Replacement Axle For Dexter Axle With 68.5 inch Spring Center Length
Updated 01/28/2021 | Published 01/25/2021
Products Featured in This Question
Question:
Hi, I would like to upgrade the axle on my RV. I am looking for Dexter axle with the following specs: Straight axle with hubs and electronic breaks Hub length 86.5 in. Spring center length 68.5 in. Overslung EX lube flange. I contacted Dexter directly, and they suggested contacting a distributor. Are you able to help? Thank you.
asked by: Doug A
Expert Reply:
I have an axle that is pretty close to what you're wanting, but is not going to work as the spring center measurement is a bit off and it needs to be just right to work. I do have a solution though.
You can get the Timbren Axle-less Trailer Suspension # ASR35HDS01 which you can use these brakes, Right # AKEBRK-7R-SA, Left # AKEBRK-7L-SA and this hub and drum assembly # 8-201-9UC3-EZ
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: e track
- Search Results: brake battery
- Search Results: trailer suspension parts
- Search Results: trailer axles
- Search Results: trailer axle
- Search Results: trailer leaf springs
- Search Results: trailer axles accessories and parts
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Article: Trailer Lighting Requirements
- Shop: Buyers Products 5-Position Heavy-Duty Channel with Gussets
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Q&A: Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 5 Bolt Flange - 7,000 lbs
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4
- Q&A: Looking For A 7,000 lb Axle With 68.5" Spring Center And 86.5" Hub Face
- Q&A: Recommended Hanger Spacing for Triple Axle Trailer
- Q&A: Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
- Video: HydraStar Electric Over Hydraulic Disc Brake Actuator Installation - 2017 Keystone Montana Fifth Whe
- Video: DeeMaxx Stainless Steel Drive-In Grease Cap with Plug Comprehensive Review
- Video: The Low-Down on the Mounting Bolts and Hardware for 12" Brake Assemblies
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Q&A: Recommended Axles For Travel Trailer With 68-1/4 Inch Spring Center To Spring Center Measurement
- Q&A: Recommended Grease/Dust Caps for the Kodiak Disc Brake Kit # K2HR526D
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: HydraStar Electric Over Hydraulic Disc Brake Actuator Installation - 2020 Grand Design Momentum 5W T
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Video: Timbren Silent Ride Suspension Review
on Trailer Axles
