This black ABS plastic base/bezel gives your Optronics MCL13 Series, MCL14 Series, or UCL13 Series clearance light a finished look. The light fits snugly inside the base, and the mounting holes in the base line up with the holes on the light.Features: Bezel/base for Optronics MCL13 Series, MCL14 Series, or UCL13 Series trailer clearance/side marker light Light fits snugly inside of base Mounting holes align with holes on light Hardware not included Open back allows room for wiring Black ABS plastic construction Specs: Dimensions: 3-1/4" long x 1-13/16" tall x 7/16" deep Mounting hole dimensions (center to center): 1-15/16" 3-Year warranty
3-1/4" L x 1-13/16" W x 7/16" D; snap-on ring for MCL13 Series LED lights; polished, chrome-plated finishFeatures: Snap-on ring for MCL13 Series sealed marker and clearance LED lights Polished, chrome-plated finish 3-1/4" Long x 1-13/16" wide x 7/16" deep Snap-on ring enhances appearance of MCL13 series LED lights.
2-9/16" L x 1-1/8" W x 1/16" D; foam gasket for MCL13 Series LED lights; provides weathertight sealFeatures: Use this foam gasket for MCL13 Series sealed marker and clearance lights Provides weathertight seal Measures 2-9/16" long x 1-1/8" wide x 1/16" deep Gasket provides weathertight seal for MCL13 series LED lights.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or a clearance light when properly mounted. Clear lens over Amber LEDs. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Clear lens over Red LEDs. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
The only repair option we have is total replacement with a coupler like the #CA-5210-B you were looking at. Unfortunately, we do not have a latch repair kit for this latch style.
It sounds like there was bleed-over from one of your trailer connector pins to your brake output pin. This can happen with just a little corrosion, so it doesn't surprise me that you unplugged the trailer and plugged it back in and the issue…
The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…
The closest option we have to replace your Atwood 82543 actuator is part #DM72VR, which is the item you referenced. However, this actuator doesn't have the lockout like your Atwood does. For a lockout use #T4748800 as an electric lockout. It…
We have a couple of options for agricultural hubs that fit a spindle with an inner bearing size of 1.25" item #LM67048. I have listed them below: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 item #AH15450ECOMP. This hub matches your current…
Thanks for the information! The wheel part number 60-0000460 you provided for your 2016 Alma 638LW trailer shows as a 175/80R13 tire and wheel with the 5 on 4-1/2" bolt pattern so the Westlake ST175/80R13 Radial Trailer Tire w/ 13" Silver…
That fluid has to be going somewhere! What you can do is have someone activate the manual override on the brake controller in the vehicle cab while checking for leaks. Make sure the reservoir is full though. If it is not leaking at a line or…
Hello Ricky, thanks for reaching out. It sounds like you have an older axle, or maybe even an agricultural hub, because the LM48548 and LM11949 bearings are pretty uncommon these days. Sadly, we do not have a replacement hub that uses these bearings.…
If your 2007 Dodge Ram already had a 7-Way, then all you would need to do is connect the Hopkins Replacement harness, #42145, and install the brake controller and plug it in to the factory tow package plug. If your Ram had a factory 4-Way, there are…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
2-1/2" x 1-1/8" Oblong. Waterproof LED trailer light serves as a clearance or side marker light when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 1-Wire design. P2 rated.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
5-13/16" x 2". Waterproof, LED trailer light serves as a side marker light or a clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
5-13/16" x 2". Waterproof, LED trailer light serves as a side marker light or a clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.
4-13/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Durable chrome plated housing. Surface mount - hardware not included. 2-Wire design. PC rated.
4-13/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance and side marker light when properly mounted. Durable chrome plated housing. Surface mount - hardware not included. 2-Wire design. PC rated.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.
6" x 2-1/4" Rectangle. Waterproof trailer light functions as both a side marker light and turn signal. Amber polycarbonate lens. 16 LEDs. Surface mount on 4-13/16" centers - hardware not included. 3-Wire pigtail. P2 rated.
2-1/2" x 1-1/8" Oblong. This mini amber LED is waterproof and can work as both a clearance light and a side marker light. Mounts on the surface and hardwires to the trailer.
2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.
2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.
6" x 2-1/4" Rectangle. Waterproof trailer light functions as both a side marker light and turn signal. Amber polycarbonate lens. 16 LEDs. Surface mount on 4-13/16" centers - hardware not included. Delphi plug. PC rated.
You need a marker light, a clearance light, and a utility light, but only have space for one. This compact LED handles all three. It lets you light up your workspace when the job runs past daylight and helps keep you legal on the road.
Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount. 2-Wire pigtail. P2 rated.
6" x 2-1/4" Rectangle. Waterproof trailer light functions as both a side marker light and mid-ship turn signal. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire pigtail. P2 rated. 16 Amber LEDs.
Filters
