Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Thanks for reaching out to us, Dennis! Do you currently have a winch on your boat trailer, or are you looking to add one from scratch? I see you were looking at the Curt 2-Speed Boat Trailer Winch #C75ZJ rated for 2,600 lbs - is that at or around the…
view full answer...How did your jack attach to its mounting bracket? Is that the single bolt that you mentioned? If so then the only option we have that could work is Fulton jack #F1411300301 which normally uses mounting bracket #P9012-00. And the replacement hardware…
view full answer...The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…
view full answer...You've come to the right place...The correct Bearing Buddies for a Malone Microsport would be the #BB1980A for chrome or #BB1980A-SS for stainless steel. Then for a bearing kit you'd want the part #BK1-100.
view full answer...In order to determine the correct hub and drum replacement you will need to know what bearings your trailer is using. Bearing Buddy Bearing Protectors like the #BB1980A-SS that fit a 1.98" hub bore are commonly found on 2,000-3,500 lb axles, so…
view full answer...The Bearing Buddy Bearing Protector #BB1938 is designed to fit on a 1.938" hub bore and with outer bearing model 09067. In order to choose the correct grease cap or bearing protector, I strongly recommend using a precise measuring tool such as a…
view full answer...The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to install…
view full answer...The Dexter Heavy Duty Suspension Kit #K71-360-00 has equalizers are 7 inches from bolt hole center to center and 5-3/4 inches bolt center to center. This kit when used with double eye springs like #e64SR will give you the 33 inch on center axle…
view full answer...We have one double-eye leaf spring that has a 7,000 lb axle rating. For that you would want the part #e64SR. The hanger kit you would need then to go with that is the Dexter Heavy Duty kit part #K71-360-00. The axle spacing will be 33 inches which is…
view full answer...To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…
view full answer...The best tire we have in the size ST235/80R16 that you referenced would be the #TTWTRTM2358016E. This radial tire is a Load Range E with a 3,520 lbs at 80 psi capacity and a speed rating of 81 miles per hour. Normally trailer tires are only rated for…
view full answer...For the similar winch with strap, I recommend the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs #DL14825 and then adding the Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs #DL24249.…
view full answer...Filters
- 502 results