This long, thin tail light fits in those tight spaces on your trailer or truck where you couldn't fit anything else. It mounts on the surface and wires to your trailer with the included 3-wire pigtail.Features: Thinline Series light fits in tight spaces GloLight tail light is bright and easy to see, day or night Bar glows for tail light Center LEDs light up for brakelight and flash for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-wire pigtail wires to trailer Black wire for tail light Red wire for brake and turn signal White wire with #10 ring terminal for ground DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 17" long x 1-3/8" tall x 1" thick Mounting holes: 16-1/8" apart on center Pigtail harness length: 7" Diodes: 28 Power draw at 12.8 volts: Stop/turn signal light: 0.634 amps Tail light: 0.445 amps Lifetime LED warranty
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately). Works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Compatible with 12V DC systems Diodes: 22 Power draw at 12.8 volts: Tail light: 0.259 amps Brake and turn signal light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
Hello Lawrence, Thank you for all the details, it is most helpful. The Hullavator is a great system, so I can see why you would want the right set-up so you can continue to use it. I do not have a database that supplies me with all the specs on the…
Hello Stuart, thanks for reaching out. I have provided a picture showing the wiring diagrams for the Roadmaster Diode Kit #RM-15267. I have also included a link to the manufacturer instructions, as well as a link to our video showing installation on…
Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…
According to all of the information you gave me, it does sound like the Trailer Idler Hub Assembly for 3,500-lb Axles #AKIHUB-555-35-K will be a fit for your trailer. I did have trouble looking up specifics for the part numbers you sent in though so…
Hello Nathan, Great question. There are 2 key factors with finding the right Gen-Y Gooseneck, the pin box number, and the pin weight (tongue weight). I was able to look up the GVWR of your 2022 GD Reflection 367BHS which is 14,995 lbs. They have a…
The Hughes Autoformers are certainly the deluxe of all the power protection products. On top of all the low-voltage, high-voltage, Mis-wiring protections they offer - the hardwired units offer protection from thieves! This unit goes inside your coach…
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
To attach the aluminum diamond plate to the floor of your utility trailer, you can use self-tapping screws like #FA1131822 or something longer depending on how thick the aluminum is. I recommend using one about every square foot if possible. These…
Hey Bob, the Small Edge Trim part #362ET4119-25 that you referenced comes ready to install and does not require additional wiring or adhesive. You'd be able to press it onto the fender as-is and it will stay on and work great.
Yes, the Electric Trailer Brake Kit #AKEBRK-6 will fit your 12x2 AL-KO drums. There are actually 2 different seals that are common among 5.2K - 7K axles like what you have. The first are the seals #RG06-070 which have the 2-1/4" ID and…
Hello Vee; your Xantrex XADC 8012 is an 80 amp converter charger. For a replacement we have the Progressive Dynamics 9300 Series RV Converter Charger - 12V - 80A #PD89RR. This is compatible with flooded lead acid, AGM, and LiFePO4 batteries.
The male thread of the Replacement Adapter Fitting #T4871700 being longer would not be an issue when installing it in the back of the Dexter actuator part #K71-650. Pressure from the male side flare fitting to the actuator is what seals it so the…
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately) and has a weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer band glows for a tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) Weatherproof connector requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture and protect your wiring.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts in cutout with grommet (sold separately) and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts with built-in flange. Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4-5/16" Requires 4-1/2" cutout Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
Versatile 3/4" amber LED works as a clearance, marker, or third brakelight. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. Quick wiring with an 8", 3-wire pigtail - just connect and go. ... Highlights Versatile, Dual-Intensity Light: LED functions as a clearance or side marker light and features a high-output mode for use as an auxiliary third brakelight. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts with built-in flange and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4" Requires 4-1/2" hole in trailer for flange to sit flush Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
Versatile 3/4" red LED works as a clearance, marker, or third brakelight. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. ... Highlights Versatile, Dual-Intensity Light: LED functions as a clearance or side marker light and features a high-output mode for use as an auxiliary third brakelight. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
Versatile 3/4" amber LED works as a clearance, marker, or third brakelight. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. ... Highlights Versatile, Dual-Intensity Light: LED functions as a clearance or side marker light and features a high-output mode for use as an auxiliary third brakelight. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light, the center a turn signal, and both are a brakelight. Mounts in cutout with grommet (sold separately) and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring function as tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) PL-3 connector works with 3-prong plugs (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
Versatile 3/4" red LED works as a clearance, marker, or third brakelight. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. Quick wiring with an 8", 3-wire pigtail - just connect and go. ... Highlights Versatile, Dual-Intensity Light: LED functions as a clearance or side marker light and features a high-output mode for use as an auxiliary third brakelight. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts with the built-in flange. Designed with a weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-5/16" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 11/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts with the built-in flange and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-5/16" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 11/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts in cutout with grommet (sold separately). Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal, brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light face diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo tail light is bright and easy to see, day or night Inner ring glows for tail light Outer ring flashes for turn signal and brightens for brakelight Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surface mount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal/brakelight. Mounts in cutout with grommet (sold separately). Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light face diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts with the built-in flange and comes with a 3-prong plug for quick installation.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with built-in flange Hardware not included 3-Prong plug connects to trailer DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
8-3/8" x 5-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV. It comes with a built-in reflector. It mounts on the surface of the motorhome and hardwires with the 3-wire pigtail harness.Features: Low-profile RV brake, turn, and tail light Built-in reflective lens increases light output Waterproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount Included gasket creates weathertight seal Hardware not included 3-Wire harness hardwires to RV Specs: Dimensions: 8-3/8" long x 5-3/4" tall x 7/8" thick Diodes: 52 1-Year warranty
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. ... Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surface mount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
Filters
