Napier Sportz Link Truck Bed Ground Tent | Lifestyle and Assembly Tips from the Manufacturer Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Thanks for the picture Chris! The lift-brackets mount about 29" back from the center of the coupler on the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW0553. It looks like your trailer's tongue isn't going to have…

Hello Hope, thanks for reaching out. Yes, adding Timbrens to your 2016 F250 will definitely help reduce that sagging while you tow. Since they just bolt right on, it is a very easy way to beef up your suspension without any modifications or…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

What I think you are asking is, will you need a slide type hitch for the 2022 Ford F-250 Super Duty with the short bed, 6-3/4' length that has the OEM Prep Package (puck system) when towing a 5th wheel RV. The short answer is no you do not have…

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…