Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 7" round GloLight tail light keeps your trailer or rig easy to see in any lighting. The inner ring glows for the tail light, while the outer ring flashes for turn signals and brightens for braking, giving a crisp and modern halo effect. With 32 LEDs behind a red lens, it’s much brighter and more efficient than old incandescent bulbs. The tail circuit draws just 0.135 amps and stop/turn only 0.340 amps at 12V DC, so you get high visibility without heavy power demand.
Moisture and vibration can take out lesser lights fast, but this one is sealed up tight. A weather-resistant polycarbonate housing and acrylic lens keep dust and water out, while the included gasket creates a weathertight seal against the mounting surface. It’s tough enough for years of use in wet or rough conditions and carries a lifetime warranty on the LEDs for added peace of mind.
Nobody wants to fuss with complicated wiring or bulky fixtures. This light mounts cleanly on any flat surface using screws (not included) and plugs in with a female AMP-style connector for quick setup. At just 1-5/8" thick, it sits close to the surface for a neat look without sticking out awkwardly.
You won’t have to second-guess whether this light meets road regulations—it’s already certified to DOT, FMVSS 108, and CMVSS standards. That means it’s cleared for legal highway use while maintaining the bright, modern style that sets your setup apart.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the round seven inch glow light three function LED transit light.Now this is a nice round trailer transit light that'll serve three functions, tail light function, brake light function and your turn signal light function.This one happens to be a glow light design. This glow light lens will create a nice solid light pattern, it's a nice smooth appearance. The outer band of LEDs will function as a turn signal and brake light and that solid section, the glow light part will act as a tail light.I am going to hook this up to some power in the end of the video here just to show you how bright it is.This is a sonically sealed waterproof housing and lens unit. It is submersible. It's a polycarbonate housing and an acrylic lens and this light does use the SMT technology, which is surface mount technology.It's a durable construction of the LED circuit board. Helps better withstand shock and vibration, allows improved heat distribution and thinner construction.The LEDs of this light will make great replacements for incandescent lights because they'll last 50 times longer, they're more efficient, they'll provide brighter light with less power output and of course no bulbs to replace, no brittle filaments to break and there is a lifetime warranty on the LEDs.This is a red lens over 32 white LEDs.
It is designed to Mount on the surface of the trailer with the built-in flange. Now the hardware to install this is not included. It does include the gasket on the back. This does accept the industry standard three prong plug. We do sell that separately on our website.This light is DOT, Department of Transportation compliant.
It does meet the federal motor vehicle safety standard 108 and the Canadian motor vehicle safety standard requirements for automotive lighting.A few specs on this. The power draw at 12.8 volts for the tail light is .135 amps. For the stop and turn light circuit is .340 amps.Dimensions on this again. Diameter of this is seven inches. Total depth of it is right about one and five eighths inches and what I've done is connected some clips to the plugs.
We can turn the power on and show you what it lights up like.We'll go ahead and turn our 12 volt power on. You can see there's your glow light, the middle section. I'll go ahead and turn off the overhead lights and probably on the video that you're looking at, this ring actually probably looks yellow, but actually in real life it is a red ring, so it's a solid, that would be your tail light function. Then when you hit your brakes, there would be your brake lights. Then when you do your turn signal, that would be your turn signal also.Go ahead and turn back on our overhead lights and we'll turn off our 12 volt power, but that should do it for the review on the round seven inch glow light three function LED transit light..
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Really happy with this purchase. Makes the trailer highly visable in bad weather and at night.
The order experience was great . You kept me informed where my order was and that it was in time.
Great experience.
They came a day earlier that thought. Hope to install next day or so.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Fred
6/19/2026
Great! Brightest lights on any of my ehicles