Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardwarePlease check the amperage capacity of your vehicle wiring harness to ensure this light kit will not overload your wiring harness. Packaged kit includes 2 submersible, stud-mount tail lights, 2 amber side markers and a corrosion-proof license-plate bracket Contents: (1) ST6RB, (1) ST7RB, (2) MC36AB and (1) license-plate bracket Equipped with a 25' wire harness and mounting hardware
There are many things to consider when adding electric drum brakes to a trailer. I have included a link to our FAQ article that covers everything you will need. As far as routing the wires, first, you can attach the ground wires for the magnets…
The Electric Trailer Brake Assembly #AKEBRK-7L-SA and similar electric drum brakes like the 10-inch #AKEBRK-35L-SA should have their two magnet wires already routed through the backing plate. This is shown in the linked photo. If you are installing…
We don't offer a block type lift, but we do offer some options that would increase your trailer's ride height. If your 2018 Dutchmen Voltage Triton 3551 Toy Hauler has 7K rated axles, and the leaf springs are currently mounted under the…
Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…
Hey David, great questions! I'll answer them in the same order you asked them: 1 - There isn't an official name for those brackets that I know of. They are part of the trailer frame so I guess technically they are pin box frame brackets, but…
I have an axle that is pretty close to what you're wanting, but is not going to work as the spring center measurement is a bit off and it needs to be just right to work. I do have a solution though. You can get the Timbren Axle-less Trailer…
I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…
Nick, absolutely. Many vanlifers wire the Velit 2000R 12V AC Unit #VE87QV so it runs while the alternator tops off the batteries. It keeps the living space cool while driving long stretches, and when you park, your bank’s already partly replenished.…
Hey John, yes the Furrion Built-In RV Convection Microwave and Air Fryer w/ Trim Kit #FR77AD that you referenced would work great as a replacement for the High Pointe you have now as this is a standard dimension microwave basically exact same…
Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life so there is typically no…
Hi Jeong-Won; the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR fits a 3" wide trailer tongue without a specific height requirement. To add a hinge back onto the tongue you simply have to measure the height. If you have a 3"…
4-3/4" x 4-1/2" Square. Incandescent trailer light kit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount with included hardware. 20' Harness. ... Features: Trailer light kit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex, and rear reflex Built-in license plate light on driver's-side light illuminates license plate 2 Rectangular marker lights are included to provide rear clearance light function Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Compatible with 12V DC systems Mounts on surface of trailer with included studs Includes license plate bracket for mounting driver's side light 20' Wiring harness for making connections DOT compliant PC rated Made in the USA Specs: Tail lights: Dimensions: 4-3/4" long x 4-1/2" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Power draw at 12V: 2.2 amps Bulb type: 1157 and 168 Clearance lights: Dimensions: 2-3/4" long x 2-1/8" tall x 1" deep Power draw at 12V: 0.25 amps Bulb type: 194 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 7504 Optronics # TL27BK PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
16-1/2" Long x 1-3/8" tall. Waterproof identification light bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.Features: LED trailer light functions as an identification bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable stainless-steel base Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 16-1/2" long x 1-3/8" wide x 1-5/8" thick Distance between mounting holes (center on center): 16-1/16" Diodes: 9 3 per light Power draw at 12.8V: 0.153 amps Wire length: 50" Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 15050R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Long-Term Durability: Corrosion-resistant components and high-density rubber built for years of towing under load. Features to know about Does Timbren RV SES Suspension Improve Your Drive? When you're towing, small shifts in weight can make your trailer move more than you expect.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof, LED lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers over 80". Stud mount with included hardware. 25' Harness.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Haul your large boat trailer safely, with these 1" diameter, submersible lights that act as an identification light system, which is designed to indicate to other drivers that your trailer is 80" or wider.Features: LED identification light kit improves road safety by alerting other drivers that your trailer is over 80" wide Sealed, waterproof units include durable, polycarbonate housings and UV-resistant lenses Military-grade construction of circuit boards Urethane potting offers better protection than common epoxy potting Red lenses over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Recessed-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Quantity: 3 lights Individual light dimensions: 1" diameter x 7/8" thick Diodes: 1 per light Input voltage (per light): 9V - 14V Power draw (per light): 0.06 - 0.08 amps Wire length: 48" IP rated: 68 Limited lifetime warranty Sealed, Waterproof Trailer Lights The waterproof construction of these lights make them ideal for use on boat trailers because they often get submerged.
Waterproof identification light kit with (3) 3/4" diameter red LEDs is designed for trailers wider than 80". Supplemental brake function - lights brighten when brake pedal is pressed. ... Features: Trailer light kit functions as an identification light for trailers wider than 80" Supplemental brake function - lights brighten when brake pedal is pressed Black molded wiring harness with 3 red Uni-Lites Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Recessed mount with included black grommets Installation requires a 3/4" diameter hole for each light 3-Wire molded harness 0.18 male bullets White wire for ground Black wire for tail light Red wire for brake light DOT compliant P2 rated Uni-Lites Specs: Individual light dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Approximate wiring length: Overall: 198" Per light: 15" Diodes: 3 (1 per light) Power draw at 12.8 volts: 0.047 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light kit makes it ideal for use on trailers that may be submerged, like a boat trailer.
Designed for trailers with spring over axle configurations that have a 2-3/8" to 3" diameter. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while absorbing road shock and reducing sway.The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to. Timbren Suspension Enhancement Systems are designed to work progressively.
Designed for highway trailers with an underbody steel frame. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while also absorbing road shock. Sway is reduced and trailer tracking behind the vehicle is improved.The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to. Timbren Suspension Enhancement Systems are designed to work progressively.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
12-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's under 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are under 80" wide Dimensions: 12-3/4" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 11-1/2" Diodes: 20 2-Year warranty
This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.Features: LED trailer light functions as an identification light bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 15-15/16" long x 1-1/2" tall x 1-5/8" thick Distance between mounting holes (center on center): 7-1/2" Diodes: 9 Power draw at 12.8V: 0.153 amps Wire length: 50" LIfetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Single-wire design.
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Number of diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Wire functions Black: tail light Red: stop/turn Yellow: backup White: ground Quantity: 1 light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.Features: Rectangular trailer tail light provides stop, turn, and tail light functions Built-in side marker and rear clearance light with reflex reflectors Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail White wire is for ground Brown wire is for the tail lights Green wire is for the stop and turn lights PC rated light produces a 180-degree beam pattern DOT compliant Specs: Configuration: passenger's side (right-hand side) Driver side: STL37RB (sold separately) Dimensions: 7-7/8" long x 3-1/4" tall x 2-7/8" deep Diodes: 17 Power draw at 12.8 volts: Stop/turn signal light: 0.181 amps Side marker light: 0.047 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". Surface mount. 3-Wire pigtail. PC Rated.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.Features: LED Trailer light functions as an identification light bar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated Specs: Quantity: 1 identification light bar Dimensions: 17" long x 1-3/8" tall x 1" thick Distance between mounting holes (center on center): 16-1/8" Diodes: 3 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-1/4" Long x 1-1/4" tall x 1" deep. Identification light bar is designed for trailers wider than 80". Mounts to surface of trailer - hardware not included. 2-Wire pigtail.Features: LED Trailer light functions as an identification light bar for trailers wider than 80" Epoxy sealed, housing eliminates weld joints LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included Included foam mounting gasket creates a weathertight seal during installation 2-Wire pigtail includes power lead and ground wire #10 Ring terminal on ground wire P2 rated Specs: Dimensions: 16-1/4" long x 1-1/4" tall x 1" thick Distance between mounting holes (center on center): 8-1/2" Diodes: 6 Power draw at 12V: 0.3 amps Input voltage: 9V - 16V DC LED limited lifetime warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Filters
