Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I do have an option for you but unfortunately there is not a fabric conditioner available for the Camco UltraGuard 5th Wheel Cover part #CAM45757 or any other brand. Even if there was a fabric conditioner available it would most likely still become…
view full answer...The 275/70-R19.5 tires your customer has have an overall diameter of 34.7". This will need to be the measurement you use to determine the correct size wheel cover. With that being said, the Adco Ultra Tyre Gard RV Wheel Covers part #290-3955…
view full answer...The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00 that you referenced. Based on what you described it sounds like you may have damaged the old motor when you attempted to clean it.
view full answer...The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…
view full answer...The Replacement 12-Volt DC Fan Motor, #BVD0218-00, is a replacement for specific Ventline Ventadome or Vanair RV roof vents. The specific model numbers are V2094, V2119 and VP-543. If you have a different model this motor will not be compatible. The…
view full answer...The only made in USA tire cover we offer for 27" to 29" wheel covers is the SnapRing TireSavers Tire Covers part #ST7001WH for white or part #ST7001BK for black. The Adco Tyre Gard RV Wheel Covers part #290-3963 are made overseas.
view full answer...I can certainly help you out with that. The ST205/75R15 tires you have should measure right at 27" in diameter so in this case the most affordable route would be Adco Tyre Gard RV Wheel Covers - Designer Series - 27" to 29" - Tan…
view full answer...For a 14,000 lb trailer, you'll need a Fastway ball mount for a 2-1/2 inch hitch receiver, as the highest capacity of their ball mounts for a 2 inch receiver is 10,000 lbs. So if you have a 2-1/2 inch receiver, you can use any of the following,…
view full answer...The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount #358CLEVIS has a spread of 2-1/2" between the tangs. You would also need the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch #BPH64FR. The combination of this clevis…
view full answer...Thank you for your many purchases, including that for the Fastway Flash E Series Adjustable 2-Ball Mount #FA42-00-2600. We do offer replacement parts including the Main Adjustment Bolt #DTBM24 and the 5/16 Allen Hex Tool #DTBM26. My contact at…
view full answer...Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the big…
view full answer...If you don't know the key number for the current lock on your Flash E Series Adjustable 2-Ball Mount #FA42-00-2600 and the previous owner doesn't know the number, you can still use the ball mount but you will need to get the current lock cut…
view full answer...Filter Your Search
Contact and Help