Product Experts Available Now!
Call 1-800-940-8924
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
(904 reviews)
Price: $245.21
In Stock
Lippert
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
Part Number: LC432690
In Stock
$245.21
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (904)
- Q & A (0)
- Photos
Lippert RV Steps - LC432690
Highlights
- Step in with confidence: Non-skid tread tape and drain channels help prevent slips in wet weather.
- Open with one hand: Manual pull-out design slides smoothly for quick setup and stows easily.
- Built to last: 8-gauge steel with black powder coat resists rust and daily wear.
- Fits common RV frames: 27-1/2" wide mounting bracket bolts or welds directly to the frame.
- Comfortable climb: Triple 25-1/2" wide steps with 9" rise suit 31"–34" entry heights.
- Holds steady: Rated for 300 lbs to support users and gear safely.
Features to know about
Solid Entry Every Time: Triple 25-1/2" Steps with 9" Rise
This triple pull-out step gives you a sturdy, balanced way to get in and out. Each tread is 25-1/2" wide and 8-1/4" deep with a 9" rise, so climbing feels steady and natural. The 300 lb weight capacity keeps the steps firm underfoot, and the built-in grab handle keeps your hand safely out of the way when you pull them out or stow them.
Safe Footing in All Weather: Non-Slip Tread with Built-In Water Channels
Each step has anti-skid tread tape and molded channels that direct rainwater away through small drain holes. Even in wet or muddy conditions, the surface stays grippy and clear—no puddles, no slick spots. It’s a simple design that makes a big difference when you step out in the rain or walk barefoot on a hot day.
Built Tough to Last: 8-Gauge Steel with Black Powder Coat
Made from 8-gauge steel and finished in a rust-resistant black powder coat, these steps hold up to years of use and road grime. They fold tight underneath and stay protected from the elements when you’re on the move. Many people replacing bent or worn factory steps noted how much sturdier this Lippert set feels once installed.
Smooth Pull-Out Action: Simple One-Hand Operation
The pull-out mechanism opens or folds back in smoothly using just one hand. It locks solidly in place when open and tucks neatly under the frame for travel. The folding action doesn’t bind or catch, making it easy for anyone to operate—no power assist or heavy lifting needed.
Reliable Replacement Fit: 27-1/2" Mounting Bracket with Bolt-On Design
The mounting bracket measures 27-1/2" wide x 16" tall x 12" deep, with holes spaced 26-3/8" side to side and 7" front to back. It bolts or welds to the frame like the original, giving you a secure fit that lines up cleanly. For many users, these steps went right on in minutes and worked better than the old OEM version.
Specs
Weight and Capacity
- Weight capacity: 300 lbs
Dimensions
- Entry height: 31" - 34"
- Step dimensions: 25-1/2" wide x 8-1/4" deep
- Mounting bracket dimensions: 27-1/2" wide x 16" tall x 12" deep
- Drop/Rise: 9"
Construction
- Material: Steel
- Finish: Black powder coat
- Steel thickness: 8 gauge
Warranty
- Warranty: 1-Year warranty
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
432690 Lippert Components (LCI) Triple Radius Entry Step
Similar to Hickory Springs 993240RFXWC2
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
904 reviews
by:
Shawn
05/31/2025
Etrailer was extremely helpful during ordering process. Product delivered on time. The factory RV Steps had been discontinued. The recommended Lippert product only required minor mounting modifications. Always satisfied with etrailer - Customer service is excellent.
by:
Bryant
08/10/2025
My steps was as expected. my box was beat up a dent on the bottom of the step frame powder coat coming off. But that’s the fault of ups not Lippert maybe some extra padding on corners would help easy install used a floor jack lifted up 4 bolts and done
by:
Karen
06/18/2026
Stairs are exact replacement for our 13 year old trailer's broken stairs. Very happy. Excellent customer service.
by:
Brandon
04/25/2026
I like them it makes it easier to get inside my trailer and dont have to put a stepping stool down to get into the trailer
by:
Marty S
06/30/2022
Perfect replacement steps for my OEM steps that got damaged beyond repair. High quality just like the original...mounting holes lined up perfectly. An absolutely outstanding purchase experience with etrailer.com. I was pleasantly surprised how fast I received them. Order placed on 6/26...shipped on 6/28...delivered on 6/30. The entire experience far exceeded my expectations.
Marty S.
7/2/2023
After one year, I am thoroughly pleased with this purchase. I should have added to my original review that using a motorcycle jack to lift these into mounting position made installation super easy!
by:
Jeff
02/15/2019
I stupidly backed my wife's car into the steps of our 5th wheel, damaging them. I looked on-line and found a replacement for the steps, perfectly described and with measurements and pictures so I knew they were the right ones. And at a great price, less than that big box Camping place - with free shipping. I ordered them and promptly got an email from George J. in customer service advising that the order had been received and shipped, giving me a tracking link and his own email address and a phone number to contact him with any questions. The steps arrived in perfect condition within 6 days at which time I received another email from Carol C. advising that the steps had been reported as delivered and to contact her with any questions, giving her email and phone number. Now this is great customer service!! And I have beautiful new entry steps too.
by:
Donald
02/06/2025
Fast shipping, thank you
Donald
2/7/2026
The steps are working great , just like new! Thanks you .
by:
Robert
09/21/2026
Not only was it the correct part but man I got here quick I really like that thank you guys for your fast service
by:
Steve D
04/09/2022
I received my order quickly but the box was damaged and some paint on the steps was damaged. I informed etrailer and they issued me a small credit to buy some paint. The steps fit my fifth wheel perfectly but they are definitely a lighter guage of metal tham my original steps. The installation was not difficult and the fit was excellent so I would recommend this company
by:
Paul
09/09/2026
Its' was a perfect fit and has been working great.
by:
Paul
02/25/2026
Easy to install, especially with a floor jack . Easy 4 bolts installment. I recommend buy the step stabilizer to go with it, names the bottom step stiff and solid. Also made by lippert for $[XX]
by:
Robert
08/15/2018
These steps operate much easier than the original ones that came with the trailer. They are well made - good quality steps!
It took me about 3.0 hours to install the steps. I did not order the outriggers so I used the old brackets off of my original steps. To remove the old bracket from my existing steps, I used a disk grinder to grind off the head of the pin. I drilled/enlarged the exiting holes (six total) in the new steps to 3/8 inch to match the size of the bolts that secured the existing steps. Attached are pictures of the brackets that I removed from my existing steps and the bracket complete installation.
It took me about 3.0 hours to install the steps. I did not order the outriggers so I used the old brackets off of my original steps. To remove the old bracket from my existing steps, I used a disk grinder to grind off the head of the pin. I drilled/enlarged the exiting holes (six total) in the new steps to 3/8 inch to match the size of the bolts that secured the existing steps. Attached are pictures of the brackets that I removed from my existing steps and the bracket complete installation.
by:
Susan
07/23/2018
We could not be more pleased with our steps! They are well built and the fold-up (and easy pull-down) feature is a must for our use. Great customer service, we were surprised at how quickly we received our order. We would gladly do business with these folks again!
Susan U.
7/23/2019
Our Lippert pull-out steps have been in use for one year and they are still going strong! We could not be more pleased with them!
by:
Joshua
12/31/2023
Amazing!!! Bought a 2018 Keystone 2 weeks ago and the only issue with super deal I got was the RV stairs. Old owner hit the deck with it on one of their camping trips… the stairs would barely come out, the outrigger bracket was bent as well, with a little cosmetic damage to the flashing fender. I watch some YouTube videos on how to measure, this site was the easiest to understand for ordering and best price. Got it super quick and installed it today. I installed by myself laying on the ground and pushing the stairs up. Love the new steps!!!
by:
James
03/26/2024
Replaced the rv steps on our fifth wheel and it took about an hour to accomplish. The replacement steps fit perfectly with no modifications needed which was a relief. Since they were kind of heavy I first put blocks under both sides of the new steps to get them off the ground then slid a jack underneath to lift them into position to install the bolts. Happy with the replacement steps.
James
3/27/2025
I have had the replacemrnt Lippert steps for a year or so and and they work perfectly and still look like new. Happy with them.
Bryce D.
3/27/2025
@James Glad to hear! What kind of trailer do you have?
by:
Neil
08/03/2026
Fit just right and quality was good!
by:
Dennis
08/05/2026
Very nice product. Bolted right into place no problem. Looks good.
by:
Bob T
10/23/2017
Great products, great pricing and fast shipping. Thanks etrailer.com
by:
Mike
08/28/2018
You guys a amazing, bought it Saturday, received it Tuesday, that’s what I like! and it’s factory fit! After I did the screw up, and bent the steps I didn’t think I could get some steps in Time for my next trip, Thanks!
Mike
8/28/2019
The steps are great, I think they’ll last many years!
by:
Daniel Mielke
09/15/2021
Right item, Good shape, easy installation and was delivered much sooner than expected. Good Job
by:
Chip
05/06/2025
The steps are solid and fold nicely. However, they skimped on the foot treads and only added the nonskid on two of the three raised ribs of the steps. They are almost to the point of being dangerous when wet. My guess is that when it was designed, it had all three, and corners were cut.
It would be five stars if it had all ribs with nonskid stickers.
It would be five stars if it had all ribs with nonskid stickers.
by:
Rex
11/18/2025
It was an easy install and was a direct replacement on my 2007 Forest River Sandstorm.
by:
William
10/13/2025
They were an exact fit for my 2012 Keystone Raptor. I was able to install the stairs by myself.
by:
Nathan
05/20/2026
Exactly as described and a quality product
by:
Scott
04/04/2026
Exact replacement for our 2014 Forest River Toy Hauler.
Had my 9 and 12 yr-olds help do the swap with a floor jack.. 4-bolts, 20 minutes, perfect fit.
Had my 9 and 12 yr-olds help do the swap with a floor jack.. 4-bolts, 20 minutes, perfect fit.
25
904
true
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Mounting Measurements for Lippert Manual Pull-Out Step LC432690For Lippert Manual Pull-Out Step # LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other measurements.
view full answer...
- RV Roof Vent Lid Replacement for Atwood Fridge and Step Set for 2013 Keystone Passport 2650Hey Ken, we have verified in the pas that the Camco RV fridge vent cover part # CAM42163 works with the Atwood fridges like what you have and is black in color. The Lippert steps part # LC432690 that you referenced would also work great as a replacement step setup as well. This matches the dimensions you need and would work great.
view full answer... - Replacement Pull Out 3-Step Recommendation for 2017 Grand Design 303RLSI pulled up pictures of your Grand Design 303RLS and it looks to have a pull out style 3-step on it so for a replacement that will be as cost-effective as possible the part # LC432690 would be what you'd want. This can either bolt or weld to the frame of your trailer. If your outriggers are 25.5 inches apart you'd have to move them out 2 inches for these to bolt in their place.
view full answer... - Correct Pull Out Steps For 25.5" Mounting Bracket Width I spoke with the manufacturer to ensure the measurements were correct and found that the chart on the page for # LC432690 is incorrect. It does require 27-1/2" of space for the mounting brackets. Both the # LC432690 and # LC432696 will be too big to fit your campers dimensions. TorkLift offers some options with a 25-1/2" mounting width: For a 18-1/2" - 28" entry height you'll want the TorkLift Glow Step # TLA8102. For a 25-1/2" - 36" entry height you'll want the TorkLift Gow Step # TLA8103. For...
view full answer... - Replacing Auto Steps With Manual Steps on Forest River RVThe steps you need are going to depend on some measurements you'll need to take; as for the installation, each of these can be either bolted on or you can have a professional weld them on. The right step for you is going to depend on the amount of length you have from your doorway to the ground, as well as your current mounting base dimensions, which need to match up in order to get a secure fit. The Lippert Manual Pull-Out 2 step # LC432682 has mounting base dimensions of 25-1/4" wide...
view full answer... - Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - Replacement Lippert Triple Pull Out/Manual RV StepsIt is likely that the steps you have are the exact same as the ones with the other part number that you found. What counts is the measurements specifically the side to side and front to back mounting hole spacing. For step set # LC432690 the holes are 26-3/8 inches on center side to side and 7 inches front to back.
view full answer...
- Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- Can Electric Motorhome Step Be Replaced By 3-Step Manual StepYou absolutely can replace powered RV steps with manual steps to save yourself the headaches of wiring issues, bad motors and also to reduce the number of devices that put demands on your motorhome's power system. Our range of 3-step manual pull-out steps is shown on the linked page. Motorhomes typically use a 24-inch size step but we do also have a 25-inch model # LC432690. What you'll want to do is measure the size of the mounting bracket on your original part. For a great value I really...
view full answer... - Replacement Manual 3-Step Assembly for 2011 KZ Sportsmen 290 Travel TrailerWe carry a wide range of replacement RV and trailer step assemblies and these are offered in several sizes and step counts. Based on my research the 2011 KZ Sportsmen 290 travel trailer comes fitted with a 3-step manual unit, one like # LC432690 from Lippert. You can view all of our RV 3-step options on the linked page. The dimensions you provided are useful but the key is to match up the mounting hole spacing. The step unit I referenced has mounting base dimensions of 27-1/2 wide x 9-1/2...
view full answer...
- Are Replacement Steps Available for a Jayco Eagle Fifth Wheel?We have an abundance of steps for you to choose from whether you prefer to replace the current steps on your Jayco Eagle or use free-standing steps such as the Econo Porch Trailer Step, # EHS-102-R-HR. However, RV steps are not specific to the make, model and year of the rig, so in order to find the correct replacements you will need to measure the mounting bolt hole dimensions. I have added a photo as an example, which shows the Lippert # LC432690, which has bolt holes which are 26-3/8"...
view full answer...
- How to Select Replacement RV Pull Out Entrance Steps for Forest River SalemTrailer and other RV makers do not maintain specs on smaller items like the steps they install on their RVs but it is not difficult to find replacements based on size. The linked page displays RV and camper steps that are offered in many types. For instance if you wanted a 2-step manual pull-out type you will simply click on those two features to then see all such steps. The just match your step width. For instance, Lippert 2-step manual pull-out step # LC432682 has a mounting base that...
view full answer... - Pull Out Step Recommendation for Horse Trailer That Has 26 inch Tall HeightThe best option would be a fold out step setup for your horse trailer where you need a height of 26 inches. The Lippert manual pull out step part # LC432690 would be a fantastic option. When it's out you have 25 inches from the mounting bracket to the bottom step. To mount these you'll also want the outriggers part # LC301704.
view full answer...
- Recommended Replacement RV Steps That are 24 Inches WideThe closest pull-out steps we currently have available to match the steps you are replacing in your RV is the Lippert Manual Pull-Out Step for RVs # LC432690. This 3 Step product measures 24 inches wide with a 9 inch drop and the overall width of its mounting base is 27-1/2 inches. The primary mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. I have attached an image that shows these dimensions more clearly. These are very nice...
view full answer...
- 4-Step Manual RV Step Upgrade for 2015 Forest River Blue Ridge 5th WheelThe OEM step supplied on a 2015 Forest River Blue Ridge 5th wheel is the type that does not contact the ground. To replace your 3-step like this with a 4-step unit I suggest the Flexco Manual Pull-Out Steps for RVs # SMFP-4400. These are designed to bolt on in place of the OEM steps on most RVs. Note this unit has slightly larger bracket dimensions of 28-1/8" wide x 18-1/2" tall x 12" deep. Depending on the brand and model of step unit that was originally installed you may need to use Outriggers...
view full answer... - Is There a 3 Step RV Pull Out Step that Can Replace LC432682There are 3 step pull out kits similar to the # LC432682 that you referenced but they are wider across the board so the exact mounting hardware you are using now won't work. The part # LC432690 would be a great solution for what you have but it's 27-1/2 inches wide and what you have now is 2 inches narrower. For new brackets you'd also want the part # LC301704.
view full answer... - Will Lippert Manual Pull Out steps part # LC432690 Attach to OutRiggers with Vertical MountsThe Lippert Manual Pull Out steps part # LC432690 that you referenced is designed to fit the outriggers you have on your trailer. Most RV steps attach to the mounting brackets on the sides like this so what you have is pretty normal. As long as your outriggers are 27-1/2 inches between them then this will fit and work well.
view full answer... - Which Lippert Manual Pull-Out Step Is Correct for a 32 Inch Entry HeightThe Lippert Manual Pull-Out Step for RVs part # LC432690 which is a triple step option would be best for an entry height of 32". The distance from the top of the mounting bracket to the bottom of the step is 25" therefore you will only have 7" from the ground to the first step which is perfect. Please note, you do need to verify the mounting bracket width is 27-1/2" which is pretty standard.
view full answer... - RV 3-Step Entry Steps Needed for a 2018 Forest River Sandstorm ToyhaulerI do have a solution for you to add a 3-step system to your 2018 Forest River Sandstorm Toyhauler but you will need to install Outriggers # LC301704 to go with more steps as the 3-step options are slightly wider. If you decide to go this route then I recommend going with the Lippert Manual Pull-Out Step # LC432690. This kit has a 300 lb weight capacity and has mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. We also have portable steps like the Aluminum # SASXL-08C-Y...
view full answer... - How to Determine if Lippert Triple Pull-Out Steps Fit TrailerThe Lippert Manual Pull-Out Step for RVs - Triple # LC432690 might work for your Keystone trailer, but we do not have a database of each part put on each year, make and model of trailer. To find out if these steps will work, you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting bracket to fit. These steps have mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. Otherwise, you will need to use the Outriggers for...
view full answer... - How Much Does the Lippert Manual Pull-Out Step for RVs # LC432690 WeighThe shipping weight of the Lippert Manual Pull-Out Step for RVs # LC432690 that you referenced is 60 lbs. If we knock off a few pounds for the packaging that will leave you with about 57 lbs.
view full answer... - Will Manual Pull-Out Steps # LC432690 Fit 2008 Jayco Jay Flight 30 BHSYes, the Manual Pull-Out Steps # LC432690 that you referenced will fit your 2008 Jayco JayFlight 30 BHS. The great thing about RV steps is that they can basically fit any RV since the install brackets can be moved, the steps can be welded directly to the RV, or you can install new brackets with the Outriggers # LC301704.
view full answer... - RV Steps for a 2016 Forest River Vengeance for a Width of 27-1/2"The steps that I recommend are the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames # LC791572. These manually operated RV steps make it easy to get into and out of your 5th wheel, they simply fold down for use and fold back up for travel. The leg extensions create a sturdy connection with the ground to eliminate bounce to reduce the potential for slipping or falling during use. They remain stable on uneven terrain since the legs adjust individually to keep the steps parallel. These...
view full answer... - Availability of Triple Step to Fit In Place of Lippert 2-Step # LC432682The current steps you have are the part # LC432682 which are 24-1/4 inch wide overall. For a similar size setup that has the third step you'd want the part # SMFP-3200L.
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Updated by:
Leah B
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Chelsea B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
6/4/2025
The new steps look great on your camper, Shawn! Looks like you spoke to Aaron, he will be thrilled to hear how everything worked out :)