Which Bearing Buddy Do I Need
Published 04/19/2020
Products Featured in This Question
Question:
My trailer has bearings L68149 and L44649. Does that help at all?
asked by: Sean L
Expert Reply:
The Bearing Buddy Bearing Protector # BB1938 is designed to fit on a 1.938" hub bore and with outer bearing model 09067. In order to choose the correct grease cap or bearing protector, I strongly recommend using a precise measuring tool such as a dial caliper. Hubs can have bores that differ by only a few thousandths of an inch, so getting an exact measurement will help us choose the correct cap for you. There isn't really a "typical" setup for a trailer since the components vary depending on the capacity of the trailer and type of spindle on your axle, so you will need to measure to determine which one is going to be the best fit.
If you can let me know if your measurement differs from the one provided above, I can look to see if there is a bearing buddy that you can use on your trailer's hubs.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1938 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.94 Inch
- 2000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Search Results: trailer winch
- Search Results: winch stand
- Search Results: flat bow stop
- Search Results: boat trailer winch trailer winch
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-100
- Search Results: bearing buddy trailer bearings races seals caps
- Video: Detailed Breakdown of the CE Smith Bow Roller Bracket for Winch Stands
- Shop: CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Search Results: bearing buddys
- Search Results: accessories and parts
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Video: Review of etrailer Trailer Winch - Standard Winch - e25VV
- Shop: Boat Trailer Winch w/ 23' Strap - 10-1/2" Handle - 1,600 lbs
- Video: Yates Flat Bow Stop for Boat Trailers Review
- Video: CE Smith Boat Trailer Roller Bunks Water Test
- Video: Feature Review Fulton Single Speed Trailer Winch
- Q&A: Replacement Hub and Drum Assemblies for 2002 Escort Boat Trailer
- Q&A: Bearing Buddy and Bearing Kit for Malone Microsport Low Bed Trailer
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Shop: Fulton Single Speed Trailer Winch - 7" Long Handle - 20' Strap - Zinc - 1,100 lbs
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Shop: Tongue Mounted Crossbar for Malone MicroSport Trailers - 78" Long
- Q&A: Do You have Grease Caps for a 1.935 Bore Diameter Hub
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Bearing Buddy Recommendation for Fitting Hub Bore that Measures 1-15/16 inch in Diameter
- Q&A: How To Find The Correct Bearing Buddy For Your Trailer
Sean
4/19/2020
My trailer has bearings L68149 and L44649. Does that help at all?