Blue Ox Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 4" Rise/Drop - 10,000 lbs

See what our Experts say about this Blue Ox Hitch Adapters

• Recommended 4" High Towing Adapter for Flat Towing
  I recommend the Roadmaster High-Low Adapter for Tow Bars item # RM-048-4. This high low adapter will provide a 4" drop. To be considered level the tow bar needs to be within 3" of your base plates.
  view full answer...
• Parts to Flat Tow 2007 Chevy Tahoe and 2018 Ford F-250 with Crossover Parts
  Id be more than happy to help you out with the parts needed to flat tow both your 2007 Chevy Tahoe and your 2018 Ford F-250! I'll go ahead and list out the parts for each vehicle and I'll add a tag next to the parts that can be used for both. The Air Force One parts that will fit to your vehicles will cost more for both sets than some of the other braking systems will, but since you already have the one part installed on your Ventana and it's a really easy system to use once it's installed...
  view full answer...
• How Far Does The Blue Ox Adjustable Drop Hitch Receiver Adapter # BLU34TR Extend Out?
  The Blue Ox Adjustable Drop Hitch Receiver Adapter # BLU34TR extends the receiver out 13-1/2". Do understand this adapter is only able to be used with tow bars for flat towing a vehicle.
  view full answer...
• Is Hitch Extender Needed With Blue Ox BX8870 KarGard Towed Vehicle Protector
  According to Blue Ox, users of the Blue Ox # BX8870 KarGard typically don't need an extender to increase the distance between the motorhome and the towed vehicle because the KarGard will sit pretty close to the vehicle being towed (about 1 foot). If you should find you need an extender, Blue Ox tells me that it's acceptable to use the # BX88264 for 12 inches of extension or # BX88265 for 6 inches of extension, but the tow bar will need to be within 3 inches of level. They go on to say...
  view full answer...
• Is there a Hitch Extender for a Weight Distribution System?
  Congrats on your new purchase! There isn't a hitch extender that is compatible with a weight distribution system but I do have a solution for you. You can use the Equal-i-zer Weight Dist Shank item # EQ90-02-4600 so long as you have the standard 1-1/4" spacing between adjustment pin holes on your weight distribution system. Swapping out the shank on your current system with the Equal-i-zer item # EQ90-02-4600 would give you an additional 6" of clearance.
  view full answer...
• Best Parts to Flat Tow 2021 Kia Soul With Manual Transmission
  There are a number of parts you will need in order to flat tow your 2021 Kia Soul with a manual transmission, and I'll be happy to recommend the best parts that are the easiest to use for you. The best parts for you are the following: - Base Plate Kit: Blue Ox Base Plate Kit # BX2727 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play...
  view full answer...
• Parts Required to Tow 2016 F-350 Behind Class A Motorhome
  To safely and legally flat tow a vehicle like your F-350 behind a motorhome you will need a few components. These include a tow bar, mating base plates, safety cables, a wiring/lighting solution of some kind, a high/low hitch adapter and a braking system for the towed vehicle. Each of these items is discussed in the linked overview article on the basics of flat towing. I also included articles specifically concerning high/low adapters and supplementary braking systems. Reviewing these is...
  view full answer...
• Parts Needed to Flat Tow 2019 Ford Expedition
  I have been reviewing the base plate kits made for 2019 Ford Expeditions. Each of them require trimming out the fascia where the tow hooks would have went, or to remove those tow hooks. I would not be surprised if a little extra trimming in that area was necessary. You will also need to mount the 6-pin connector up in the grill area. While a little trim here, scuffs from safety cables there, and a couple screw holes would probably go unnoticed by most, an experienced appraiser will probably...
  view full answer...
• How To Use etrailer Tow Bar on a 2020 Jeep Wrangler
  In order to use the etrailer XHD Non-Binding Tow Bar part # e94ZR on a 2020 Jeep Wrangler you'll need to use the etrailer Invisible Base Plate Kit part # e98948. In addition to this you'll also need some other items which I have listed for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 If the tow bar is not within 3" of level then you'll also need a high-low adapter like the Blue...
  view full answer...
• Do I Go By Hitch Receiver or Ball Mount Tongue Weight Rating To Be Safe
  Great question! You always need to stick with the lowest rated component so even though the Blue Ox Adjustable Drop Hitch Receiver Adapter # BLU34TR has a 1,000 lb weight capacity you'll be limited by the 350 lbs of your hitch receiver tongue weight rating. Attached is a review video for you to check out.
  view full answer...
• Recommended Parts to Dinghy Tow a 2017 Chevrolet Sonic LT Sedan
  I have the perfect setup to dinghy tow your 2017 Chevrolet Sonic LT. For a tow bar I recommend using the Blue Ox Base Plate Kit, part # BX1703. This kit does not require any welding and has base plate tabs that can be removed for a very clean look when you are not towing your Sonic. The next thing that you will need is a tow bar. I really like the Blue Ox Alpha, part # BX7380, for this setup because it works well with the base plate kit and it comes with safety cables. This tow bar it...
  view full answer...
• High Low Adapter that Can be Used in Stealth Hitch Of 2022 Tesla Model 3
  You could use a high low adapter like the adjustable Blue Ox Adjustable Drop Hitch Adapter part # BLU34TR which can give you up to a 4 inch lift for your hitch accessories in the Stealth hitch part # 391TES317 that fits your 2022 Tesla Model 3.
  view full answer...
• Can a 2002 Volkswagen Passat Wagon with Manual Transmission be Flat Towed
  When it comes to flat towing a vehicle the car owner's manual is the best resource for determining if it can be flat towed at all and what preparations steps, if any, are required to ready the car for this kind of transport. In general, cars with a manual transmission are often easier to equip for flat towing than cars with an automatic transmission. I reviewed an online edition of the owner's manual for the 2002 Volkswagen Passat wagon but it did not confirm if the car can be flat towed....
  view full answer...
• 4 inch High Low Adapter for Use with Commander 2 Tow Bar
  It would seem that the Demco High Low Adapter would work fine with your Commander but since they specifically said that it only fits the Victory Series tow bars since that's only tow bar that tested it for we have to recommend you follow that, but we can still help. We have the Blue Ox High Low Adapter part # BX88129 which provides 4 inches of rise/drop and can be used with any tow bar including your Commander 2.
  view full answer...
• Flat Towing A 2016 Jeep Liberty Where Motor Coach Only Has 4-Pole Lighting Connector
  First you will need the Roadmaster # RM-521423-5 Direct Connect Base Plate Kit so you can hitch to your Jeep. The hooks and brackets for tow hooks will have to be removed. Add to that a tow bar. I would recommend the Roadmaster # RM-522 All Terrain – Non Binding tow bar. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. The tow bar is the one point in flat towing that gets the most stress...
  view full answer...
• Universal Wiring Kit For 2012 Subaru Outback Plus Other Recommendations
  Yes, we have the Roadmaster # RM-155 Tail Light Wiring Kit with bulbs. I reached out to my contact at Roadmaster and he confirmed that this would work with your 2012 Outback to provide rear vehicle lights. I have included a link showing the installation on a Chevy Spark. Normally, when flat towing a 2012 Subaru Outback behind an RV, I would recommend a tow bar Universal Wiring Kit like the Roadmaster # RM-152-98146-7. This complete kit includes everything you need to connect your RV's...
  view full answer...
• Typical Professional Installation Time for Blue Ox Base Plate Kit # BX3788 on 2015 Toyota Corolla
  I am not trying to avoid directly answering your question but the exact amount of time needed to complete a base plate installation on a vehicle can vary quite a bit. The particular equipment on a vehicle, the installer's experience and even the nature of the equipment in the shop can have an effect on the time required. Even with a well-qualified shop and technician, if it is the first time a particular base plate kit has been installed on a particular car, it will take longer than if...
  view full answer...
• Can Dual Hitch Balls Be Added to Blue Ox Adjustable Drop Hitch Receiver Adapter
  Hey Ward, thanks for reaching out! The Blue Ox Adjustable Drop Hitch Receiver Adapter # BLU34TR does not have an adapter that fits to make it compatible with towing because this was designed for flat towing situations. For your application I recommend using the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-524 because it gives you the height-adjustability that you're needing, as well as the dual ball mount setup you're needing.
  view full answer...
• Tow Bar for Blue Ox Base Plate BX1131 on 2011 Jeep Liberty Renegade
  According to Blue Ox, the Blue Ox Base Plate Kit # BX1131 is only compatible with motorhome-mounted tow bars, so it will not work with your BX4212 car-mounted tow bar. We do have tow bars which will work, and for that I recommend the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This is a great value for a tow bar that has long arms for maneuverability and also has safety chains so you don't have to purchase those separately. Along with Tow Bar # e47ZR and Blue Ox Base...
  view full answer...
• Recommended Blue Ox Parts Needed to Flat Tow 2016 Chevy Colorado
  We can help you with everything you'll need for safe and legal flat towing of your 2016 Chevrolet Colorado. The essential items include a tow bar, safety cables, a wiring/lighting solution, base plates and a supplementary braking system for the towed vehicle. Often a wiring extension and a high/low adapter are also required. The linked article covers each of these in detail. Blue Ox offers base plate kit # BLU93FR that fits the 4WD 2016 Chevy Colorado with or without the Adaptive Cruise...
  view full answer...
• Parts Needed to Flat Tow 2016 Ford Fiesta Titanium Behind a Motorhome
  We can help you with the process of researching your options in flat towing equipment for when you're ready to tow your 2016 Ford Fiesta Titanium behind a yet-to-be-acquired motorhome. We have a comprehensive article on flat towing (plus a few others concerning specific towing items) that you can review for background and to show you the options. There are indeed many options when it comes to braking systems and wiring/lighting kits and these vary considerably in price and in how invasive...
  view full answer...
• Parts Needed to Flat Tow 2020 Equinox Premier Ed. With LED Taillights and Active Aero Shutters
  I would use the Roadmaster # RM-523193-5 Base Plate Kit for Direct-Connect. From looking at the attached instructions (Figure T) the only trimming is to a small area on the left and right of an air dam, behind the grill. You can see the shutters at the top of that figure and they do not appear to be affected. I have also attached a video demonstration of the installation. This base plate will pair perfectly with the Roadmaster # RM-520 “Falcon 2” standard tow bar rated for 6000 pounds....
  view full answer...
• Items Needed to Flat Tow 2013 Chevrolet Silverado 1500 Behind Class C Motorhome
  We can help. Safe and legal flat towing requires a few items, including a tow bar, safety cables, a wiring/lighting kit of some kind and a braking system and base plates on the towed vehicle. Also a high/low hitch adapter often comes into play too, which can help you get the tow bar close to level (important for good performance). You can refer to the linked articles on flat towing for more on each of these items. Let's start with base plates for the 1500. I recommend the Blue Ox kit...
  view full answer...
• Parts Needed to Flat Tow 1999 GMC Denali
  A complete flat towing setup consists of base plates, a compatible tow bar, safety cables, tow bar wiring, supplemental braking and potentially a high/low adapter. I recommend starting with the Roadmaster MX Base Plate Kit # 3101-1 and the etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate - 2" RV Mount # e74ZR. This tow bar comes with safety cables integrated and the non-binding design helps make hookup and release easier when you're on un-even ground. The Roadmaster...
  view full answer...

Do you have a question about this Hitch Adapter?