Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…
view full answer...Hey Scott, we have a 4-leaf double eye spring that is rated for 5,200 lb axles with the part #DX45CR which is the very popular size of 25-1/4 inches. I would need to know for sure how long your current springs are to know for sure if this is correct…
view full answer...So I just want to start with the brakes. Due to you having the 4,400LB Lippert axle you will need their Brake Kit #LC66WD for each axle. These brakes are forward self adjusting like the Dexter you were looking at. For a cushioned equalizer I prefer…
view full answer...Hello Camilo, thanks for reaching out. For your 2024 Open Range Roamer 364BSH I recommend the SumoSprings Trailer Helper Springs #SS33HR. These are made for axles rated between 5,000-lbs and 8,000-lbs. I am not sure exactly what axles are on your…
view full answer...Hello again, Camilo. We will undoubtedly have a bearing kit for you, but I am afraid there is no way to look up your 5th wheel to know exactly what bearings you will need. Bearings are fitted by the axle weight capacity, and sadly this is not listed…
view full answer...If you already have brake drums you will not have to replace them unless they are damaged or became overheated and have discoloration on the inside armature surface where the magnet rides, grooves in the armature surface, or severe wear where the…
view full answer...Hey Jim Bob! The Blue Ox Leveling Kit with Wheel Chocks for Trailers and RVs item #BLU47UR only weighs 7-1/2 lbs. They come in a really nice carrying case too so transporting them and storing them will be pretty easy. They have a 30,000 lbs capacity…
view full answer...I was unable to find any information with the numbers on your axle, unfortunately. However, you can contact the manufacturer of the trailer and they should be able to tell you exactly which inner and outer bearings you have. If for some reason they…
view full answer...We definitely carry those! For those parts, you need 2x of the #RG04-080 and 1 of the #DC250L-DCRP. I went ahead and attached helpful demo videos of these products for your convenience.
view full answer...Yes, the Dexter axle part number 4003321 you referenced works with the hub and drum assembly part #8-201-5UC3-EZ which is a 5,200 pound axle. The hub pattern is 6 on 5-1/2. The parts you will need are inner bearing #25580 (4) and outer bearing…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The kit you are looking for is the part #BRKH10B which is nuts and lock washers needed to install the brake assemblies part #AKEBRK-35-SA that you referenced. The nut size is 7/16-20.
view full answer...Filters
- 2056 results