Flat Tow Brake System Specs:
Accessory Parts:
Features:
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
The stop light switch kit listed is a requirement for proper usage of this braking system.
More Information >Flat Tow Brake System Specs:
Features:
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the car's brakes at an intensity preset by you. Easy to swap between multiple cars; settings adjust for smooth braking for any size car.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Features:
Get fully proportional braking with a system that never has to be removed, replaced, or reset. Actuator installs out of sight and remains virtually invisible when your car isn't being towed. Controller also works as a trailer brake controller.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
More reliable than a standard portable system, lightweight actuator brakes your car perfectly in sync with your motorhome. Pressure reducer protects cars with active or continuous-power-assist brakes, such as hybrids, from damage.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
The stop light switch kit listed is a requirement for proper usage of this braking system.
The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.
More Information >Flat Tow Brake System Specs:
Accessory Parts:
Features:
Stay on budget with this proportional braking system. More reliable than a portable system, cheaper than a permanent one. Pressure reducer protects cars with active or continuous-power-assist brakes, such as hybrids, from damage.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
The stop light switch kit listed is a requirement for proper usage of this braking system.
The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.
More Information >Flat Tow Brake System Specs:
Features:
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.
More Information >Flat Tow Brake System Specs:
Features:
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.
Installation Notes:
The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.
More Information >
Filters
