Search: rv backup camera   >  

The biggest factor to consider when towing a long trailer with a short wheel base tow vehicle is trailer sway. There is no standard ratio for wheelbase to trailer length, but the general rule is a longer trailer and a shorter wheelbase will increase…

The Bulldog Winch Portable Air Compressor #BDW41003 will be able to easily fill up your trailer tires to your 135 psi rating as long as you have it stationed next to your tires. If you plan on running a longer extension out from your garage then some…

I'm not sure what you meant by '100@ duty cycle', but the #BDW41003 compressor you've been looking at has a 10 minute duty cycle (defined as running at 100 psi at 72° F). That means that at 100 psi, you'll be able to run the…

There is not a Flex Air pin box that is designed to replace a Lippert 1716, but there is a model that is extremely similar, the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1716 #MR97VR. This is a cushioned pin box that has…

Yes the Bulldog Winch Compressor #BDW41000 for sure would be able to inflate your tires to 110 psi.

Yes, the MORryde Cushioned 5th Wheel Pin Box #MR55QR will fit your Grand Design Momentum 395MS. The MORryde is designed to replace the Lippert Rhino and will significantly improve your ride quality. It is for 5th wheel trailers with a GVWR over…

The Rear View Safety Backup Camera System #RVS-062710 is a pretty much closed system with each component having a connector to connect to the wiring instead of splicing. Most likely the camera that isn't working has a loose connection so…

The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use #MR46ZR or for 3-1/8 inch shackle links, use…

Yes, all of the correct bolts and hardware are included with the MORryde Suspension Upgrade kit part #MR58ZR that you referenced.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

I recommend the etrailer Trailer Hitch Receiver #e57KR for your 2022 Ford Bronco Sport. This receiver has a hidden cross tube and matte black finish giving it a clean factory appearance. The receiver is rated for up to 525lbs of tongue weight and…