Result: redarc brake controller

Hello Thomas, thanks for reaching out. Blue Ox and Reese are both solid options for a weight distribution hitch. Between the two I would lean towards Blue Ox, just because their systems tend to be a bit more user-friendly and they will offer better…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

For the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is an easy installation with the Tekonsha Wiring Harness #3041-P. You will just use the white connector of the harness along with the wire length and cut off the other end of the…

In order to be able to use the Tekonsha Prodigy RF #TK94FR, or any other brake controller, on your 2016 Subaru Outback you will need to add a 7-way connection. In order to add a 7-way you will need to start with a 4-way. For a 4-way, I recommend the…

I spoke with my contact at Lippert regarding the new axle on your 1977 Scamp Trailer. This axle has a weight capacity of 2,000 pounds. First, if you do not already have them installed on your trailer, you will need compatible hub and drum assemblies.…

Hey Grant! Thanks for all the kind words, we're happy to have you! I absolutely recommend picking up the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item #331-TPSI-007. This was designed specifically for those extra…

Yes, David you are correct. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED82CR is exactly what you need. Since your 2024 Toyota 4Runner came with a 7-way connector, the plug and play adapter included with item #RED82CR will…

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

Hello Frank, thanks for reaching out. Sounds like typical Ford for you lol. We do have a plug-in brake controller option for the 2025 Ford F-250. For that I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED67CR since it…

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

If the 7-way trailer connector you have was equipped from the factory which it most likely was then all you will need to do is plug in the brake controller and then you are good to go. The plug for your 2010 Ford E-450 chassis should be located up…

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.