Search: PK12706   >  

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

The Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath #8-285-10UC3-A is the replacement option we have. The only difference is the wheel studs are 5/8 inches instead or the 9/16 inch wheel studs of your current hub. This comes…

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

The replacement hub/drum you would need is the part #8-219-50UC3. Because you gave me the grease seal number I was able to determine that there is only one Lippert spindle size that has the 10-36 seal. The #8-219-50UC3 also has the same bolt…

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A which is the same size drum you mentioned of 12-1/4 inch by 3-3/8 inch and also has 5/8 inch wheel studs.

For the brake circuit of your trailer you will want to run 10 gauge wire like our part #10-1-1 which is sold by the foot and is standard copper primary wire. We use it all the time here on trailers and it works great. For bonded 14 gauge wire that…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

Great question! The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles #TSR14KT01 have an articulation of 1-27/32 so you need to make sure that you have about 4-5/8" of space above your tire. I confirmed this with my…

This particular model of the Silent Ride suspension, #TSR14KT01, is rated for 14,000 pounds and has a 3 inch round axle seat. I have included a picture that shows all of the important measurements for this unit for you as well. Current pricing is…

The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part #AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or, we have the part…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

The Mighty Cord RV Power Adapter Y-Cord part #A10-50X30Y will provide you with 25 amps at each 30 amp female receptacle assuming the shore power hookup is supplying a full 50 amps. No matter what type of adapter you use, you will be limited to the…