Search: tubing   >  

The CE Smith Keel Roller for Boat Trailers #CE29505 is our only self centering keel roller. It is 12" wide versus the 8" that you are looking for. We do have the CE Smith Panel Bracket for 12" Boat Trailer Rollers #CE10305G and Roller…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Since you have a 2 wheel drive version of the 2018 Ford F-250 the correct Air Lift LoadLifter 5000 is the part #AL88391 as the part #AL88399 is for the 4 wheel drive versions. Both of these are compatible with in-bed hitches like your Turnoverball as…

The bunks should be what's bearing the weight of the boat on the trailer and the rollers like the #CE32015G are designed to make enough contact that they guide the boat on the trailer but not fully support the boats weight. Think of them as…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

I looked up your vehicle and was able to come up with two different 5th wheel trailer towing capacities you could have. If you have a 3.73 gear rear end you would have the capacity for a 12,200 lb trailer. If you have the 4.10 gear rear end you would…

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

The Sink Strainer w/ Threaded Basket and Tail Flange for 2" Drain part #3729490-217-022 is meant to be used with standard 3/4" plumbing lines found in camper's.

The measurement that is typically needed most is the drain opening of the sink itself. The most commonly found drain diameter in RV sinks is 2 1/8". When you're shopping for strainers and baskets, they'll be sized according to drain…

DOT 3 or DOT 4 brake fluid is recommended for Demco brake actuators like the #DM72VR. You should never use DOT 5 as it will wear out seals very quickly.

So there are a couple of possible issues here, though just to answer your question about larger brakes, you do need to stick with 10 inch brakes as 12 inch brakes will be too large. Based on my research, your Forest River Flagstaff E-Pro E20BHS. The…