Is this right for you? Product Expert Alexander C says:
Yes, if you:
Need a mount that is built like a tank for your tough towing jobs
Want to carry a bike rack while you tow or attach a spare tire above your tow bar
Tow with a lifted truck
No, if you:
Can't lift a heavy, bulky mount or have nowhere to stow it when it's not on your truck
Frequently drive around winding roads, because the mount can wobble
Don't want to spend a premium cost
Insert this heavy-duty mount into your 2" hitch to get 6 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory. Lowest Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K part number 325-GH-516 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
All Info
Reviews (49)
Q & A (7)
Related Parts
Photos
Why etrailer?
Gen-Y Hitch Trailer Hitch Ball Mount
- 325-GH-516
Adjustable Ball Mount
Fits 2 Inch Hitch
Drop - 12-1/2 Inch
Rise - 12-1/2 Inch
Gen-Y Hitch
2 Inch Ball
2-5/16 Inch Ball
Two Balls
16000 lbs GTW
Stacked Receivers
Steel Shank - Gray
Steel Ball
Insert this heavy-duty mount into your 2" hitch to get 6 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.
Features:
Adjustable ball mount lets you hook up your trailer to your tow vehicle
Shank slides into hitch receiver on your vehicle
2" Ball or 2-5/16" ball provides connection point for trailer coupler
6 Stacked receivers accept included ball mount, as well as other hitch-mounted accessories
2 Pins included to secure accessories to shank
Adjustable height lets you tow trailers of different heights with the same vehicle
Drop ball mount lower or raise it higher to match your application
Ball mount can be used in drop position only
Heavy-duty steel construction
Zinc primer and powder coat finishes resist corrosion
Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
SAE J684 certified
Made in the USA
Specs:
Application: 2" x 2" trailer hitch receivers
Built-in receiver size: 2" x 2"
Maximum drop: 12-1/2"
2" Ball capacity:
Gross towing weight: 12,000 lbs
Maximum tongue weight: 1,500 lbs
2-5/16" Ball capacity:
Gross towing weight: 16,000 lbs
Maximum tongue weight: 2,000 lbs
Overall height: 15-5/8"
Total length with included ball mount installed: 16"
Total length without ball mount installed: 12"
Hitch pin hole diameter: 5/8"
Accessory pin hole diameter: 5/8"
Note: Because this mount has a significant drop, a stabilizer kit (sold separately) is recommended to prevent wobble and to keep the mount stable as you tow.
Multiple Stacked Receivers for Easy Adjustment
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 6 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
With the 6 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover. This heavy-duty mount is built with a 2,000-lb tongue weight, so you can even use multiple hitch accessories at the same time, as long as there are no clearance issues. This means that you can use your hitch-mounted bike rack to haul your bikes while also flat towing your vehicle.
GH-516 GenY Hitch Adjustable Versa Ball Mount for 2" Hitch Receivers - 12.5" Drop - 16,000 lbs
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K - 325-GH-516
Average Customer Rating: 4.9 out of 5 stars (49 Customer Reviews)
Insert this heavy-duty mount into your 2" hitch to get 6 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.
- 325-GH-516
by: Jake05/22/2019
Showed up on time. Needed a heavy duty hitch for my lifted super duty. Used for first time today and worked perfectly. My beaver tail landscape trailer has to towed level or it bottoms out. With this hitch no worries about towing level. Great product!
644832
Dealing with etrailer was perfect.
Product was exactly as required.
807696
- 325-GH-516
by: Kevin07/12/2018
Beautiful hitch and performs well. Very fast shipping as well!
540920
Comments
Perfect! A do it all hitch!
Kevin - 07/12/2019
57728
- 325-GH-516
by: David04/20/2019
Writing this before I have actually used the hitch. So far I'm very impressed. The hitch arrived here in west central Ohio in 2 days with the free standard shipping'
Extremely well packaged. The Hitch is built like a tank I expect to have this for as long as I have an RV
633770
- 325-GH-516
by: Shannon01/21/2021
Looks great and will work great. 941001
- 325-GH-516
by: Roger08/20/2020
Very heavy...probably heavy duty as wel l!
865180
- 325-GH-314
by: Renard05/11/2019
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Haven't used the product but I have no doubt it will do the trick. I'm a over thinking, over prep kinda guy so...if I had any doubts this was the best option, I wouldn't have purchased it. etrailer...so...I'm pretty impressed with your sales/customer support. I received very quick responses to specific "will this work with this thing?" questions....and the answers were on target AND specific. No generalities, no sales pitch BS. If my idea wasn't the best...I got an alternative, along with part numbers, pictures etc. AND...I ordered this on a Thursday afternoon, and got the part delivered the next day. FREE Wasn't next day service...just happened that way. Pretty freakin nice.
640854
Comments
Well, Im sure the product is ok but it becamse immediately apparent it would not work for my configuration. Pretty much a waste of $300 but that was a risk I took.
Renard - 05/18/2020
76881
- 325-GH-515
by: William Brown08/22/2019
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
This item is so universal also a good deflector if you might get rear ended! Perfect fit for my 2013 Nissan Rogue. Thank you etrailer.com Very good Engineering... William
692584
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
I love this hitch. It is exactly what I wanted for my new f150. It is beefy and I expect it to last a very long time. Etrailer.com was equally as amazing. I ordered the mount with 4 day shipping because we had a weekend at the lake planned with our boat. I ordered it around 5 pm. THEY SHIPPED IT AT MIDNIGHT. It arrived in 2 days. Just wow.
876851
- 325-GH-316
by: Dave08/02/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Haven't used it yet but this thing is very well built. I moved away from a wrap around style drop down hitch to this, machined pockets for the ball, the wrap around style has too much movement with heavier loads. Shipping and price very good as well in my opinion.
854504
- 325-GH-514
by: Marcus02/09/2019
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Exceptionally well made. Looks good on the truck Will allow me to use my existing weight distributing hitch on my new and higher truck.
603663
Comments
Excellent this is a really good hitch I have used it to tow 10000 pounds with no problem.
Marcus R - 02/10/2020
66511
- 325-GH-513
by: Austin06/15/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
The hitch is everything I wanted and couldn’t be more pleased how it performs! The only complaint I have is when I received the hitch is that the powder coat was chipped away in two spots and down to the bare metal. I contact etrailer and was told by one of there customer service reps that it’s a common occurrence and normal to receive a hitch with scuff and chips because of the way it’s stored in the warehouse, I just hope they can improve on this on the future. The product works awesome and I couldn’t be happier for how it looks and performs on towing the many different trailers I have!
815789
- 325-GH-214
by: Thomas05/11/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Adding to the back of my Newmar Dutch Star to provide a 3 to 4 inch drop for my flat towing of a Ram 1500 with Blue Ox setup.
A little disappointed that there is a little play in the connection to DS tow hitch, just a slight wiggle. Got a J-Pin, but Newmar hitch didn’t have 2 holes.May use the top holes for some sort of carrier ( bike or spare ).
Didn’t have need for ball hitch, but maybe in the future.
Infinite pins DID NOT work with this 16k ball mount - too short.
795555
- 325-GH-315
by: Christopher08/13/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Well built and Heavy Duty. Just watch the apron inclines with the double ball down low, its a surprise jolt when it hits the ground.
861167
- 325-GH-317
by: Evan09/28/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Great product came when it was supposed to with no delays. This definitely won’t be the last one I buy!
894089
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
The hitch is one great heavy heavy duty unit! We have 2 trailers, each with a different size ball. With this unit we can quickly adjust for different trailer heights and ball sizes. definitely worth the money.
725029
- 325-GH-515
by: JD01/21/2021
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
This thing is a beast, I knew it would be stout for the weight it's approved for but dang - very well made!
940824
- 325-GH-316
by: Eric08/22/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Used on 2020 Jayco Seneca 37K motorhome. Product is really well built and easy to use. So far only towed about 50 miles, this has leveled our auto hauler trailer.
866830
- 325-GH-514
by: Gen-y customer02/12/2021
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
I purchased the gen-y mega duty 7.5 drop 2 inch shank 16k with the versa ball and couldn’t be any happier! This thing is perfect for my trailer and can’t wait to haul my dads trailer he has a 16 ft one. one hitch can do it all. Shipping was fast came in like 3 days.
956998
- 325-GH-317
by: Mike M.r.p Lawn Care01/06/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Tryed almost every drop hitch out there in canada but this product I had for 1 year now and it is a monster I recommend highly for lifted trucks, Amazing product.
736103
- 325-GH-514
by: Jeremy08/04/2020
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Hitch is well built and as always, Etrailer.com delivered fast!
855413
- 325-GH-515
by: James05/04/2019
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
We live on an Island in SW Florida where everyone has some sort of Hitch, mostly for Boats. After Lugging this Beauty out to our 34ft Class A Motorhome, we installed our Tow Dolly and Double Bike Rack, and everything came together. The non-rattle screws worked great on the Bike Rack. The 10in Drop leveled the Dolly Tounge just right. We are off to be Full Time RVers, never to worry about Towing again... Thanks..
637813
- 325-GH-515
by: Gregory05/22/2018
Review from a similar Stacked Receiver Drop Hitch in Trailer Hitch Ball Mount
Great product -it fit my sons truck perfectly. Susan H. Was excellent to work with. She is a good customer service rep.
512209
If you are measuring from the inside top of the receiver to the bottom of your coupler then you have a 13 inch drop. I've attached an article to help, but have also included a photo for fast reference.
That is a significant drop, so you can use one of the following:
Gen-Y Adjustable 2-Ball Mount - 2" Hitch - 12-1/2" Drop - 10K # 325-GH-316
Gen-Y Adjustable 2-Ball Mount - 2" Hitch - 12-1/2" Drop - 16K # 325-GH-516
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch -... view full answer...
The largest rise/drop we offer is the # RM-048-10 from Roadmaster that offers a 10-1/4 inch rise or drop. You want to be within 3 inches plus or minus of level, and this adapter would put you within that range.
If you click the provided link, you can see a product description video featuring the adapter.
This being said, the Gen-Y adjustable ball mount you have looked at # 325-GH-516 would also work well for you, and would allow you to get a bit closer to level. view full answer...
Yes. The Gen-Y Adjustable 2-Ball Mount # 325-GH-516 will mount directly into the receiver on your 2015 Ram 2500 Diesel and allow the coupler on your trailer to connect to the ball mount. This is a great solution for lifted trucks or trucks with larger tires, like yours, and the Gen-Y hitches are extremely durable. This is the option I would absolutely recommend for this setup. view full answer...
If I understand you correctly, it sound like you have a couple of things going. On level ground you want to tow as level as possible, but you don't want to bang up your trailer going in and out of your driveway. I recommend you go with an adjustable ball mount like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K # 325-GH-516 or the 15" Drop - 10K # 325-GH-317. This comes with the adjustability to adjust the hitch ball down to give you the driveway... view full answer...
You most likely have a Gen-Y hitch that is compatible with a 2" receiver like part # 325-GH-516. This means that you would need to use the Gen-Y Hitch Pin # 325-GH-096 which is comparable to the locking hitch pin # WS05.
If you happen to be using a Gen-Y hitch that fits a 2-1/2" receiver, like part # 325-GH-624, then the Gen-Y Hitch Pin # 325-GH-099 that comes with it is comparable to the locking hitch pin # BD580412. view full answer...
Yes, the Gen-Y Adjustable 2-Ball Mount # 325-GH-516 that you referenced will fit and work great with the factory 2 inch receiver on your 2010 Toyota Sequoia.
This heavy-duty ball mount features up to a 12-1/2 inch drop or rise and a gross towing weight capacity of 12,000 pounds when used with the 2 inch ball. This capacity increases to 16,000 pounds when using the 2-5/16 inch ball but you will still need to adhere to the limits of your Sequoia if it is lower. The towing capacity of... view full answer...
For your weight distribution shank I recommend the Reese Weight Dist Shank - Drop Only - 11" Long # RP3344. This shank will give you a 7-5/8" drop using a trunnion-bar system or a 8-5/8" drop using a round bar system.
If you have a round bar system, you can get a deeper drop of up to 9-1/2 inches with the Curt # C17124.
These are the deepest drop shanks we carry based on the bar style of your system. If you need a deeper drop then you will need to use the Gen-Y stackable ball... view full answer...
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality trailer hitch ball mount for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.
Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
Most detailed, accurate trailer hitch ball mount information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.
Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.