See what our Experts say about this Optronics Accessories and Parts

• Bullet Connector Size and Wire Length for Optronics ThinLine Mini LED Light MCL-91AK
  Welcome back Bill. The Optronics ThinLine Mini LED Light # MCL-91AK uses a 0.156" bullet connector and a 12" wire lead. The replacement wire is # A91LW if you need one. Are you replacing an existing light or installing new ones?
  view full answer...
• Single Plug and Wire for Thinline LED Clearance and Side Marker Light
  Hey Eric! The single wire for the Thinline LED Clearance and Side Marker Light # AL91RB is the # A91LW. If you need the self-grounding mounting bracket it is # A91BB for black or # A91CB for chrome. Don't hesitate to reply below if you need anything else.
  view full answer...
• Surface Mounting Bracket For Custer LED Side Marker/Clearance Light CPL26-A
  Hi Adam! We do have another option that will fit the exact same way, but I am sad to say the Custer bracket is no longer available. The Custer LED Side Marker or Clearance Trailer Light # CPL26-A snaps into the Optronics bracket # A91CB perfectly (almost too perfectly as it took a slot screwdriver and some patience to get it out when I test fit them together). Unfortunately, it does only come in silvery chrome finished plastic, but it could very easily be rattle canned to whatever color...
  view full answer...
• What is Used to Connect Running Light Circuit Trailer Wire to Both Sides of Trailer
  Hey Jim, there isn't a connector specifically designed for combining the three wires needed to power the running light circuit on both sides of the trailer so you would need to run all three to a butt connector like the part # DW05714.
  view full answer...
• Replacement LED Taillight Recommendation for 2002 Shoreland'r Profile 2000 Boat Trailer
  We do indeed have some LED taillights that'd work great on your boat trailer. I'd recommend # STL57RB for the driver side and # STL56RB for the passenger side. These lamps measure 6-1/16 x 2-5/8 inches, and would work well on your trailer. As you can see in the photo provided by one of our customers, the taillight works well on a Shoreland'r trailer. As long as they're still working okay, you certainly may leave the existing fender running lights in place. If you decide you want to replace...
  view full answer...
  
• Replacement Amber Clearance Light for a Peterson PM 150
  Sealed lights would have to be replaced since there is not easy way to get them open and maintain functionality of the light. Your light looks similar to # A91AB. This light measures 2-1/2 inches across, 1-3/16 inches tall and 7/8 inches deep. It mounts in base # A91BB and can use harness # A91LW.
  view full answer...
  
• Replacement Boat Trailer Clearance Light with SAE P2 91 DOT on the Lens
  The number on the lens that you see is the lens rating, not a part number so it is difficult to go by that number. There might be a part number on the back of the light housing. Otherwise it would be easiest to go by the dimensions of the light. For example light # A91RB does have the same lens rating. It would use a base such as # A91BB and wiring harness # A91LW for the power wire.
  view full answer...
• Replacement Amber Mini Trailer Clearance Light For Wesbar 3395
  We have just what you are looking for. The replacement clearance light we offer is the Optronics Mini Rectangular Clearance Light, part # A91AB. This is an amber light that measures 2-1/2 inches long x 1-3/16 inches wide x 7/8 inch deep. This light requires the # A91LW pigtail to complete the wiring and a mounting bracket. The bracket is available in black, part # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• Replacement Wiring Needed for a 6 x 10 foot Trailer
  We don't actually manufacture our wiring harnesses, but we do have some options available for you. You can use the Wesbar Wiring Harness # 002220 to replace the wiring on your 6 x 10 aluminum trailer. To complete the installation you will only need a Ring Terminal # DW05702-1 and Butt Connectors, part # DW05744-5 for 5 or part # DW05744-10 for 10. Just simply splice in the lights that you have into the wiring. If you don't already have lights then you can use the Trailer Light Kit #...
  view full answer...
• Replacement 2-1/2 x 1-1/4 Inch Amber and Red Trailer Clearance Lights and Chrome Base
  Based on your picture it looks like you are in need of some replacement lights and a bracket. It looks like you will need amber light # A91AB, red light # A91RB, and bracket # A91CB. And if you need the single wire (since the lights will ground through the bracket and mounting hardware) use # A91LW.
  view full answer...
  
• Replacement Tailgate Marker Lights for 1984 GMC C-Series Dually Pickup
  Yes, from what I found, you can use # AL91RB LED lights to replace the five original incandescent tailgate lights on your 1984 GMC C-Series Dually Pickup. These are standard size clearance lights (2-1/2 x 1-3/16) that were used on a variety of different trailer and some truck OEM applications and were sold under a number of brand names. Keep in mind that these lights don't have wires coming out the back, so in order to install them you'll also need a mounting bracket # A91BB to provide...
  view full answer...
  
• Is there a Grommet for Peterson Clearance Light # M152A
  For a rubber grommet that will fit the Peterson clearance light # M152A you can use # A91GB. If you are looking for the plastic base we do not carry that particular model and in that case I recommend switching to light # A91AB and using bracket # A91BB with power wire # A91LW (the light grounds through one of the mounting screws with this light and bracket combination).
  view full answer...
• Will LED Clearance Light Work With One Wire
  Yes, the Thinline LED Clearance and Side Marker Light - Submersible # AL91AB will work with your single power wire, as it uses a 2-wire (one for power, one for ground) pigtail or 1-wire pigtail with a self-grounding bracket. To mount this light you have a couple options. The first is the Mounting Bracket # A91BOB with Right Angle 2-Wire Pigtail # A46PB; you'd also want to use the Self-Tapping Screw # 1131832. Your other option to mount this light is to use Self-Grounding Mounting Bracket...
  view full answer...
  
• Wiring Pigtail and Mounting Bracket Options For Installing Thinline LED Clearance And Marker Lights
  The Thinline LED Clearance and Side Marker Light # AL91AB require certain mounting brackets and plugs that are either already installed on the trailer or are available separately. A Right Angle 2-Wire Pigtail # A46PB will work with the Grommet # A91GB if you are looking to recess the light. Or Mount Brackets # A91OB and # A91BOB if you want to mount them on a surface with the wiring running behind the bracket. The Plug - Single Wire # A91LW is used for Mounting Brackets # A91BB and...
  view full answer...
• How to Wire up the Thinline LED Clearance and Side Marker Light to Single Wire Trailer
  To use the # AL91RB on a trailer that has one wire for the power wire and then grounds through the mounting bracket would only require the bracket part # A91BB for the bracket and then part # A91LW for a single wire connector.
  view full answer...
• Is Female Plug Available For Single Wire Male Plug For A91 And AL91 Series Trailer Lights
  The single wire plug # A91LW is designed to plug into a light that has the female plug already installed on the back of the trailer light. The # A91LW has a 12 inch lead wire with the male plug attached. Many of the Series 91 lights have two female plugs which would use the standard 2-prong wire like part # A46PB. If you use a self-grounding bracket like part # A91BB for a series 90 or 91 trailer light, the single wire # A91LW can be used.
  view full answer...
  
• How Does Optronics Clearance Light MCL-91AK Wire to Two Wire Trailer
  You'd wire the # MCL-91AK by using the bracket the part # A91BB and the single wire part # A91LW. You'd run the power for the light to the single wire and then run the ground wire you have to the mounting hardware of the bracket as it is designed to ground through it.
  view full answer...
• How to Determine if Amber Clearance Light Will Work on Trailer
  In order to determine if the Thinline LED Clearance and Side Marker Light # AL91AB will fit your trailer you simply need to measure your light and see if it matches; this light is 2-1/2" long x 1-3/16" wide x 7/8" deep. It is also a great option because it can be either recess or surface mounted. For a surface mount you will use Self-Grounding Mounting Bracket # A91BOB with Plug # A91LW. For a recess mount you will use Grommet # A91GB with Right Angle 2-Wire Pigtail # A46PB. I have added...
  view full answer...
• Brackets and Wiring for Sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB
  We do have the parts you need to complete installation of the light. But first, sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB does not include a base or wiring harness. We have the compatible bases listed as related products on the right hand side of its product page. There is flush mount grommet, # A91GB Self-grounding black bracket, # A91BB Black bracket with open back, # A91BOB Chrome bracket with open back, # A91OB Self-ground chrome bracket, # A91CB For...
  view full answer...
• Looking for Boat Trailer Clearance Light to Replace Signal Stat 1500
  According to my Optronics representative, the # AL91RB marker/clearance light you mentioned is a direct replacement for the Truck-Lite 15 series. The Signal Stat 1500 is how Truck-Lite refers to the same lamp in its LED version. A mounting bezel is available, part # A91BB for black or # A91CB for chrome plated ABS. If either one of these self-grounding bezels is used, use a # A91LW pigtail. If a non grounding bezel or bracket is used, a two wire pigtail like part # A46PB would be needed.
  view full answer...
• Wiring Pigtail Harness for Sealed, Mini Rectangular Trailer Clearance and Side Marker Light A91RB
  For a 2-prong pigtail for light # A91RB you can use # A46PB. If the bracket for the light has the ground connection in it, such as # A91BB, then you can use a single wire pigtail # A91LW.
  view full answer...
• Wire Gauge for Single 12" Wire for A91 and AL91 Series Trailer Clearance, Side Marker Lights
  I went out to the warehouse and pulled a single wire plug # A91LW to determine the wire gauge used. It is an 18 gauge wire so very small and thin. This is because it is designed for trailer light applications that do not draw a lot of power so a larger gauge isn't needed.
  view full answer...
• What Wiring and Accessories are Needed For Side Marker Trailer Light # A91AB
  The Sealed, Mini Rectangular Trailer Clearance and Side Marker Light, # A91AB, requires a pigtail and a mounting bracket. The pigtail is # A91LW. I have included a link to a video showing a typical installation for you. For a bracket, there are a couple of options. For black, use # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• How Does Clearance Light Included with Trailer Light Kit part # TL16RK Wire to Trailer
  The clearance lights of the # TL16RK are the part # A91AB with the bracket part # A91CB. The assembly grounds through the mounting hardware and the single wire part # A91LW that comes with it runs to the running light circuit of the trailer like you mentioned.
  view full answer...

Do you have a question about this Accessories and Part?