Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
We have some grill mounts but they are for specific grills and not your blackstone griddle. You could set the griddle on the Mount-n-Lock GennyGo Bumper Mount Carrier like this #MNT44FR.
view full answer...The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…
view full answer...If the base plate Item #RM-521453-4 did not come with thread locker then we recommend using red loctite Item #LT37420. The instructions will tell you what thread locker to use. I have found the if it is not in the kit it will be red. As far as the…
view full answer...It sounds to me like you might have an issue with the connection of the ICX transmitter and the brake signal from the towed vehicle. You're getting the power to the ICX transmitter to activate the Even Brake #RM-9400 but not the signal from the…
view full answer...Both are great options for your 2022 Dodge Durango but there are a few key differences between the Brake Buddy Select 3 #HM39524 and Classic 3 #HM39494. The biggest difference between the two is that the Select 3 has two braking modes; proportional…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...The Replacement Remote Mounted SD Control Module for BrakeRite II T4834200 was discontinued a little over a year ago back at the start of 2021. So while it might be the correct replacement for your system, it isn't readily available on the market…
view full answer...To measure the width of a trailer wheel you will measure from where the tire beads will seat on the wheel. That will be from the inside of the inner wheel flange to the inside of the outer wheel flange, not from edge to edge of the wheel. To measure…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...Absolutely! B&W recommends the Locking Pin Kit from Infinite Rule, which we carry as part #34061775-D. The locks are manufactured in the USA, are keyed alike and are specifically designed for the B&W Tow and Stow so they fit perfectly. The…
view full answer...My recommendation is to use a replacement drop shank like the Equal-i-zer Weight Dist Shank #EQ90-02-4400. This shank is capable of up to 9" of drop and will work with weight distribution hitches that have a 1-1/4" vertical hole center…
view full answer...Hey Ralph, thanks for reaching out! Yes, the Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR can be used to flat tow your Jeep Wrangler using a Blue O tow bar.
view full answer...