Hi Kevin! You can definitely put aftermarket TPMS on this tire/wheel combo! The Tamarack ST225/75R15 Trailer Tire with Black Mod Wheel - 6 on 5-1/2 - Bead Balanced #TA76AR includes a fairly heavy duty valve stem, so that is no problem at all.…
Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…
The Trailer Axle with Electric Brakes part #e73SR is made by AxleTek. If you're looking for a more well known manufacturer, we offer this same setup from Dexter as well, the Dexter Trailer Axle with Electric Brakes part #8327826-EB which is also…
Leaf spring hangers come in different heights to provide more or less clearance between the trailer body and the suspension. Manufacturers determine the best spacing for the axles and sizes of the hangers, leaf springs, equalizers, and shackle straps…
Hello Ryan, I am very sorry but we do not make custom axles, they come directly from the manufacturers already put together. We used to do custom axles many years ago, but there were too many wrong measurements sent in so we no longer offer that…
Hello Rene, thanks for reaching out. It is pretty typical for RV manufacturers to use axles that are not rated for the full GVWR. They say this is because 10%-15% of the camper weight is on the hitch instead of the axles. They will put the bare…
The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…
The bend in an axle (the top of the arch) should be at the top of the axle so that as the trailer load is placed on the axle it flattens out. The spring seats #TRSS238 should be welded to the underside as shown in the linked diagram.
For your application you need the Pre-Greased Easy Grease Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K. This matches all of the specs you mentioned and while it's only rated for 3.5K axles, it will still work for your Lippert 4.4K axle since…
Hey Kevin, due to the age of your trailer there aren't any current bearing kits that are going to work. I am guessing this is a very old trailer based on the bearing numbers. If the trailer is older than late 90's typically the bearings…
I have a solution for you, but as the short spindles have not been produced for some time now, there will not be a hub that will fit them properly, unfortunately. You will need to replace the spindles with the BT8 Spindle for 2,000-lb Trailer Axles…
Filters
