What Size Lug Studs Come With the Buyers Products Stake Pocket Spare Tire Carrier

Question

Question:

I bought this tire carrier and need to know what the thread pitch is for the 1/2inch press in bolts. I took it to the local hardware store and couldnt find a match. The wheel that I am trying to mount has small diameter holes and I need a smaller diameter lug nut to fit. Thanks,

asked by: Darryl B

0

Expert Reply:

The Buyers Products Stake Pocket Spare Tire Carrier part # 3375201012 has both 9/16"-18 and 1/2"-20 lug studs.

expert reply by: Conner L

0

Answer 1

The Buyers Products Stake Pocket Spare Tire Carrier #3375201012 fits most standard 3-1/2 in. and 3-3/4 in. stake pockets. It is compatible with 5 on 4-1/2 inch, 5 on 5 inch, 6 on 5-1/2 inch, and 8 on 6-1/2 inch bolt patterns.

view full answer...

Answer 2

Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud #DE52GR which is 2" long overall, or the #DE45GR which is…

view full answer...

Answer 3

Hi Lane, The closest option we have to the measurements you provided would be the DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long #DE52GR.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 10

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

What Size Lug Studs Come With the Buyers Products Stake Pocket Spare Tire Carrier

Product Page this Question was Asked From

Continue Researching