Search: recessed tie down   >  

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on…

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with…

You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…

Thank you for the kind words, the K-Source Snap & Zap Custom Towing Mirrors #KS80930 are confirmed to fit all models of the 2021 GMC Sierra 1500, that would include the Denali. The mirrors have a cut out in the bottom that fit around the…

Yes, we do have towing mirrors for a 2022 Chevrolet Silverado. I recommend the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side item #KS80930. I personally drive a Silverado and I think some of the towing mirrors…

The 3-1/4 inch diameter hole to install the part #RR5K is the correct dimension to use. We actually even had a customer come back and say they did it with a 3 inch hole saw. I attached a link to the install video you mentioned as well.

You can attach the Brophy Recessed Trailer D-Ring Tie Down with Backing Plate, #RR5K, most anywhere on a trailer. The recessed D-Ring is designed to be recessed in a wood surface (floor, wall) and using the steel backing plate will make a stronger…

90-120 ft lbs of torque is probably about right for your 15 inch trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher. You'll need to know the diameter of the…

The 2 inch spacing you have between the front and rear tires is enough to use Ultra-Fab chock #UF21-001060. It will fit tire spacing of 1-1/2 to 5-1/4 inches. I have included a link to a video review for you. For a set of 2 use #UF21-001070. You can…

Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance for…

The Furrion AC/DC Distribution Panel will work to replace the WFCO WF-8930/50 distribution panel but is not considered an exact replacement. We do not carry a distribution panel that is an exact replacement for that WFCO model but the Furrion will…

The Furrion AC/DC panel part #FDP12WABL that you referenced uses AC power on the input side and on the output side puts out AC and DC power. You do not have to use the AC power on the output side but it does require it on the input side.