able to get what you need on the internet fairly easily. Is there anything else you're needing to fix up before camping season is in full swing?
  view full answer...
• Replacement Landing Gear Motor For A Lippert 141893 Motor
  Hey Trey, There are a couple other comparable motors to the 141893, but they all have a lower RPM rating so they wouldn't really be an upgrade. If your motor is worn out I would just replace it with the same one # LC141893 to ensure compatibility. Lippert offers a fused switch # LC145236 specifically for their landing gear motors. The fused red wire would run to your trailer battery and the black wire with it will connect to chassis ground. The other red and black wires would run to...
  view full answer...
• Replacement Landing Gear Switch for Forest River XLR Boost 5th Wheel Trailer
  The correct replacement landing gear switch for your trailer is the Lippert Ignition Proof 5th Wheel RV Landing Gear Switch part # LC145236, you'll just simply cut the wires from the old switch and attach the new one with butt connectors like part # DW05745-5.
  view full answer...
  
• Can a Single Motor Venture Landing Gear Set be Converted to a Dual Motor System
  To make the single motor landing gear into a dual-powered landing gear you will need to replace the existing follower leg with a lead leg # LC119102, add a new gear box LC276602, motor # LC142178, and switch # LC145236. It would be easier and cost less to just replace the whole system with a dual motor system such as # UF17-943010 rated for 12,000 pounds.
  view full answer...
• How To Test A Landing Gear Switch Harness
  I contacted Lippert and their guidance for testing the Lippert Components Ignition Proof 5th Wheel RV Landing Gear Switch w/Harness # LC145236 is to use a voltmeter to verify power is getting to the motor. Test for power both before and after the switch. If you have power before the switch but not after, then the switch is bad. You will want to make sure the switch is on when testing. If you have power after the switch then the switch is good but if you don't have power before the...
  view full answer...
• Replacement Landing Gear Recommendation for a 2011 Keystone Raptor 3812 Toy Hauler
  While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle # RVLG-8HDL as this landing gear uses the standard weld mount locations of 15-1/2" inside and 17-1/2" outside measurements (see attached). You can confirm fitment by measuring where the weld stops are on your current landing gear. This set comes with a handle but if you don't already have an electric motor...
  view full answer...
  
• Troubleshooting Replacement Lippert Jack Operating in Opposite Direction
  Although you wired up the new Lippert jack the same was as the failed unit, the fact that the jack is operating in the opposite direction from what you are pushing on the switch does indicate that the wiring leads are somehow reversed. Swapping the positions of the wires to the motor on your system should resolve this issue so that the stabilizer jack starts working correctly again. Please just let me know if you have any further issues and I wll be happy to do some more troubleshooting.
  view full answer...
• Replacement Switch For Landing Gear On 2021 Forest River XLR Boost?
  Yes! I confirmed with Lippert that the Lippert Ignition Proof 5th Wheel RV Landing Gear w/Harness # LC145236 will work as a replacement switch on your 2021 XLR12 Boost Toy Hauler.
  view full answer...
• Replacement Switch for Lippert Components Power Landing Gear
  I do not know what landing gear you have on your 2013 Heartland Cyclone 5th wheel just from your RV information. But, more than likely you have a Lippert Components power landing gear set-up. That is because it is the most commonly used. If that is indeed what you have, then the Lippert Ignition Proof 5th Wheel RV Landing Gear Switch w/Harness # LC145236 is the correct replacement switch.
  view full answer...
• Will The Lippert Motor 142178 Work With the Landing Gear Set RVLG-8HDL
  Yes, the Lippert Motor for Electric Landing Gear part # LC142178 that you said you have will work with the Landing Gear Set part # RVLG-8HDL. The switch you have now can then be reused or we have the Lippert Components 5th Wheel RV Landing Gear Switch part # LC145236.
  view full answer...
• Replacement Landing Gear Recommendation for an Altitude Toy Hauler
  Thank you for reaching out! For a basic set of landing gear you can use the etrailer Landing Gear Set w/ Handle # RVLG-8HDL which is rated for 8,000 lbs, has a 36-1/2" lift, and has 15-1/2" spacing inside the weld stops. If the spacing between your weld stops matches this then our landing gear will match up perfectly! To add a motor to this kit you'll need part # LC142178 and then the switch # LC145236 gives you a way to operate the motor if your switch needs replacing. Attached are...
  view full answer...
  
• Landing Gear Legs Keep Blowing Fuse Even After New Motor
  If you still continue to blow a fuse on your lading gear legs even with a new motor then that would lead me to believe you have an issue with the wiring or switch. Therefore, I recommend you trace the wires from the motor to the switch and then from the switch to the battery. If I had to guess I would say you have a short in one of these wires but I don't think the relay would be your issue. The Lippert Components Ignition Proof 5th Wheel RV Landing Gear Switch w/Harness part # LC145236...
  view full answer...
• Diagnosing And Finding Parts For Landing Gear That Blows Fuse On 2009 Keystone Montana 5th Wheel
  Most Lippert landing gear systems just have one fuse so I don't think you will find another one in the system. The fact that you replaced the blown fuse and it still did not operate points to a few issues that could be going on. First, make sure the battery is properly charged and in good shape, then follow all the wires going from the battery to the switch, and from the switch to the battery making sure there are no pinched or bare wires. The best method for testing the circuit would be...
  view full answer...
• Recommended Replacement Landing Gear For 2004 Keystone Laredo 5th Wheel Camper
  I recommend going with an electric set for your 2004 Keystone Laredo 5th Wheel Camper. You could use # RVLG-8HDL, but I would add motor # LC142178 and a switch # LC145236.
  view full answer...
• How Many Terminals Are On the JR Products RV Landing Gear Switch
  The JR Products RV Landing Gear Switch part # 37213635 has four terminals; power, ground, motor in, and motor out. This will be the case for all of our landing gear switches. That said, most likely you have dual landing gear motors and just need to combine the motor in and motor out for each side before attaching to the switch. If you like, you could also just use two switches, one for each jack leg. The Lippert Components 5th Wheel RV Landing Gear Switch part # LC145236 comes with the...
  view full answer...
• Replacement Landing Gear Switch Recommendation Rockwood Travel Trailer with Lippert Landing Gear
  Since you said your lading gear is electric and not hydraulic you would actually want the part # LC145236 and not the part # LC138415 that you referenced since it is for hydraulic landing gear sets.
  view full answer...
• Determining The Correct Replacement Landing Gear For A 21" Weld Stop Measurement
  I looked through our current inventory and was unable to find a landing gear with a 21" measurement from the top of the top of weld stop to bottom of bottom weld stop so at this point you would have to remove your current weld stop brackets and weld on new ones to install new landing gears. The positive here is that it will open up your possible choices to give you what you want instead of just sticking with whatever is available in the specific size you currently have. You'll want to...
  view full answer...
• Troubleshooting Lipperty Hydraulic Leveling System Where Jack Won't Retract- Only Extends
  It's definitely possible that this has occurred during your re-build but it's more likely that whoever re-installed the unit got the plumbing for the hydraulic system mixed up. You'll want to make sure that the black hose is connected to the extend feed and the orange hose is connected to the retract feed-this is the opposite of what would be on a 5th wheel trailer with a similar hydraulic system, so that might be where the error lies. If both hoses are black then you would need to follow...
  view full answer...
• Replacement Landing Gear Needed for 2008 Fusion Toy Hauler
  I'd be happy to help you replace your landing gear! If you have a sticker to identify what you currently have I can see if we have a replacement for the one leg otherwise we'll need to get you a whole new set to make sure they operate at the same pace. If you have individual landing gear legs that operate at their own pace your toy hauler will always be unlevel. To replace your landing gear the only things we really need to know are the weight capacity of your current landing gear and...
  view full answer...
• Replacement Motor for Venture Fifth Wheel Landing Gear
  The replacement motor for Venture fifth wheel landing gear is Lippert Components Venture 5th Wheel RV Landing Gear Motor # LC142178. The switch you'd want is Lippert Components 5th Wheel RV Landing Gear Switch # LC145236; the gearbox is Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602. If you needed repair kits, we have those as well, the Lippert Components Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 and the Follow...
  view full answer...

Do you have a question about this Accessories and Part?