Dodge Grand Caravan Brake Controller

Select Vehicle Year

  
Brake Controller

Available Years for Dodge Grand Caravan Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.





Brake Controller Manufacturers


Search For Custom Fit Dodge Grand Caravan Accessories
Select A Category Below



Dodge Grand Caravan Brake Controller Videos

Trailer Brake Controller Installation - 2016 Dodge Grand Caravan

Speaker 1: Today on our 2016 Dodge Grand Caravan, we're going to be taking a look at and showing you how to install the Draw-Tite activator IV trailer brake controller for one to four axles, part number 5504. Now we're also going to be using in conjunction, pigtail wiring harness for the Draw-Tite brake controller and that's going be part number 7894. We're also going to be using the no drill long bracket, which is going to be part number 18136. Also, to help us get the wiring installed, we're going to be using the universal installation kit for trailer brake controllers, part number ETBC7.Here's what our brake controller looks like fully installed. Now this is a time delay brake controller, so we do have the option to mount it pretty much any which way we want. It does have the manual override button right here, which is going to be a lever style.



Trailer Brake Controller Installation - 2017 Dodge Grand Caravan

Today on our 2017 Dodge Grand Caravan we'll be installing a Tekonsha PowerTrac Electronic Brake Controller, part number 39523. To ease our installation we'll be installing our brake controller with our 7-Way Adapter Kit, part number ETBC7. Here's what our brake controller looks like installed. As you can see, it's a nice, slimline design, very simple to operate, and easy to use. This will easily allow us to control trailer brakes on trailers that have up to two axles, making our Caravan a more suitable tow vehicle. This LED, when we don't a trailer connected, there is nothing displayed there. It's just off.



Trailer Brake Controller Installation - 2014 Dodge Grand Caravan

Today on our 2014 Dodge Grand Caravan, we're going to show you the Tekonsha Primus IQ Trailer Brake Controller, part number TK90160. This is what the brake controller looks like once it's installed on our Caravan here. First off, we'll cover what you can see. We've got our bracket here, and of course, our brake controller. It's a nice sleek unit, pretty thin. The bracket it comes with makes the brake controller easily removable so you can trade it between different vehicles. If you ever need to activate trailer brakes by themselves, you can move to manual override. You can see how the numbers scroll up to showing the power.



Trailer Brake Controller Installation - 2014 Dodge Grand Caravan

Today on our 2014 Dodge Grand Caravan. We're going to be installing the Tekonsha Prodigy P2 Trailer Brake Controller. Part number 90885. We're also going to be installing the universal installation kit for trailer brake controllers, part number ETBC7. Now here we have our brake controller, we have everything hooked up and you slide the manual override, the lever on the bottom we have an NC for showing that there's not a trailer connected. Now I'll go ahead and plug the trailer into the back. Now that we have a trailer plugged into the back, you can see that we have a C showing that it is connected.



Trailer Brake Controller Installation - 2009 Dodge Grand Caravan

Today on our 2009 Dodge Caravan, we'll be installing the Tekonsha Prodigy P2 brake controller, part number 90885. Note, this vehicle has already had an ETBC7 brake controller installation kit installed, so we'll be connecting to it and mounting our brake controller. So to begin our install, we'll take the pocket from our brake controller and install the pocket onto the dash. We'll be installing it on the kick panel to the passenger side of the steering wheel. We'll use the hardware provided with our install kit to secure it. Next, we'll take the wiring harness from the brake controller and secure it to the vehicle.



Trailer Brake Controller Installation - 2008 Dodge Grand Caravan Part 2

To get to the engine compartment, we are going to drill out a hole right here, between this grommet and this smaller grommet up here. We are going to start off with a 1/4 inch and work our way up so we can install our bushing, which will end up right in there. Be careful of the wires right next door. Once you have your holes drilled out, you can go ahead and insert your bushing of your choice. And at this point you can take the extra wire that you had and wire going to the brake controller going out to the connector you can run those through right now. We are going to run outside our blue wire going out to our trailer, our white wire is going to go to ground, and our black wire will eventually go to our power. To give yourself a good idea about how much wire to leave left over behind so you have enough to reach the brake controller when you install it and it is always a good idea to have a little bit extra on the inside. So we will push a little back in there towards the outside. 1:05



Trailer Brake Controller Installation - 2008 Dodge Grand Caravan Part 1

Today, we are going to install part number 90185, the Prodigy brake controller from Tekonsha and we are going to install this on an 08 Dodge Grand Caravan. Also, on this install, we are going to be using part number ETBC-7 and also part number 118140 bracket kit. First, we are going to install the 18140 at the rear of the vehicle on the hitch. There is a hose clamp that holds it in place, basically. Kind of hold everything in place and just tighten it down. Now, we will install the bracket for the ETBC-7 kit and we will just put it on like so. Next, we will install the connector and it just goes into place like so. Put a couple of screws to hold it into place. Alright, at this point we will connect up to the preexisting 4-pole we already have. Next, we will put the existing 4-pole to the connector and before we do that we will put some dialectic grease in there keep it from corroding up over time. And we will put a zip tie around it make sure that it never comes apart. What we are going to do next is run our ground wire that will be the white with the ring terminal and then the purple wire is reverse light lead. In this instance we will not be hooking it up, that is because the trailer does not have any back up lights on it and also since this has to have a modulite for the wiring harness the reverse lights are not powered by the modulite, so it probably would not be a good idea to hook them up anyway. And then we will ground our ring terminal at the body panel near the pinch weld. Now, we will just go ahead and secure our wires to our other wires underneath the bumper. Next, what we need to do is go ahead and hook up our leads that go to the front of the vehicle. The blue will be going to the brake controller and the black will be going to the 12 volts basically straight to the battery going through a circuit breaker. We will just strip the ends off of the wire and we are going to go black to black for our 12 volt power supply and we are going to hook our white wire it is going to go to our blue wire. Just remember that the white wire is going to be going eventually back to the blue wire on the brake controller. We will go ahead and secure the wires with some tape, bind them up. Once you have them taped up secure, you can go ahead and install the loom assembly around it. It kind of slides onto the wire. You can also take the rest of your wires here and put it with it also. 2:33