Customers compare RP58305 to these similar products
Products Featured in this Video
Speaker 1: We're going to be installing Reese's chain hangers for Reese's weight distribution systems, part number RP58305. We're going to be using this with Reese's weight distribution system, part number RP67509. The bracket that comes with the kit will just sit over your frame rail, and there would be a bolt that would thread in the back side to clamp it on, so there's no drilling… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I have a great solution for using a weight distribution system with your new V-nose cargo trailer. I recommend using the Reese Chain Hangers #RP58305 with the weight distribution system you choose. These brackets can either be bolted onto or welded…
view full answer...While we do have a hitch option for your 2018 Ford F-150, you won't be able to use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" #DT35MR. This is because the Draw-Tite is designed for truck frames styles of…
view full answer...At this time we do not carry a compatible inner member for your Reliable ACT 7.5 KS actuator so I recommend replacing it with the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR. This hydraulic actuator activates trailer's brakes…
view full answer...The difference between the two systems is basically the attachment point. One is not better than the other except that the trunnion bars are a little easier to install than the round bars that require a clip to hold them into the head. For the round…
view full answer...Reese (manufacturer of the Strait Line) has told me that the use of their weight distribution systems on an aluminum trailer is limited by what the trailer manufacturer states is okay. Since Featherlite has determined that your trailer is fine to use…
view full answer...No worries. We carry trailer roof vent replacement lids and lots of other vent parts so we can get you squared away before the spring thaw. Most square trailer roof vents are 14 x 14-inch and the main thing to note on your original vent lid is the…
view full answer...In order to determine what vent cover replacement is needed for your 2008 Keystone Hideout Travel Trailer you will just need to identify the hinge type. For example, if you have a closed continuous hinge, you can use the Metal Low Profile Replacement…
view full answer...I have a solution for you but I contacted my tech contact at Pro Series and he said you will not be able to fit the snap-up brackets on the Pro Series Weight Distribution System #RP66542 on your Brimar Low Profile HD Dump Trailer. The toolbox sitting…
view full answer...Thanks for reaching out, Randall! The correct replacement bearing kit for your 3,500 lb Axle Technology BD3545 axle is the #84 Spindle Hub Bearing Kit #BK2-100. This comes with the following parts: - Inner Bearing #L68149 - Outer Bearing #L44649 -…
view full answer...The brackets welded to the frame appear to be standard hangers for a chain-style weight distribution hitch. Since the brackets are 30" back from the ball, I recommend using the Reese Weight Distribution System #RP67509. This requires the…
view full answer...Most weight distribution spring bars are about the same length. Typically they are either 29 or 31 inches in length. The spring bars of the Curt #C17062 would be 30-5/8 inches, and the bars of the #PS49583 would be 31-1/4 inches.
view full answer...Weight distribution spring bar tension can be increased by tilting the head toward the trailer so that the ends of the spring bars are closer to the ground. Once connected to the lift brackets this increased angle translates into more tension, which…
view full answer...