Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-9/16" L x 1-1/8" W x 1/16" D; foam gasket for MCL13 Series LED lights; provides weathertight seal
Features:
Gasket provides weathertight seal for MCL13 series LED lights.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at and showing you how to install a black foam gasket for MCL13 series LED lights.This is what your gasket looks like. It's going to go that extra mile to ensure a watertight seal. It's also going to give a nice foamy soft surface to put in between your light and whatever surface you may be mounting it on. The gasket will also work well if you don't have a perfectly flat surface like we have on this bracket here. A gasket can actually help fill that void when you put your light on it, as you can see there.Now I'll show you how easy it is to install our gasket. You run your wires through the center hole and then through the mounting hole.
If you're using it with a gasket and a chrome bezel, you simply put the chrome bezel over both of them, and run your wires through.Now using your existing hardware, or even some new hardware you pick up from your local store, we're going to secure our light to the trailer.That will finish up our look and install of the black foam gasket for MCL13 series LED lights.
Work as advertised. Fast shiping. Etrailer rocks..
Works perfect with optronics lights
When my clearance light quit I ordered the Optronics MCL13A2B light, the MCL13C2B chrome ring, and the MCL13G2B gasket. So this review is actually of all three products.
I wanted to make a watertight installation and actually wasn't exactly sure how to best accomplish that. So here is what I did.
1. I place the gasket on the chrome ring.
2. I ran a bead of silicone around the gasket edge inside the chrome ring.
3. I placed the LED light into the chrome ring. My objective is to create a sealed light assembly.
4. I then backed the chrome ring with butyl tape and mounted it on the trailer.
The light is sealed from the back by the butyl tape and the silicone plus the gasket keeps the water from entering from the front.
I've ordered clear caulk which I will apply on the top half of the light to further seal out water.
Works as it should.
The price I feel Etrailer can do better. Not sure if there should be a note when using the gasket it might interfere with the ground that is built into the light.
The light and associated parts were just as described and work great. The LED's are very noticeable. Thanks e-trailer.
Danny G.
5/31/2016
Still working after a year. Very pleased with product
I bought red and amber LED marker lights and replaced all of the old corroded ones on my boat trailer. It didn't take long and they work great!
I’ve used this for about 9 months on an off-road adventure trailer, and it’s held up great. I like the design, they’re easy to install and the plastic lenses snap in snugly. I also like that they’re low profile and don’t stick out much at all. Great product.
Product is what it is for upgrading my boat trailer running lights. Etrailer has great product availability, very good and fair pricing and super service and fast shipping. The reasons I buy from eTrailer whenever I need cargo and boat trailer parts.
Product is what it is for upgrading my boat trailer running lights. Etrailer has great product availability, very good and fair pricing and super service and fast shipping. The reasons I buy from etrailer whenever I need cargo and boat trailer parts.
I bought these for my son's 5th wheel hitch after he saw mine and is very happy
Have used these gaskets on both marine and utility trailers. They cushion vibration and provide clean edge detail for your lights. Recommend
The on-line service was great, done by David. He was so helpful. He even researched whether the product would fit. Can't thank him enough. We will certainly use etrailer again.
They do what they're supposed to which is keep the insides of the lights dry.
I would like to have a thicker gasket maybe a rubber one would work better for me because this is my lower marker light and can get a lot of water and snow.
But shipping was fast and the order was wright
thank you
What more can you say? It's a foam gasket for a light! I suppose it is properly cut and will suit my needs for a travel trailer perfectly!
Arrived on time perfect
These foam mounting pads protect the underlying paint and seal up nicely behind the lights.
Fit my ATC Toyhauler perfectly. Alyssa S spent much time on the phone with me to insure everything I ordered was correct. She is a wonderful customer service representative.
Nice finishing touch to my LED side mar kers.
It's a foam gasket as stated. Die cut gasket does work with the LED piece.
How it holds up to the outside elements is anybody's guess.
As described. Fast shipping
John
7/29/2016
Thanks for following up. Still works great, no complaints. Will definitely purchase from you guys again.
Great products and great service from e trailer!
Fits the 2 diode led light perfectly
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
The T.
7/1/2022
THe lights still work well. Better than the ones the trailer came with.