To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Heavy-duty hitch comes in 2 lightweight pieces for fast, easy installation and removal. Sturdy wraparound jaw has a locking bar for extra security. Pivoting head eases hookup and helps limit chucking. Polyurethane bumpers ensure a smooth ride.
Features:
Specs:
Note: This fifth-wheel hitch is compatible with rotating pin boxes, such as the Reese Sidewinder, Reese Revolution, and 5th Airborne Sidewinder, only when used with a wedge (sold separately).
The single-piece, strong wraparound jaw completely surrounds your trailer's king pin for 360 degrees of contact. This wraparound jaw provides a more secure connection than standard 2-piece jaws that close in on the king pin from the sides. The increased jaw-to-king-pin contact on the Recon hitch offers tighter tolerances around the king pin, which minimizes both rattle and chucking, for a smooth, quiet ride.
A 3/4" thick solid steel locking bar spans the area in front of the jaw. This bar provides an added barrier of protection against accidental disconnection so you can have peace of mind that your trailer is secure. The locking bar is attached to the jaw and to the spring-loaded handle. The bar automatically locks when the jaw closes around your king pin.
The double pivoting, cushioned head improves your towing experience dramatically by helping to reduce jarring and unwanted noise. Built-in pins allow the hitch head to pivot back and forth and side to side. And hookup is easy because the hitch head will automatically pivot to the proper angle when it comes into contact with your pin box.
Polyurethane dampeners help to cushion the movement from the pivoting head and to reduce towing noise. These dampeners are built into the head assembly to cushion the head's side-to-side pivoting.
The Recon hitch is designed to mount to the included industry-standard base rails, which install in your truck bed and are anchored to the included custom brackets that attach to your vehicle's frame.
Assembling the hitch is quick and easy because of its lightweight, 2-piece design. First, attach the base to the base rails. Then simply slide the head assembly into the opening in the base. There are 3 different height settings to choose from - just slide the head up or down to find your desired height.
Once you have chosen your desired height, use the included pin to secure the head to the base. Finally, tighten the bolt to eliminate any movement and rattle.
Alternate Instructions
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement base assembly for the Demco Recon Fifth Wheel Trailer Hitch. It has a 21,000 pound weight capacity. For this video I've placed the base onto a set of rails just to show you what it would look like when it's installed on the rails. This does replace the base assembly that's on your Demco Recon Fifth Wheel Trailer Hitch. We sell that separately. It's Part Number DM 855043 and it is designed to be used with the Demco Recon Replacement Head, which is the DM 6169, that would attach to the yoke right up here. That does offer three height setting, hitch height settings, to fit your application.
It uses this adjustable yoke here that drops into the base. If you notice this pin . Let me turn it a little bit more, this large handle, if you pull the clip over here and pull this pin out this yoke will have three rows of holes that you can set it at whichever hitch height is required for your application to get as level of towing as possible. It will offer a hitch height setting of 15-1/2 inches, 17-1/4 inches, and 18 inches. The hitch height is always measured from the truck bed to the top of the hitch head, so when your hitch head is on this if you measure from the top of the hitch head to the truck bed, that's the settings you could get. This is a sturdy steel construction. It has a nice rust-resistant black powder coat finish on it.
It does come with the pins and clips you can see right here that is used to secure this base to your rails. This part is made in the USA. Again, the gross towing weight capacity is 21,000 pounds and the vertical load limit or pin weight capacity is 5,250 pounds. That should do it for the replacement base assembly for the Demco Recon Fifth Wheel Trailer Hitch with a 21,000 pound weight capacity.
Great product
As described
Jesica was the best I needed it asap said Friday it arrived on Thursday very satisfied
well built and good design! I like it alot and think you will too!
Fit perfect in my 2020 f350 tremor
Love it. It works well
This hitch met all my expectations and beyond. I have traveled over 10 thousand miles so far and it has worked very smoothly. Thanks JoAnn
Easy to read and install. Just received it although it covers my safety chain brackets, should be a easy fit!
Hitch works great and delivery from etrailer was fast.
Ultra Fast shipping and delivery Josh in costumer service awesome for getting dimensions quickly from Demco not listed easy install just waiting on RV to arrive to go pick it up.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.