Expert Review Video:
Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. With air bags, compressor, and wireless controller all in one kit, you can adjust pressure from the cab or right at the hitch. This kit helps keep your truck planted and your ride smooth whether your hauling heavy or running light.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
Replace your factory bump stops and experience improved stability, reduced sag, and better control while towing or hauling. Durable rubber bump stops absorb road shock, minimize bounce, and protect your suspension for a smoother ride on any terrain.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
For vehicles that have been lifted, spacer kit T93AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
For vehicles that have been lifted, spacer kit T93AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit trucks with Toyota Racing Development (TRD) Package
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
Spacer Kit T68MR is needed if your truck has been lifted and there is 6 - 7-3/4 inches between the frame and leaf springs when the truck is empty.
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
Spacer Kit T68MR is needed if your truck has been lifted and there is 6 - 7-3/4 inches between the frame and leaf springs when the truck is empty.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Load up your gear or hitch a trailer! This complete air suspension kit with on demand compressor and in-cab controller keeps your truck level, the ride smooth, and handling steady - all from your driver's seat.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Vehicle Suspension Specs:
Features:
Get the cushioning of SumoSprings for your coils. These wedge-shaped springs fit between the individual coils in each spring of your vehicle's front suspension for better load support and a more comfortable ride. Great for trucks with snowplows.
Installation Notes:
No drilling through vehicle frame required for installation.
Models with the Off-Road Package should use part number CSS-1069F
Tech Tip:
Product requires specific trimming to fit this vehicle; please call SuperSprings for instructions.
More Information >Vehicle Suspension Specs:
Features:
Get the cushioning of SumoSprings for your coils. These wedge-shaped springs fit between the individual coils in each spring of your vehicle's front suspension for better load support and a more comfortable ride. Great for trucks with snowplows.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product requires specific trimming to fit this vehicle; please call SuperSprings for instructions.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Does not fit vehicles with rear sway bar
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product includes U-Bolt Flip Kit to allow for more ground clearance.
More Information >Vehicle Suspension Specs:
Features:
Rough roads, heavy loads, and daily commutes put your suspension to the test. These twin-tube shocks absorb impacts, improve handling, and reduce body roll for a smooth, controlled ride. Precision tuning ensures comfort and stability on any terrain.
Tech Tip:
Product not intended for OE coil. Shock requires Old Man Emu Coil Springs for installation (sold separately).
More Information >Vehicle Suspension Specs:
Features:
Rough roads, heavy loads, and daily commutes put your suspension to the test. These twin-tube shocks absorb impacts, improve handling, and reduce body roll for a smooth, controlled ride. Precision tuning ensures comfort and stability on any terrain.
Tech Tip:
Product not intended for OE coil. Shock requires Old Man Emu Coil Springs for installation (sold separately).
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
Hook up a trailer, load the bed, or add a bumper and you'll see it - rear sag and a nose-high stance. These rear lift blocks bring the height and control back, keeping your truck level and stable under any setup.
Installation Notes:
No drilling through vehicle frame required for installation.
Do not install a Rear Block on top of a factory block. Trucks with a factory block will have less lift than the stated height because the factory block is removed during the installation.
This kit is not to be used with add-on air spring or load-leveling products that attach to the extended jounce bumper strike nose on the rear block.
Tech Tip:
Product does not fit models with 5-lug wheels.
More Information >Vehicle Suspension Specs:
Features:
Hook up a trailer, load the bed, or add a bumper and you'll see it - rear sag and a nose-high stance. These rear lift blocks bring the height and control back, keeping your truck level and stable under any setup.
Installation Notes:
No drilling through vehicle frame required for installation.
Do not install a Rear Block on top of a factory block. Trucks with a factory block will have less lift than the stated height because the factory block is removed during the installation.
This kit is not to be used with add-on air spring or load-leveling products that attach to the extended jounce bumper strike nose on the rear block.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Front-end rake works when you're towing, but it cuts into clearance and tire size when you're not. This leveling kit evens things out up front so you can run bigger tires and give your rig a tougher, more capable look.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Hook up a trailer, load the bed, or add a bumper and you'll see it - rear sag and a nose-high stance. These rear lift blocks bring the height and control back, keeping your truck level and stable under any setup.
Installation Notes:
No drilling through vehicle frame required for installation.
Do not install a Rear Block on top of a factory block. Trucks with a factory block will have less lift than the stated height because the factory block is removed during the installation.
This kit is not to be used with add-on air spring or load-leveling products that attach to the extended jounce bumper strike nose on the rear block.
Tech Tip:
Product does not fit models with 5-lug wheels.
More Information >Vehicle Suspension Specs:
Features:
Hook up a trailer, load the bed, or add a bumper and you'll see it - rear sag and a nose-high stance. These rear lift blocks bring the height and control back, keeping your truck level and stable under any setup.
Installation Notes:
No drilling through vehicle frame required for installation.
Do not install a Rear Block on top of a factory block. Trucks with a factory block will have less lift than the stated height because the factory block is removed during the installation.
This kit is not to be used with add-on air spring or load-leveling products that attach to the extended jounce bumper strike nose on the rear block.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll. The StableLoad pads in this suspension enhancement kit feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll. The StableLoad pads in this suspension enhancement kit feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Carrying drawers or gear in the back but keeping the front light? This MT64 kit adds 2" of lift front and rear and includes shocks, struts, and springs tuned for a smoother, more stable ride when your truck stays loaded out back.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Running gear up front but keeping the bed light? This BP-51 kit adds 2" of lift front and rear and includes adjustable coilovers, shocks, and rear leaf springs tuned for better control, comfort, and stance—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Outfitted for the long haul? This MT64 kit adds 2" of lift front and rear and is tuned to support weight at both ends. Matched struts, shocks, coils, and leaf springs give your Tacoma better control, comfort, and confidence on or off the trail.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Loaded down with gear and feeling it in the ride? This MT64 kit brings back control and confidence with 2" of lift front and rear, using matched struts, shocks, coils, and leaf springs that smooth out the drive and keep your truck riding right.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Running gear up front but keeping the bed light? This BP-51 kit adds 2" of lift front and rear and includes adjustable coilovers, shocks, and rear leaf springs tuned for better control, comfort, and stance—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height because you installed a bumper or winch? This kit restores 2" of lift, smooths out the ride, and brings back control—no cutting, no guesswork, just a suspension that's built for the way you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or just prepping to haul some gear, upgrading your leaf springs will really help you out. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
Built your Tacoma for long-distance travel with gear front and rear? This BP-51 kit adds 2" of lift and is tuned to carry your full-time setup with confidence. Coilovers, shocks, and rear leaf springs improve control, comfort, and capability.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
Loaded down with gear and feeling it in the ride? This MT64 kit brings back control and confidence with 2" of lift front and rear, using matched struts, shocks, coils, and leaf springs that smooth out the drive and keep your truck riding right.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Riding stock but want a better stance and smoother drive? This MT64 kit adds 2" of lift front and rear and includes aluminum-bodied struts & shocks, coils, and leaf springs tuned to improve ride, control, and comfort without guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Built your Tacoma for long-distance travel with gear front and rear? This BP-51 kit adds 2" of lift and is tuned to carry your full-time setup with confidence. Coilovers, shocks, and rear leaf springs improve control, comfort, and capability.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and a more confident stance? This MT64 kit gives your Tacoma 2" of front lift and upgraded struts and shocks for smoother handling and improved control—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Carrying weight up front but keeping the rear light? This BP-51 kit adds 2" of lift up front and improves ride comfort and control with adjustable coilovers and shocks that adapt to how and where you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Outfitted for the long haul? This MT64 kit adds 2" of lift front and rear and is tuned to support weight at both ends. Matched struts, shocks, coils, and leaf springs give your Tacoma better control, comfort, and confidence on or off the trail.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Carrying weight up front but keeping the rear light? This BP-51 kit adds 2" of lift up front and improves ride comfort and control with adjustable coilovers and shocks that adapt to how and where you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height because you installed a bumper or winch? This kit restores 2" of lift, smooths out the ride, and brings back control—no cutting, no guesswork, just a suspension that's built for the way you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height or control after adding a bumper or winch? This kit restores 2" of lift and adds MT64 struts and shocks for better comfort, control, and durability—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Riding stock but want a better stance and smoother drive? This MT64 kit adds 2" of lift front and rear and includes aluminum-bodied struts & shocks, coils, and leaf springs tuned to improve ride, control, and comfort without guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Carrying drawers or gear in the back but keeping the front light? This MT64 kit adds 2" of lift front and rear and includes shocks, struts, and springs tuned for a smoother, more stable ride when your truck stays loaded out back.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and a more confident stance? This MT64 kit gives your Tacoma 2" of front lift and upgraded struts and shocks for smoother handling and improved control—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height or control after adding a bumper or winch? This kit restores 2" of lift and adds MT64 struts and shocks for better comfort, control, and durability—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or ensuring it performs well under moderate loads, leaf springs are a critical upgrade that deliver lasting value. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >
Filters
