Whether you're replacing your trailer brakes or installing some on a new Lippert 4.4K axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 13" to 15" wheels. 4-Bolt pattern backing plate.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Durable magnets ensure consistent braking power Encased in a stamped steel housing E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting hardware sold separately (BRKH10B) Specs: Application: most standard Lippert hub-and-drum assemblies Dimensions: 10" diameter x 2-1/4" wide Mounting flange: 4 bolt Wheel size: 13", 14", 14-1/2", and 15" Axle rating: 4,400 lbs Quick Tip: There's really not a whole lot to getting new drum brakes.
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
That back-and-forth chucking you feel while towing wears on you and your trailer. These cushioned equalizers help smooth things out by absorbing road shock from both axles. You get a more controlled ride with less stress on your trailer.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler. As with other Lippert jacks, it is constructed of powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements.
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.Features: This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer Specs: L44649 Bearing inner diameter: 1.063" L68149 Bearing inner diameter: 1.378" L44610 Race outer diameter: 1.980" L68111 Race outer diameter: 2.361" Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Replaces mid-torque motor with brake for In-Wall RV slide-out system. This motor is easy to install in the side wall and will extend and retract your slide-out with ease.
The middle and rear jack mounting brackets of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set #LC675817 that you referenced are a total of 6 inches in width. That's how much free room…
Hey Richard. The difference in the three MORryde hand rails is how far they extend away from the side of your trailer and how long the railing goes down the stairs. The MORryde item #MR34RV extends out 16" from the mounting point and has a…
We do indeed have a replacement for the 524276 power gear motor, but it is a different part number than what you mentioned. The correct replacement motor will be the Lippert #LC368193.
The length of the #RP94716-61301 Reese Goosebox measured from ball center to the rear of the unit as shown in the provided diagram is just under 29 inches, or 28.95 inches to be exact. The provided diagram also provides some other relevant…
Hey Scott, the correct Reese Goose Box for a Lippert 1116 pin box is the part #RP94716-61301 which does happen to also fit the 1716 since like you noticed they are very close in design and bolt pattern. Not a lot of people know their pin box model so…
Yes, the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote #LC675817 will offer a much more stabilized base for your 2012 Keystone Raptor than the OEM scissor stabilizers. That being said, you may not be able to…
The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w/ Touchpad and Remote - 20,000 lbs #LC358590 is designed for trailers where the measurement from the front landing gear to the rear is 20 feet or less. If longer, then the…
Hey David, thanks for the information! Your 2019 Keystone Montana 3121RL has an 1116 pin box. To replace it you will want the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY45SR.
Hey Abigail, that is a good question. The Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly #LC370761 is intended to be evenly loaded. So the 800 lb rating is for an evenly loaded slide. You would not want to have the full 800 all…
Thanks for the information and all the measurements! I am sorry but the Lippert Patio Upgrade Kit for Toy Hauler Garage Doors item #LC27FR only fits doors that are 94" x 94". It fits a rough opening size of 94" wide x 93-7/8" tall…
I have a few options to replace the iRV33 Stereo. The iRV RV Stereo part #292-101079 you mentioned would require you to enlarge the cutout as well as hardwire the wiring harness which is pretty common for stereo installations. If you are looking for…
Hey James, we need to figure out what leveling system you have on your 2005 Holiday Rambler Ambassador 40 foot and determine if we have a replacement front jack for it. Is there any part number or brand info you can see on the jack leg? If you can…
Electric trailer brakes measure 12" x 2" and are made for Lippert ABS systems. Pads are made of durable friction material for improved braking and longevity Fits 14-1/2", 15", 16", 16-1/2" wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brake does not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gear allows for a more precise setting E-coated backing plate resists wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes Mounting bolts and hardware (BRKH12S) sold separately QAI and CSA certified Specs: Application: Lippert ABS hub-and-drum assemblies Configuration: left and right hand Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Note: These brake assemblies do not come with a sensor, you need to re-use your existing sensor when replacing your brakes.
Replaces the vertical hydraulic pump for your Lippert Components hydraulic RV leveling system.Features: Replaces the vertical hydraulic pump for your Lippert Components hydraulic RV leveling system Plastic tank - no float included Specs: Reservoir capacity: 1.5 gallon Flow rate: 2,250 Psi: 0.5 GPM 500 Psi: 1 GPM Power draw: 2,250 Psi: 150 amps maximum 500 Psi: 90 amps maximum Relief valve pressure setting: 2,200 psi
Replaces the 24" actuator with 18:1 Venture motor on Lippert electric through-frame RV slide-out. Includes both actuator and motor so that you can quickly get back to camping.
Aluminum fold-down steps with 13" deep top step attach to the threshold of your RV. Designed to fit 25" to 28-7/8" wide doorways. Industry standard 8" drop/rise between steps. Adjustable legs keep the steps level on uneven ground.To ensure you choose the correct size for your application, there are a few measurements you will need to take. The Lippert SolidSteps install inside your camper's doorframe. Measuring for this may seem tricky, but once you know what to look for, figuring out the right fit for your RV doorway is easy.
Replacement upper and lower slide racks for standard length Lippert dual rack in-wall slide-outs. Includes replacement rollers.Features: Replaces the upper and lower standard length Lippert slide racks on the fixed side of your slide-out Length: 42-3/4" Includes: 1 Upper slide rack 1 Lower slide rack 2 Rack-end pugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs
Replaces the 18:1 Tuson motor for your electric through-frame slide-out system.Features: Replaces the 18:1 Tuson motor for your electric through-frame slide-out system Works with LCI slide-outs 125802, 132682, 119129, 122747, 131903, 168956, 119128, or 145185 Works with Norco through-frame slide-outs 21700061, R25071, or R25072 Specs: RPM rating: 9,000 Quantity: 1 motor Fits: Lippert electric through-frame slide-out systems: 125802, 132682, 119129, 122747, 131903, 168956, 119128, and 145185 Norco through-frame slide-out systems: 21700061, R25071, and R25072
Keep your revolutionary In-Wall Slide-Out running smoothly with a replacement motor from Lippert Components. This motor is easy to install in the side wall and will extend and retract your slide-out with ease. Get back to camping and enjoy your RV to the fullest with a replacement In-Wall Slide-Out motor from LCI.
Lippert slam latch for RV doors. Sturdy steel construction with rust-resistant black powder coat finish.Features: Lippert slam latch for RV doors Sturdy steel construction with rust-resistant black powder coat finish Includes 2 latch parts and 1 key Component with the handle installs on the front of the door and the other part installs behind the door Specs: Handle part: 4-3/4" tall x 4-3/4" wide Rear part: 5-1/4" tall x 5" wide x 1-1/2" thick Gap between components: 1/2"
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.
This 8-1/2" deep motorized step automatically extends and retracts when you open and close your RV door. A built-in LED light shines when the step extends to help you see in the dark. Non-skid stepping surface. Rustproof aluminum construction.
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.To ensure you choose the correct size for your application, there are a few measurements you will need to take. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth.
Replacement upper and lower slide racks for standard length Lippert dual rack in-wall slide-outs. Includes replacement rollers.Features: Replaces the upper and lower standard length Lippert slide racks on the float side of your slide-out Length: 42-3/4" Includes: 1 Upper slide rack 1 Lower slide rack 2 Rack-end plugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs
Replaces the V-Sync II controller for RV In-Wall slide-out. This dual motor synchronous velocity slide controller is compatible with C, C1, and C2 version controllers.Features: Replaces the V-Sync II controller for Lippert RV In-Wall slide-out Compatible with C, C1, and C2 version controllers Status LEDs are provided to indicate current controller status and faults 2 LEDs (1 green and 1 red) Mode button is used to engage the electronic manual override Power connection is a 12V DC input Unit will operate from 8V DC to 18V DC Spade connection for switch wiring 2 Motor connector inputs Includes 1 slide controller Made in the USA
Filters
