Choosing the Right Type of Trailer Light Video

Hey Marc, yes the locking hitch pin part #WS54CR will work with the stacked Replacement Shank for Gen-Y Adjustable Ball Mount #325-GH-306 you are interested in but since would prefer the hitch pin locks to be keyed alike a better option would be the…

Hello Ron, thanks for reaching out. The Weigh Safe Hitch w/ Built-In Scale #WS68RR and the Replacement Hitch Platform for Weigh Safe 180 Pro 2-Ball Mounts #WS55RR do use the same shank size and pin so the ball platforms are interchangeable. The Weigh…

Hey Philip, it looks like in the time since you asked this question you returned your #WS73RR and replaced it with the #WS63RR. Did you get what you need figured out?

Hey Steven, I was not able to find an exact replacement that uses those measurements, but I got pretty close. I recommend going with the Optronics #BUL69CB light bar. The overall dimensions of this light are 15"L x 1-3/8"W, with the…

The startup wattage requirement for the Furrion Chill HE part #FR52PR is 3,500 watts.

Hub and drum assemblies, like the Dexter #8-430-5UC3 you referenced, are universal so they typically fit any 9K - 10K axle just fine. With that being said, there are some exceptions out there so you just need to confirm that your axle uses a #387A…

Hey Jeff! The Weigh Safe 180 Hitch 6" Drop Hitch w/ 2.5" Shank item #WS82CR has a 8,000 lbs towing capacity with the 2" hitch ball and a 18,500 lbs capacity with the 2-5/16" hitch ball. For a locking hitch pin you'll want the…

Hey Arron, I have the perfect solution for you with the Weigh Safe 180 Hitch 2-Ball Mount for 2" Hitch #WS64MR because it has that aluminum construction you're looking for, and the hitch balls are stainless steel so you can be confident they…

Hey Linda! The Weigh Safe 180 Hitch 2-Ball Mount for 2.5" Hitch #WS82CR is a great option for your farm truck because almost everything is made of aluminum. The hitch balls are actually made of stainless steel so they will be just as durable as…

I understand. It took me a minute but after I went out and looked at a pontoon boat trailer we have outside it does make sense. So at one end of the bunk board you want to attach it directly to where a bracket such as #CE10052-32G normally would…

As the bunks will be support the weight of your pontoon boat, I always recommend getting them to the end of the transom, or as close as possible. As you mentioned using 14 foot long boards, you will want at least 4 evenly spaced support brackets per…

Yes, the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10192GA-4 will work as replacements, and you're definitely doing the right thing in replacing them due to the corrosion. You will need to use the CE Smith U-Bolts…