Customers compare AR84FR to these similar products
Products Featured in this Video
Today we're going to take a look at the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System. Now, this self-aligning boat loading system will ensure that you're able to safely and easily guide your boat to the center of your trailer despite any strong winds, current or rough water conditions. These Ezi-Guides help you avoid loading the boat off the rollers and possibly damaging it, and these… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Videos
Help Articles
Expert Answers
The keel roller will help to center your boat as the wobble rollers you have allow the boat to sit slightly to one side or the other. We do offer the CE Smith Keel Roller #CE29505 which has a self centering design to help guide your boat to the…
view full answer...I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really well and…
view full answer...I recommend the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System #AR84FR for your 22' boat. These mount to the rear cross bar that is 1.96" to 2.57" and are spring loaded to push your boat to the center of your trailer. Since…
view full answer...The CE Smith Bunk-Style Guide-Ons for Boat Trailers part #CE27600 can be used on any trailer but traditionally they are not used on pontoons. Not saying we do not install them on pontoons. As a matter of fact we used the CE Smith Bunk-Style Guide-Ons…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...You could use roller bunks such as #DL21740 on a pontoon boat trailer. If the pontoons sit on carpeted bunks and support the boat then you would need to place rollers the whole length of each of the carpeted bunks. Set #DL21741 is rated higher at…
view full answer...Yes, you can definitely use roller bunks with your 21 foot pontoon boat. Roller bunks have capacities, and while pontoon boats can obviously vary quite a bit in weight, roller bunks with a 3,000 lb boat capacity should be for that size boat. I…
view full answer...I don't have a video I can share with you, so the attached photos are the best I can do to hopefully give you an better idea of how the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat #AR84FR work.…
view full answer...I am sorry to hear you are having problems with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL88375. If adjusting your air pressure up and down hasn't helped with the bouncing you may have a spacer problem. Without the right…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...For your setup, I recommend the Rear View Safety Backup Camera System with Side Cameras #RVS-062710 and Quick Connect Kit #RVS-2133. This will give you two additional cameras to allow you to see the blind spots from your trailer better for turns and…
view full answer...Sounds like you are referring to guide on rollers like the CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610. These mount at the rear of the trailer frame and act as a guide to allow the boat to slide on as easy as possible. I attached a…
view full answer...