Video Transcript for Review of Dexter Trailer Suspension Parts - Suspension Bolts - DX57VC

Hi everyone, Steven here with etrailer. Let's take a real quick look together at this Dexter three-quarter inch by four-and-a-half inch long spring eye bolt for 10,000 pounds general duty slipper springs. So folks with this bolt, you should be able to replace a worn, damaged, or lost spring eye bolt on that Dexter 10,000 pound general duty slipper spring suspension. This bolt is a three-quarter inch thick or diameter, and from the inside usable length to the end of the thread is four-and-a-half inches. That's where they're getting their four-and-a-half inch length. So again, this fits standard Dexter hangers and equalizers without excess bolt length and everything here works great with a lockout nut by Dexter sold separately.

This would give you a long lasting clamp and then you can pair that as well with a Dexter tandem-axle equalizer kit, also sold separately, for two-and-a-half inch wide slipper springs to complete the kit if you need all that. But if all you need is the bolt, we got the bolt right here, and again, the lock nut is sold separately. That will wrap up our quick look together at this Dexter bolt. I'm Steven, thanks for watching.