View Cart

Mitsubishi Eclipse Roof Rack

Select Vehicle Year

  
Roof Rack

Available Years for Mitsubishi Eclipse Roof Rack


Roof Racks

Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima, Rhino Rack, Rola and Malone roof racks are built to the highest quality specifications to accommodate all your cargo needs.

Thule, Yakima and Rhino Rack offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.

Cargo baskets from Rola, Rhino Rack, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.

If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.




Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima, Rhino Rack, Rola, Inno and Whispbar that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers



Search For Custom Fit Mitsubishi Eclipse Accessories
Select A Category Below



Mitsubishi Eclipse Roof Rack Videos

Yakima Q Tower Roof Rack Stretch Kit Installation - 2012 Mitsubishi Eclipse

Today on this 2012 Mitsubishi Eclipse were going to be testing a Yakima Roof Rack System with the Q Stretch Kit. The Q Stretch Kit is going to allow us an additional 4 of crossbar spread when compared to the roof rack kit alone. We already have our cross bar assemblies put together, and now we are ready to mount them on the vehicle. The first thing we need to do is open the doors on both sides of the vehicle. Well set our front crossbar assembly up on our roof; we need to measure 4 back from the edge of the windshield weather strip to the leading edge of the Q Tower. We can adjust the thumb screws for proper tension.



Yakima Q Tower Roof Rack Installation - 2012 Mitsubishi Eclipse

Today on this 2011 Mitsubishi Eclipse well be test fitting a Yakima Roof Rack System. We already have our crossbar assemblies put together, and now were ready to mount them up onto the vehicle. First then we need to do is open the doors on both sides. With the doors open we can lay our front crossbar assembly on top of the vehicle. We need to measure four inches from the edge of the windshield seal to the leading edge of our Q Towers. Once we have our position set we want to make sure that our clips are sitting properly in between the seal and the doorframe, and then well tighten both sides down.





Mitsubishi Eclipse Roof Bike Racks Videos

Yakima FrontLoader Roof Bike Rack Review - 2012 Mitsubishi Eclipse

Today on the 2012 Mitsubishi Eclipse were going to do a test fit of part #: y02103 from Yakima, the front loader wheel mount bike carrier. Now our car has been already equipped with the Yakima roof rack, so all we got to do is put a bike rack on top of that. well take the front half of the bike rack and put it onto the front crossbar, then well go ahead and clamp it down, but leaving it loose so we can go ahead and move the back clamp into place as well. Once we have it loosely installed well go ahead and move it around to its final position and make sure its straight with the car, and then we can go ahead and tighten down the clamps. With those two clamps our bike rack is already installed. So at this point we can go ahead and load up a bike.



RockyMounts TieRod Roof Bike Rack Review - 2012 Mitsubishi Eclipse

Today on this 2012 Mitsubishi Eclipse, we're going to be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. First, we'll lift the carrier up on top of our roof rack. We'll center the head of the carrier on top of our front crossbar. We'll pull the straps around and secure them back to the head. Once we've done that, we can use an Allen wrench to tighten the bolt on the front of the head to tighten the front straps. Then we'll snap the front cover back into place.





Mitsubishi Eclipse Roof Rack Questions and Answers