You plug in your trailer and the connection holds steady, no flickering lights, no loose fit. It replaces worn or damaged sockets so your wiring stays consistent every time you hook up.Highlights 7 Way Blade Socket: Standard vehicle-side connector for trailer wiring. Integrated Mounting Bracket: Secures socket to a fixed mounting point. Plastic Protective Cover: Helps prevent debris and moisture buildup. Short Circuit Design: Internal layout helps reduce electrical faults. 7 Terminal Configuration: Supports lighting and auxiliary trailer circuits.
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
According to the linked installation instructions, the shroud located just rearward of the driver's side rear wheel needs to be temporarily removed to access the factory tow package wiring connector. I've provided a photo showing the panel in…
Hello Evan, I can help clear this up. The Curt T-Connector #C68JR that you mentioned is for vehicles already equipped with the factory tow package. Meaning there will be an OEM brake controller plug already present under the dash and the brake…
The Blue Ox base plate kit part #BX2414 that you mentioned can be used with the Roadmaster Sterling tow bar #RM-576 but you do need to use the correct adapter since the two can't be connected directly. So all you'd need for an adapter is the…
To flat tow a 2023 Ram 1500 Rebel, I recommend the following parts: Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 and item #RM-674 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item #RM-522205-5…
Hey Bobby, do you have any idea what brand of gooseneck hitch you have? The only way we'll be able to determine if we have a bracket kit that could fit it is if we first know what brand it is. If it happens to be painted gray that's a really…
The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…
Adding larger wheels/tires to a trailer really comes down to fender clearance. The recommended fender clearance is about 4" from the top of the tire to the bottom of the fender and then about 1" from the tire to the inside of the frame. The…
Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…
While we have not installed the 7-Way RV Upgrade Kit #ETBC7L on a 2019 Subaru Forester or the same generation in our shop. We do have a installation video of this installed on a 2020 Outback which is on the same Subaru Global Platform. So running the…
You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…
The Replacement Towed Vehicle Installation Kit #SM99226 does not include the air hose connector for the Jeep side of your setup. For this part by itself you can use #SM6214 (or transfer the existing fitting from the Explorer if possible). This…
Hello Brian, Yes, there is a plug-in adapter for the 2022 Nissan Pathfinder, I see that Curt is the only one that makes it. I recommend the Curt Spectrum Brake Controller #C99GV, this brake controller is proportional so it works in sync when you…
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 4" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring pack and bottom of trailer frame: 6" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Need a complete rear light setup for your RV? This combination light includes stop, turn, tail, and license functions in 1 unit. It installs easily and provides reliable lighting for safe, everyday use.Features: Combination light designed for stop, turn, tail, and license functions Rectangular design includes license light and mounting bracket for a complete setup Surface mount design for RV rear applications Incandescent lighting for consistent performance White base for a clean, standard look Popular for RV applications Meets DOT lighting requirements Easy installation for quick setup Includes 1 combination light Specs: Color: Red and clear Dimensions: 8-9/16" x 4-5/8" Light type: Incandescent
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 7-7/16" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
... Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Great White series features custom-cut lens optics and ultra-bright white diode for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black housing Clear lens over white LED Compatible with 12V DC systems Surface mount to trailer with built-in license plate bracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Made in the USA Specs: Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 9" Dimensions of bolster bracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
... Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.Features: Low-profile RV tail light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black ABS plastic base with snap-on lens Red and clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver side Passenger side: RVSTLB60 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep Height with license plate bracket: 5" Diodes: 12 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
Built for mounting a bunk board on your boat trailer, this rust-resistant bunk bracket allows the bunk to pivot when you're loading your boat. Slotted mounting hole lets you adjust the bunk height. Use 2 brackets for each board.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Allows your trailer's bunk board to pivot while you load your boat Stabilizes your bunk when 2 brackets are used (additional bracket sold separately) Slotted mounting hole lets you adjust the height during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 2" wide x 9-7/8" tall x 1-1/2" thick
... Durable polycarbonate base. Surface mounts to driver side of trailer with included bracket. 3-Wire design.Features: Oval LED trailer light works as a stop, turn, tail, and license plate light for driver side applications Includes rear reflex reflector and license plate mounting bracket LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Red lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - no cutout required 3-Wire design White wire is the ground Brown wire is for the tail lights Red wire is for the stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Configuration: driver's side (left hand) Passenger side: 328-003-85 (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep Diodes: 22 Wire length: 7" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.Features: Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments One-piece ABS plastic construction resists corrosion Clear lens with white LED Compatible with 12V DC systems Mounts on surface of trailer with included bracket 2-Wire pigtail includes power lead and ground wire DOT approved Specs: Overall dimensions: 8-5/8" long x 2-5/8" tall x 2-1/2" deep Distance between mounting holes (center to center): 3-1/4" Diode: 1 Power draw at 12.8V: 0.054 amps Lifetime warranty on LEDs
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 16-1/4" Dimensions of bolster bracket: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Features: Heavy-duty bracket holds a bow stop to protect your winch Designed to fit around a 3-1/2" wide winch Can also be mounted alone on winch stand Accepts 3" - 4" bow roller or Y-stop Bolt-on installation Does not include mounting hardware Sturdy, 11-gauge pre-galvanized steel construction Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish Made in the USA Specs: Quantity: 1 bracket Dimensions: Height: 13-3/16" Inside width: 3-11/16" Outside width: 3-15/16" Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 3" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 3" wide center roller bracket Dimensions (with bells): 6" long x 4-1/8" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 13" Dimensions of bolster bracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
... Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Durable plastic housing with acrylic lens. Surface mounts to trailer. 3-Wire pigtail.Features: Low-profile LED RV tail light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS plastic base with acrylic lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger side: RVSTL10 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Height with license plate bracket: 6-3/4" Distance between mounting holes (center on center): 7" Diodes: 8 Power draw at 12.8V: Stop/turn: 0.117 amps Tail: 0.053 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Replace your bow roller assembly with this complete kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Black TPR material is stronger than rubber and softer than polyurethane.This complete bow roller assembly includes 1 roller with 2 matching end bells, plus the hardware you need to mount them on your trailer. Simply attach the assembly to the existing bracket on your boat trailer and you're all set! The TPR construction provides ultimate durability and strength over standard rubber rollers.
Filters
