... This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Highlights Eliminates Hitch Rattle: Tightens against your accessory to stop clunking and unwanted movement. Fits Most 2" Hitch Receivers: Works with standard 2" hitches for towing, hauling, or mounting gear.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.This switch mounts to the front of your toad and plugs directly into the unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.The steel hooks on each end of the cables connect to the toad's base plate and the RV's trailer hitch. The spring-loaded latches ensure that the hooks stay connected. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly.
This cushioned gooseneck coupler smooths out your ride and reduces wear and tear on your equipment. The round tube is a universal fit for both 4" and 100-mm gooseneck stems with straight or angled pin holes.Most couplers have a single pin that slides under one side of the ball, but the ShockerHitch has thick, locking bars that cover both sides of the ball, providing added security and reducing rattle. Once the bars have captured your hitch ball, insert the included pin and clip through the lever to secure.
... This conversion kit replaces the pin box with an air cushioned gooseneck connection that absorbs that movement at the hitch and gives you a smoother, more controlled tow.Quiet Towing: Cushioned air bag nearly eliminates banging at the hitch - no metal-on-metal noise. Features to know about Absorbs Road Shock for a Smooth Ride The core of this ShockerHitch coupler is the air bag.
... That vertical shock hits hard. This 4" round tube coupler uses an air bag at the hitch to absorb the impact and give you the smoother ride you want.Quiet Towing: Cushioned air bag nearly eliminates banging at the hitch - no metal-on-metal noise. Features to know about Absorbs Road Shock for a Smooth Ride The core of this ShockerHitch coupler is the air bag.
Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…
The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.
I spoke with Gen-Y about the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers part #325-GH-1325 and they did not have any overall dimensions they could provide. However, I went to our warehouse for you to take some measurements. The overall length…
Hey Dan. If you positioned the hitch ball attachment towards the top of the Curt Rebellion XD Ball Mount item #C83WR you'd be level, assuming the 18" measurement you gave me is the height of your trailer's coupler. There is not a shorter…
The measurement you're looking for on the Gen-Y 2-Ball Mount for 2" Hitch Receivers #325-GH-034 is 2-7/8" to the top of the 2-5/16" hitch ball. I confirmed this with my contact at Gen-Y Hitch.
Hello Douglas, Thanks for writing in, and thank you for your order! I am sorry to report that the manufacturer does not have a weld pattern or installation instructions available for the Sleeve-Lock A-Frame Trailer Coupler #CA-5296-B. I know that…
The #25580 bearing and the #L68149 bearing that you referenced have different inner diameters. The #25580 bearing has an inner diameter of 1.750 inches. This bearing's application is as an inner bearing for a #42 spindle or as an outer bearing…
Hey Marcus, congrats on the new truck! Since your Silverado 3500 has the B&W Turnoverball item #BWGNRK1016, I recommend the B&W Companion item #BWRVK3500. This hitch has a 20,000 lbs capacity and will connect directly to the square gooseneck…
The closest leaf spring set we have available to the 22-1/4 inch length you mentioned is the 3-Leaf Double-Eye Spring #SP-113275. This double-eye leaf spring features a length of 23-1/2 inches from the center of the spring eye to the center of the…
Unfortunately, there isn't a direct replacement, however I recommend going with the Furrion RV Tankless Water Heater #FR93FR with the conversion kit #FR73FR for white or #FR63FR for black. This unit requires a 12-5/8" wide x 12-5/8"…
I'm not exactly sure what you are asking; if it is about how to mount the Lippert shocks, the figure you referenced is simply a part of those directions. If you would like to clarify please let me know so I can get a better idea of what you are…
While we do not carry a direct replacement for your Covenant W914-36FT, the closest I was able to find the: -Greystone 32" Electric Fireplace with Crystals - Recessed Mount #324-000081. Based off of my research, your Covenant heater measures 36”…
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. ... The hitch's cross tube bolts onto your vehicle's frame, behind your rear bumper. No drilling or welding is required. Once the hitch is installed, only the receiver will be visible beneath your bumper.
After a few hours towing a camper, every bump or expansion joint can send a jolt through the hitch. This air-cushioned 2-ball mount fits 2" receivers and lets you tune air pressure for the load, reducing road shock transferred through the hitch.This combo ball mount includes both a 2" hitch ball and a 2-5/16" hitch ball, reducing the need to swap ball mounts when changing trailers. Moving from one towing job to the next takes less setup work, helping your equipment stay ready for the trailer at hand.
You've had close calls with your gooseneck trailer long enough. The 9" offset on this coupler gives you more clearance when you turn. It's perfect for short beds, full-width front trailers, or any setup that runs tight near the cab.If you have a recessed gooseneck ball, there must be at least a 12" x 12" opening in your bed for this coupler to work. In addition, the top of the hitch ball cannot be more than 2" from the top of the bed.
Tow your fifth-wheel trailer with your gooseneck hitch and get the smooth ride that only an air-ride-equipped coupler can deliver. This goosebox and coupler adapter kit has a built-in air bag and bumpers that reduce chucking and absorb road shock.Features: 5th-Wheel-to-gooseneck adapter kit lets you tow your 5th-wheel trailer with your gooseneck hitch Heavy-duty goosebox replaces Lippert 1621, 0719 or Rhino pin boxes Coupler attaches to your truck's gooseneck hitch ball Shock-absorbing coupler uses an air bag and cushioned bumpers to provide a smooth and comfortable ride Limits chucking and jerking to give you better control of your vehicle and trailer Helps extend the life of your truck and trailer by protecting them from unnecessary wear and tear Easy-to-use, lockable lever lets you connect and disconnect the coupler from the hitch ball Simply use the lever to engage or disengage the locking mechanism Dual locking bars hold ball in place to provide added security and help reduce rattle Adjustable air bag lets you easily adapt the coupler to suit your trailer's load Ensures just enough shock absorption for your setup and not so much as to cause a stiff ride Grease zerk fitting at the pivot point makes lubrication and maintenance easy Steel tubing and 4140 cast steel socket provide maximum durability Shot blasted and powder coated to prevent rust Made in the USA Specs: Designed to replace the following pin boxes: Lippert 1621, 0719, Rhino, Curt Helux, Flex Air, Rota-Flex, L05 Rota-Flex, and L05 Rota-Flex SHD Ball size: 2-5/16" Gross towing weight: 24,000 lbs Vertical load limit (maximum tongue weight): 6,000 lbs Coupler stem outer diameter: 4" Distance between pin holes: 2-5/8" 1-Year limited warranty Notes: Safety chain adapters are needed to install your mandatory safety chains.
Get a smooth, safe ride when towing your gooseneck trailer with the fifth-wheel hitch in your flatbed truck. The round tube is a universal fit for both 4" and 100-mm gooseneck stems with straight or angled pin holes.Without the inflated air bag, you won't get the full benefit from the ShockerHitch Air, but you'll still get some built-in cushion with the bumper stops.
Your old gooseneck coupler made every hookup a chore. You'd slam it down, jiggle the handle, and still wonder if it was locked. This one drops on and clicks into place so you don't have to keep walking back to check it over and over.If you have a recessed gooseneck ball, there must be at least a 12" x 12" opening in your bed for this coupler to work. In addition, the top of the hitch ball cannot be more than 2" from the top of the bed.
Easy-to-adjust air bag lets you customize this coupler to get the smoothest possible ride. Air bag and bumpers absorb shock and reduce chucking. Secure latch makes connecting and disconnecting easy. Square tube is 4-1/2" wide.And it also beats up your equipment, leading to premature wear and tear for both your truck and gooseneck trailer. Fortunately, the ShockerHitch Air gooseneck coupler will change all that. Air Bag and Bumper Stop Shock Absorption Technology Using a built-in air bag and rubber cushions, the ShockerHitch Air gooseneck coupler acts like an air suspension between your truck and gooseneck trailer.
You've had close calls with your gooseneck trailer long enough. The 9" offset on this coupler gives you more clearance when you turn. It's perfect for short beds, full-width front trailers, or any setup that runs tight near the cab.If you have a recessed gooseneck ball, there must be at least a 12" x 12" opening in your bed for this coupler to work. In addition, the top of the hitch ball cannot be more than 2" from the top of the bed.
Quick Air drastically reduces chucking, absorbs road shock, and minimizes bounce. The internal air bag works with the pivoting head to achieve a dramatically smoother ride. Replaces Lippert 1621, 0719, and Rhino pin boxes. Made in the USA.
... That vertical shock hits hard. This 4-1/2" square tube coupler uses an air bag at the hitch to absorb the impact and give you a much smoother ride.Quiet Towing: Cushioned air bag nearly eliminates banging at the hitch - no metal-on-metal noise. Features to know about Absorbs Road Shock for a Smooth Ride The core of this ShockerHitch coupler is the air bag.
Kit works with your factory-installed Ford, GMC, Chevy, or Nissan Titan XD underbed gooseneck trailer hitch. Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ford, GM, Chevy, and Nissan Titan XD trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Without the inflated air bag, you won't get the full benefit of the ShockerHitch HD Air, but you'll still get some built-in cushion with the bumper stops. Adjustable Drop Hitch for Towing Different Trailers Adjusting the height of the hitch ball to accommodate for a different trailer takes almost no time at all.
... That vertical shock hits hard. This 4-1/2" square tube coupler uses an air bag at the hitch to absorb the impact and give you the smoother ride you want.Quiet Towing: Cushioned air bag nearly eliminates banging at the hitch - no metal-on-metal noise. Features to know about Absorbs Road Shock for a Smooth Ride The core of this ShockerHitch coupler is the air bag.
When your trailer's big and the road gets unpredictable, this sway control kit steps in to help you stay steady. With adjustable resistance and a complete 2-arm setup, it's built to bring confidence back to your tow.Adjusts to Fit Your Conditions The friction bars are fully adjustable, so you can choose how much sway resistance you want based on the road, your speed, or what you're hauling. More control when you need it, less when you don't. Fits Shocker Sway-Ready Ball Mounts This kit is designed to pair with ShockerHitch ball mounts that have integrated sway bar tabs. Just bolt it on using the included hardware and you're good to go.
Replace your factory 5th wheel pin box with a gooseneck connection for a 2-5/16" ball. The Demco eZ-Latch coupler auto-locks during hookup, and the bolt-on design fits select Lippert and FabEx pin boxes.The trailer couples to a ball in the bed instead of a large fifth-wheel hitch, which clears out more usable bed space when you aren't towing. Add the safety chain kit (SHK35MR - sold separately) to complete the gooseneck setup.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. ... You could outfit your truck with a new fifth-wheel hitch that attaches to your existing gooseneck hitch, but that means having to move a heavy, bulky hitch into and out of your truck bed all the time.
You've had close calls with your gooseneck trailer long enough. The 9" offset on this coupler gives you more clearance when you turn. It's perfect for short beds, full-width front trailers, or any setup that runs tight near the cab.If you have a recessed gooseneck ball, there must be at least a 12" x 12" opening in your bed for this coupler to work. In addition, the top of the hitch ball cannot be more than 2" from the top of the bed.
Filters
