Review of the Thinline LED Trailer Tail Light Video

Hello Lawrence, Thank you for all the details, it is most helpful. The Hullavator is a great system, so I can see why you would want the right set-up so you can continue to use it. I do not have a database that supplies me with all the specs on the…

Hey Tom. The highest capacity drum brake assemblies we have for a 4 bolt brake flange are the Dexter Electric Trailer Brakes item #23-105-106-09. These are a 6,000 lbs set that are mainly used with AL-KO/Hayes axles. Do you have any part numbers or…

Although the DOT numbers you gave me are codes for what testing was done on the lights, I do have a solution for you. For your 2-1/2" round clearance light we have the Peterson Piranha LED Light #162R with the wiring and grommet as part…

If you check out the attached picture of the Hot-Line LED Third Brake Trailer Light Bar #328-003-6017R that you referenced you can see that the wiring harness is right in the middle of the back of the light. A hole that is 3/4 inch in diameter would…

To convert a trailer to LED taillights is just a matter of swapping the fixtures with LED models or replacing the bulbs of the fixtures with the LED version. Unlike vehicles you don't have to swap in any special harnesses or resistors. Since you…

Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I went ahead and…

The height restriction on ramp set #288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them. The shorter the ramp the more severe the angle will…

Hey Jerry! The 6' x 14-1/2" Flint Hill Goods Easy Carry Trailer Ramps #FHG23ZR can be used with up to a 16" tall trailer. Anything taller than that and you'll need a long set of ramps like the Gen-Y #325-GH-R84 that are 7' long…

According to Gen-Y, their #325-GH-R84 84 inch aluminum loading ramp would be perfect for your 24 inch deck height. I've linked to a product demonstration video featuring the #325-GH-R84 84 ramp.

At one point the ends of the Gen-Y Ramps like the part #325-GH-R84 were different but at this time the ends of the ramp look like what you see in the attached photo.

We do! There are a variety of trailer ramp styles and needs out there so we have quite a selection to choose from. For example, we have the 60" x 14-1/2" Aluminum Car Hauler Ramp Set #288-07502 rated for 6,000 lbs, the 84" x 14"…

The Gen-Y Hitch Aluminum Loading Ramp Sets like part #325-GH-R84 can be used on car hauler trailers with multiple cars per Gen-Y. I have attached the full list of options below.