Expert Review Video:
Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product is compatible with most in-bed hitches, but does not work with B&W or Reese fifth wheel hitches.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product is compatible with most in-bed hitches, but does not work with B&W or Reese fifth wheel hitches.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Application requires permanent removal of top overload springs (if equipped)
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Application requires permanent removal of top overload springs (if equipped)
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
Designed for vehicles with a GVWR greater than 8,500 lbs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 7-1/2".
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product is designed to work only on trucks with a B&W fifth wheel hitch 1105 or 1199R
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product is designed to work only on trucks with a B&W fifth wheel hitch 1105 or 1199R
More Information >Vehicle Suspension Specs:
Features:
3,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Designed for use on Heavy Duty trucks
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
3,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Designed for use on Heavy Duty trucks
Tech Tip:
For vehicles used in off-road rough conditions, SuperSprings recommends adding their Poly Pad mounting kit P1KT; sold separately.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These air springs create a more stable ride and better handling when you are hauling a heavy load. The springs can be adjusted based on the size of the load to level your vehicle and reduce the strain on your rear axle.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
Designed for vehicles with a GVWR less than 8,500 lbs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 6".
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These air springs create a more stable ride and better handling when you are hauling a heavy load. The springs can be adjusted based on the size of the load to level your vehicle and reduce the strain on your rear axle.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
Designed for vehicles with a GVWR less than 8,500 lbs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 6".
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles equipped with a Reese fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles equipped with a Reese fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
Custom contact helper springs install above your vehicle's rear factory contact leaf springs. The added spring connects with the contact pad and increases stiffness when under load resulting in quicker Load leveling support. Easy installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Product adds a leaf spring to the factory overload spring pack.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
Custom contact helper springs install above your vehicle's rear factory contact leaf springs. The added spring connects with the contact pad and increases stiffness when under load resulting in quicker Load leveling support. Easy installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Product adds a leaf spring to the factory overload spring pack.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with a GVWR greater than 8,500 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are pushing a plow. They reduce strain on your front axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a GVWR greater than 8,500 lbs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,935-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Maintains stock ride height.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Diesel Engine only
Product will add approximately 1" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without Snow Plow Prep Pkg
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with a 5th wheel hitch
Designed for use on vehicles carrying variable Heavy Loads
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with a 5th wheel hitch
Designed for use on vehicles carrying variable Heavy Loads
More Information >Vehicle Suspension Specs:
Features:
3,600-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Snow Plow Prep Pkg
More Information >Vehicle Suspension Specs:
Features:
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product is compatible with most in-bed hitches, but does not work with B&W or Reese fifth wheel hitches.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product will only fit on trucks that have a Draw-Tite Pro Series 15K fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product will only fit on trucks that have a Draw-Tite Pro Series 15K fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your front suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product only fits trucks with B&W fifth wheel hitch 1105 or 1199R.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product only fits trucks with B&W fifth wheel hitch 1105 or 1199R.
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product will only fit on trucks that have a Draw-Tite Pro Series 15K fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product will only fit on trucks that have a Draw-Tite Pro Series 15K fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles equipped with a Reese fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles equipped with a Reese fifth wheel hitch.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Product will fit vehicles with 5th wheel hitch installed
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with a 5th wheel hitch
Designed for use on vehicles carrying variable loads
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with a 5th wheel hitch
Designed for use on vehicles carrying variable loads
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or just prepping to haul some gear, upgrading your leaf springs will really help you out. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or just prepping to haul some gear, upgrading your leaf springs will really help you out. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to your vehicle.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
More Information >
Filters
