This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle Flexible cable allows for easy positioning Weatherproof, heavy-duty plastic junction box protects wires and terminals from the elements Wire functions: Black: 12 volt power Yellow: auxiliary or reverse signal Red: left brake and turn signal Green: running lights Brown: right brake and turn signal Blue: trailer brakes Ring terminals included Specs: Overall box dimensions: 8-1/8" long x 3-3/8" wide x 2-5/16" tall Distance between mounting holes (on center): 7-3/8" Lid dimensions: 6-5/8" long x 3-3/8" wide Cord dimensions (not including junction box): 5'-5" long x 5/8" diameter Overall length including junction box: 6'
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Seven Functions in One: Covers everything you expect from a full rear trailer light, plus a few extras. Clean Passenger-Side Fit: Matches the driver-side light without the license plate window. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
You're loaded up after dark and rolling out. This light handles the signaling and keeps your plate visible. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Eight Functions in One: Covers everything you expect from a full rear trailer light, plus a few extras. Plated and Legal: Built-in license light on the driver side keeps your plate visible and compliant. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
... Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This trailer wiring junction box provides a fast, easy way to connect your trailer's wiring to either a 6-way or 7-way connector. Makes replacing your trailer's connector simple.Features: 7-Terminal junction box lets you easily connect your trailer wiring to a 6-way or 7-way trailer connector (sold separately) Eases connector installation, and makes diagnostics simple Weatherproof, heavy-duty plastic protects wires and terminals from the elements Ring terminals included Specs: Box dimensions with lid: 8-1/8" long x 3-3/8" wide x 2-3/8" tall Lid size: 6-5/8" long x 3" wide Distance between mounting holes (on center): 7-3/8"
Color coded terminals in the ABS box provides a fast, easy way to connect the wires from the trailer connector to the wiring for either a 6-way or 7-way connector. Makes replacing your trailer's connector simple.
The Curt #C11282 for gas models of the Chevy Cruze and #C11371 for diesel models of the Chevy Cruze are identical in the mounting locations. The difference is in the drop of the #C11371 for diesel models is 5-1/4 inches for exhaust clearance compared…
There are some subtle differences between Curt trailer hitches #C11282 and #C11425. The receiver is longer on #C11425 so it stick out further and they don't have all the same vehicle fits. Hitch #C11282 fits the 2011 to 2015 Cruze excluding…
The Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part #WPR66FR, is the only beam style windshield wiper we offer in 36" in length. I spoke with a representative from Wiper Technologies and the saddle…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
This Spectro trailer wiring junction box provides a fast, easy way to connect the wires from the trailer connector to the wiring for either a 6-way or 7-way connector. ... Features: 7-Terminal junction box lets you easily connect your trailer wiring to a 6-way or 7-way trailer connector (sold separately) Weatherproof, heavy-duty plastic protects wires and terminals from the elements Mounting hardware included Ring terminals (44-5310A) sold separately Specs: Box dimensions with lid: 7" long x 3-1/4" wide x 2-3/4" tall Overall length (with mounting flanges): 8" Distance between mounting holes (on center): 7-3/8" Mounting flange dimensions: 3/4" wide x 1/4" thick Outer diameter of terminals: 3/16" 9709 Spectro Trailer Wiring Junction Box
Durable polypropylene box creates a fast, easy way to connect the wires from the trailer connector to the wiring for either a 6-way or 7-way connector. Makes replacing your trailer's connector simple.
When you're wiring up your trailer, you want everything clean and reliable. This 12-contact junction box keeps your connections organized so you can spend less time troubleshooting and more time on the road.Highlights 12-Contact Design: Connects multiple trailer wires in one secure spot Organized Layout: Keeps circuits neat for easy identification and repairs Durable Construction: Holds up to frequent travel and road vibration Simple Installation: Mounts easily with standard hardware
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
Mount this system to your trailer jack with included U-bolts. Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 14-1/2" Battery box dimensions: 5" long x 3-3/4" wide x 3-3/8" tall Battery box mounting hole spacing: From center to center vertically: 2-7/8" From center to center horizontally: 4-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
You're wiring a trailer with electric brakes and safety isn't optional. This breakaway kit gives the trailer with a backup plan. If it comes loose, the battery triggers the brakes. ... The included 12V battery is rechargeable, and the box is sealed to resist weather and road grime. Specs Application: For use with: trailers equipped with electric brakes Functionality: Triggers: trailer brakes when pin is pulled Power: 12V rechargeable battery Charging: built-in charger maintains battery level Construction: Housing: plastic battery box with weather-resistant seal Mounting: includes bracket and hardware Warranty: 1-Year limited
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailer with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Charger lead wire length: 47" Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 12" Battery box dimensions: 5" long x 5-1/4" wide x 3-3/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
... The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the inside of your trailer's frame Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects the battery from rain and debris with durable, plastic case Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Wiring diagram printed on the case's lid Includes breakaway switch, 2-amp charger, 10-amp-hour battery, battery box, and wiring Specs: Application: single-axle, tandem-axle, or triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 10 amp-hours Charger: Amperage: 2 amps Lead wire length: 38" Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 47" Battery box: Dimensions: 5" long x 8-7/8" wide x 5" tall Mounting hole spacing: From center to center vertically: 1-1/4" From center to center horizontally: 8-1/4" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
Before you tow, press the test button to confirm the breakaway battery is ready. The built-in charger keeps it charged while connected to the tow vehicle, so the kit is ready if separation happens.Side-Load Box: Keeps the battery accessible on the trailer frame. Weather-Shedding Case: Helps protect the battery from rain and debris. TowTether Safety Cable: Creates a dedicated breakaway cable anchor.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.If your vehicle operates on a 3-wire system, it will need to be converted so it will be compatible with the wiring system of your trailer. This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
... The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Lead-acid battery works great in high temperatures Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to the battery Switch installs on your trailer's frame with included self-tapping screws Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes breakaway switch, charger, Lead-acid battery, battery box, wiring, and mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery capacity: Voltage:12V Type: sealed lead-acid Capacity: 5 amp-hours Breakaway cable length: 51" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 24" Charger lead wire length: 12" Battery box dimensions: 6" long x 3-3/4" wide x 5" tall Battery case mounting holes: From center to center vertically: 3-1/4" From center to center horizontally: 5-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
... The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Lead-acid battery works great in high temperatures Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the inside of your trailer's frame Top-loading case provides easy access to the battery Switch installs on your trailer's frame with included self-tapping screws Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes breakaway switch, charger, Lead-acid battery, battery box, wiring, and mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, or triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead-acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 2-1/8" long x 2-1/2" wide Lead wire length: 14-1/2" Charger lead wire length: 36" Battery box dimensions: 6-1/2" long x 4-3/4" wide x 5" tall Battery box mounting hole spacing: From center-to-center vertically: 1-1/4" From center-to-center horizontally: 6" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Designed for use with Dexter electric-over-hydraulic brake actuators (K71-650 and K71-651) Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Mounts to the inside of your trailer's frame or camper compartment Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, and breakaway cable Department of Transportation (DOT) compliant Made in the USA Specs: Application: single- and tandem-axle trailers Battery: Voltage: 12V Type: sealed lead acid Capacity: 9 amp-hours Breakaway cable length: 46" Breakaway switch dimensions: 3" long x 1-1/2" wide Breakaway switch lead wire length: 45" Charger lead wire length: 14" Battery box dimensions: 6-5/16" long x 3-3/4" wide x 5-3/4" tall Battery box mounting hole spacing: From center-to-center vertically: 3" From center-to-center horizontally: 7" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.If your vehicle operates on a 3-wire system, it will need to be converted so it will be compatible with the wiring system of your trailer. This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's electrical junction box, which is located behind the driver's-side tail light.
Filters
