3" x 5" Side Rail Mount For A 15" Spare Tire With 6 Lug Rim
Updated 09/02/2025 | Published 08/15/2025 >
Products Featured in This Question
Question:
I have a R 15 six lug rim and spare tire that I want to mount to a 3 x 5 trailer side rail. Is there a mount available?
asked by: Mike M
Expert Reply:
Hi Mike!
We do have an option that will fit a 3" x 5" frame rail and can be used with a 6 lug 15" wheel. You will want the Extra Offset Trailer Spare Tire Mount by Dutton-Lainson # DL22145. This will bolt on and you are good to go. It is on the expensive side, but it will definitely work.
If you don't mind doing some DIY work, I like the Redline Spare Tire Carrier # 413200. It would either need to be welded on or you could drill through your frame and the carrier, but this could be mounted wherever you wanted. I've seen some interesting installs with this and I included an image of one suck install. It would be more work, but I would probably go this way. Plus it's less expensive.
What kind of trailer are you wanting this for?
Product Page this Question was Asked From
Trailer Spare Tire Mount by Dutton-Lainson
- Spare Tire Mount
- Frame Mount
- Bolt-On
- 4-Bolt
- 5-Bolt
- Trailer
- Marine Grade Finish
- Dutton-Lainson
more information >
Continue Researching
- Q&A: Spare Wheel/Tire Combo Recommendation for 2026 Aluma MC-10 Motorcycle Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Will The Trailer Spare Tire Carrier DL22128 Move Around While Driving
- Q&A: Availability of Spare/Replacement Wheel and Tire for Yakima LowRider Kayak Trailer With Alloy Wheels
- Q&A: Off-Road Adjustable Bottle Jack To Raise ATV For Tire And Suspension Work
- Q&A: Recommended Camper Tie-Downs for a 2024 Ford F-350 w/ a 8' Bed
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Q&A: Do You Grease Inside Of Dexter Nev-R-Lube Hub Or On The Spindle Before Installing The Hub?
- Article: Trailer Lighting Requirements
- Article: Best Boat Trailer Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub



Lazer S.
9/2/2025
Hi Mike, Did you decide to go with the Extra Offset Trailer Spare Tire Mount or try the DIY route with the Redline Spare Tire Carrier? I'm curious to know how it worked out for your trailer, as it could help others looking for similar solutions.