Replacement Trailer Jack to Fit the Mount for a Shelby 5658A Swivel Jack

Updated 02/26/2025 | Published 07/05/2018

Products Featured in This Question

Replacement Hardware Kit for Fulton Swivel Jacks

(77)

$14.17

Question:

The metal failed on my jack and I am in need of a replacement. Single bolt on version with the welded bracket to trailer frame already on trailer.

asked by: Ed F

Expert Reply:

How did your jack attach to its mounting bracket? Is that the single bolt that you mentioned? If so then the only option we have that could work is Fulton jack # F1411300301 which normally uses mounting bracket # P9012-00. And the replacement hardware for that bracket is # F0933325S00. The bolt is a 1/2 inch but it uses that included bushing in the center hole of the mounting bracket.

expert reply by: Michael H

click to enlarge

John N.

2/26/2025

I have a Shelby 5756A the part that holds the wheel on got bent when it fell down backing up I need the bracket and the wheel problem is it’s welded on the eagle trailer is there a way to take out the guts and replace them thx John

Robin H.

2/26/2025

@JohnN there are no replacement parts available for the Shelby. Is the jack actually welded on or just the old bracket? If the jack is welded on you will need to cut it off and weld on/bolt on a new jack. If it is just the bracket that is welded on and it is in good shape we have had other customers successfully install the # FTJ120W0301 on the old Shelby bracket. If you need to replace everything you can bolt on the # MJ-1200B next to the old bracket so you don't have to worry about cutting or welding.