Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, the Adapter Rails for Curt 5th Wheel Hitch #C47BR will fit your 2019 GMC Sierra 2500 and allow you to use your Reese slider.
view full answer...The #RP30156 is only designed to work on Ford trucks. There are two options for an adapter that fits your 2020 Silverado 3500. One is the Curt #C88KR you looked at and the other is the Demco #DM6333. Both of these will allow you to install a 5th…
view full answer...I would be happy to help you sort out what system is in the bed of your 2018 Chevy Silverado. I can tell you with 100% certainty that you do not have a B&W puck system because B&W uses the Turnoverball Underbed Gooseneck System item…
view full answer...In 2020 GM changed their trucks by adding 6 inches in length to the cab and 6 inches in height. This pushed everything back on the frame so the puck system for your 2018 Chevrolet Silverado 2500HD is going to be different than the 2022 GMC Sierra…
view full answer...The Curt Adapter Rails for Curt 5th Wheel Hitch part #C88KR weighs around 75 lbs. It will work out perfectly with your Pullrite 2300 auto slide. It uses the industry standard mount spacing.
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…
view full answer...Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…
view full answer...Related Searches
Filter Your Search
Contact and Help