Replaces the Linc analog remote for your 5 channel Linc receiver system on your RV. Can be used to upgrade your existing system to have a remote control. Control up to 5 power features with this remote.Features: Replaces the new-style Linc analog remote for your Lippert RV Upgrades your existing system to have a remote control Works as replacement for 2012 or 2013 5th wheels and trailers 5-Channel Transmitter Control slide outs, awnings, lights, and leveling or stabalizerjacks remotely Specs: Transimission range: 30' - 50' Quantity: 1 replacement remote
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
It's never been easier to stabilize, help level and help raise your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Hey Michael, welcome back! The #DMC64JF is the newer production model of the #DOM37FR and is designed to replace it. They are pretty much the same and part of the 310/Part-Timer line. The overall dimensions are slightly different at 18-1/2" long…
Hello again Norm, Thank you so much for the picture, it is most helpful since I wasn't able to get any information off of the serial number. Yes, you found the correct one, the Replacement Toilet Bowl Seal Kit for Dometic Sealand and VacuFlush RV…
Hi Paul, The Coleman-Mach Underbunk RV AC All-In-One Kit w/Heat Pump part #CM82RR is a kit we offer of the underbunk air conditioner unit and the underbunk accessory kit. So, it is a combination of the CM72RR and the CM62RR together. The Coleman-Mach…
Hey Darren, the Coleman-Mach Underbunk #CM82RR has a 2 year warranty that covers it from date of purchase for manufacturer defects. When in auto mode the fan of this does not run all the time. But if you select high or low it will run all the time.…
I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.
We have the perfect solution for you. I'd recommend using the Fulton weld-on drop leg stabilizer jack, part #FSJ1-SJ2. The jack is sold individually, but using two of them would provide 6000 lbs of support which would be plenty, as your trailer…
Manufacturer's don't list the wiper or bulb seals that they use and have been known to run out of a certain kind and switch to another so you honestly have to pull off a bit of your current seal to determine the profile and take some…
Yes, it is true that most types of 5th wheel to gooseneck adapters will cause stresses on the trailer's frame and in some instances may actually void the warranty on the trailer frame. However, there is one type of 5th wheel to gooseneck adapter…
For your Sealand Model 111, I recommend replacing with the: -Dometic 311 Part-Timer RV Toilet - Low Profile - Round Bowl #DOM67FR. This toilet has the same rough-in measurement of 10" that your Sealand has, measure 14" to the seat, an…
Hey Bruce, for the money and the capacity/quantity the etrailer Scissor Jacks part #e64RV would be a really great option for stabilizer jacks for your 2009 Keystone Outback 28KRS. These are rated for 10k so they'd more than you'd need but…
More than likely the issue is going to be the control panel. There are a couple of things you can try before replacing your current panel though. The first thing you can do is to make sure that all of the connections on the back are solid and then…
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Replaces the jack leg for your Bigfoot 8K hydraulic jacks.Features: Replaces the jack leg for your Bigfoot 8K hydraulic jacks Works with all 8K square leg Bigfoot hydraulic jacks Includes jack leg and foot Cylinder and pump not included Made in the USA
Replaces the right jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
Replaces the left jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. Drop Leg Adds Reach: Extends up to 4-1/2" to reduce jack travel during setup. Protected for Weather: Weatherproof buttons, crank cover, canvas jack cover, and black powder coat help protect the jack.
Use your drill to raise and lower your trailer, then check tongue weight before you tow. This kit pairs a 2,000 lb A-frame jack with a jack foot tongue weight scale so you can adjust cargo and verify the load during setup.Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. 14" Lift: Manual A-frame jack lifts trailer tongue weight through the hitching and unhitching process.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 3,500 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
... Heavy-duty jack screw can lift up to 5 tons.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Lift: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Weld-on, pipe-mount swivel jack pivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. 15-3/8" of lift plus 13-3/4" of drop leg travel. ... In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Filters
